search

nayan-dev / nayan-devguide

Nayan Development Guide
https://nayan-dev.gitbooks.io/nayan-devguide/
0 stars 1 forks source link

Drone is not connecting to QGC or APM Planner #6

Open madhubabuv opened 7 years ago

madhubabuv commented 7 years ago

I am trying to connect the drone to QGC, but whenever I connect it the QGC not showing anything and after a while its showing a pop up with the message your vehicle is not responding. If this continues shutdown QGroundControl, restart the vehicle letting it boot completely, then start QGC. I tried restating the drone and closed down QGC and opened it, but still nothing is happening. Please help me in this regard

Thanks in advance.

bugobliterator commented 7 years ago

How are you connecting to the drone? Can you try connecting via USB? Also, are you following the response I gave here: https://github.com/nayan-dev/nayan-devguide/issues/4.

madhubabuv commented 7 years ago

Both the ways I tried using master usb port, and I powered up the drone with battery and connected using telemetry. Intially it was happening but I dont what went wrong its not getting connected.

bugobliterator commented 7 years ago

Can you check the SD Card. Format it and try again.

madhubabuv commented 7 years ago

I haven't inserted any SD card into it.

bugobliterator commented 7 years ago

Please try inserting an SD Card, that might be why its failing to boot.