Closed rabarar closed 5 months ago
Are you able to see directory listings when you choose "Load ROM from SD card"? It should show all files on the SD card.
I am not… On Mar 10, 2024, at 7:19 PM, nand2mario @.***> wrote: Are you able to see directory listings when you choose "Load ROM from SD card"? It should show all files on the SD card.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
Please try the new 0.5 version. See if this is resolved.
Will do - on a plane now. Will report back later this eveningOn Mar 12, 2024, at 8:18 AM, nand2mario @.***> wrote: Please try the new 0.5 version. See if this is resolved.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
I load the the 0.5 version - and noticed (on both versions) when I attempt to load (option one), the screen flashes the error message "error opening director 99" and returns to the menu screen - it's insanely fast and easy to miss as it's at the bottom of the screen.
I tried using a different SDCard and a different program to write to the card - both give the same error above
looks like the issue is in load_dir( )
- it's returning 99 -- that happens when sd_init( )
fails in one of two locations ...
in firmware.c
Looks like a card compatibility problem.
What type of microsd card are you using? Could you post a picture or link of the card? I can get one and try to solve this.
Will do. Traveling, back Sunday. They were sandisk 32g ultra - I’ll send a picOn Mar 15, 2024, at 5:58 AM, nand2mario @.***> wrote: Looks like a card compatibility problem. What type of microsd card are you using? Could you post a picture or link of the card? I can get one and try to solve this.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
Was able to get my wife to send me a picOn Mar 15, 2024, at 5:58 AM, nand2mario @.***> wrote: Looks like a card compatibility problem. What type of microsd card are you using? Could you post a picture or link of the card? I can get one and try to solve this.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
any chance you can make an SD card and I can Venmo you to see if that's the issue? :)
Still sounds like a card compatibility problem. Maybe it's easier to try one of the following cards that I verified to work.
I’m using the Sandisk 32g ultaOn Mar 23, 2024, at 9:33 PM, nand2mario @.***> wrote: Still sounds like a card compatibility problem. Maybe it's easier to try one of the following cards that I verified to work. 8AAEDF06-64CC-450A-870B-F42975EF6723.jpeg (view on web)
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
SOLVED: Ordered another PMod SDCard Reader - original Card reader was defective
I literally swapped out the SD Reader with a new PMod SD Card reader - worked… Every card I tried with the old SDReader failed… Pretty sure it was the SDCard PMod board….On Mar 23, 2024, at 9:33 PM, nand2mario @.***> wrote: Still sounds like a card compatibility problem. Maybe it's easier to try one of the following cards that I verified to work. 8AAEDF06-64CC-450A-870B-F42975EF6723.jpeg (view on web)
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
I'm having this exact problem now with two different SD cards and two different PMOD SD card readers... I ordered two 25k kits and it seems both card readers may be defective. Just a heads up that you may get a few of these issues posted.
It would be interesting to look at your SDCARD PMOD board, perhaps it is somehow different from the one @nand2mario has
My two TF/SD Card PMOD boards are different; they're v2 instead of v1 in the pictures. Also of note, NES tang is also a no go for me. Both get to the menu, but can't load games. Both cards are formatted Fat32.
I'll get a new TF pmod to test.
Please test the attached bitstream to see if it helps. There's actually a change in pin location.
I'll test it when I receive the tang pmod.
Same error as before, unfortunately. I loaded that FS and the .bin from the latest release.
OK then. I'll wait for the pmod to arrive.
Please try again. I got the new pmod and this version works for me. You also need to write the firmware (to flash location 0x500000 as usual)
My pmod is labeled "PMOD TF CARD V2".
That's working! Amazing work! I'm assuming this will also affect NESTANG?
Thanks for your help. Also the new NESTang 0.9 should work with the v2 TF pmod.
Thanks. I didn’t get a chance to report back this morning but that update is working 100% now as well.
On Fri, Apr 5, 2024 at 7:50 AM nand2mario @.***> wrote:
Thanks for your help. Also the new NESTang 0.9 should work with the v2 TF pmod.
— Reply to this email directly, view it on GitHub https://github.com/nand2mario/snestang/issues/7#issuecomment-2039725440, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAF6R5KVCFNZUGLSAO4KEDTY32M3DAVCNFSM6AAAAABEOEI7BCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMZZG4ZDKNBUGA . You are receiving this because you commented.Message ID: @.***>
I've successfully loaded the snestang and firmware files. The menu on power up loads successfully, but selecting either options just gives me a screen of of 8 x 14 gradient dashes...