epm

Commandline-based episode calendar/manager/scheduler/tracker (EPisode Manager)

Concepts

Series that have been added to epm can have one of these user states:

planned Just added, nothing seen.
started At least one episode seen, but not all.
completed All episodes seen but not archived (or explicitly restored).
archived All episodes seen and series is "ended" or "cancelled".
abandoned Archived, but not all episodes seen.

Transitions between these states are implicit and automatic. However, the archived (or abandoned) state can be manually controlled by the archive command, and undone with the restore command.

How a series moves between the states is hopefully quite obvious when using the tool.

A few notable transitions:

Command mark: If the last episode of a series was marked (and it's ended/cancelled), it moves to archived state.
Command unmark: If in archived state, it moves to started. If no episode marked at all afterwards, it moves to planned state.

Dependencies

Requires Python 3.9 (type hints are used, the lower-case variants).

requests
API key for The Movie Database
orjson (highly recommended, but optional)
zstd command-line tool. For compressing backups. (optional)

File locations

EPM's data and configuration is located in:

~/.config/episode_manager/

Mainly the database file series (and its backups). If this data is important to you, backing up this directory is highly recommended.

Run-time configuration is stored in the file config.

Arguably, the database file should be under ~/.local/share but I preferred to keep it all in one place.

TMDb API key

To use EPM, an API key is required. Apply for this here: https://developer.themoviedb.org. Since EPM is open-source and its source is literally open on the client (being written in Python), it's not possible to use a shared key.

Key is read from the environment:

TMDB_API_KEY

Or set it in the configuration:

epm config --api-key <your key>

Examples

Note, the exact appearance of these output examples might not be accurate. They're continuously being tweaked and improved.

Add a series you'd like to monitor:

⯈epm add twin peaks 
Found 10 series:
>  #1 Twin Peaks                             1990-1991  <
   #2 Twin Peaks                             2017-    
   #3 Twin                                   2019-    
   #4 Georgia Coffee: Twin Peaks             1993-    
   #5 Twin Turbos                            2018-2020
   #6 Twin Hawks                             1984-1985
   #7 Twin of Brothers                       2004-    
   #8 Lexi & Lottie: Trusty Twin Detectives  2016-2017
   #9 Twin Hearts                            2003-2004
  #10 Twin My Heart                          2019-    

<series selected in interactive menu>

Series added:
    1 Twin Peaks  1990-1991  tt0098936

Now the series is added.

All added series can be listed by using the list / ls command:

⯈epm ls
    1 Twin Peaks              1990-1991  tt0098936
       Total: Unseen: 30  1d 53min
       Next:  1:01 Pilot

Mark episodes that has been watched:

⯈epm mark 1
Marked 8 episodes as seen:  7h
   <list of episodes cut out>

⯈epm mark 1 s2e1-20
Marked 20 episodes as seen:  16h 17min
   <list of episodes cut out>

Then, show current status, using no arguments (or the unseen command):

⯈epm
    1 Twin Peaks  (1990-1991)   1 unseen
       Next:   2:22 Episode #2.22                      46min 1991-06-10

For a bit more "fancy" display of future episodes, use the calendar command, e.g.:

⯈epm cal 2
┏━━━━━━━━━━━━┥ August 2022  week 31
┃  1st Monday
┃  2nd Tuesday
┃  3rd Wednesday
┃  4th Thursday
┃      • The Orville   3:10 Future Unknown                                                          
┃      • For All Mankind   3:09 Coming Home                       46min
┃  5th Friday
┃  6th Saturday
┃  7th Sunday
┃      • Westworld   4:07 Metanoia                                52min
┠──────── week 32
┃  8th Monday
┃  9th Tuesday
┃ 10th Wednesday
┃ 11st Thursday
┃      • For All Mankind   3:10 Han                                                                 
┃ 12nd Friday
┃ 13rd Saturday
┃ 14th Sunday
┃      • Westworld   4:08 Que Será, Será                          59min

Sadly, these examples doesn't show that all output from epm is colorized for clarity and emphasis.

But here's a screenshot of the menu shown by the search command (very similar to add):

Basically the difference when using the add command is that the bottom text ... to exit then says RET to add ESC to exit.

Usage

epm / Episode Manager / (c)2022 André Jonsson
Version 0.9 (2022-08-01)
Usage: epm [<command>] [<args ...>]

Where <command> is:  (one-letter alias highlighted)
search      Search for a series.
add         Search for a series and (optionally) add it.
delete      Completely remove a series - permanently!
show        Show/list series
calendar    Show episode releases by date
unseen      Show unseen episodes of series
mark        Mark a series, season or specific episode as seen.
unMark      Unmark a series/season/episode - reverse of mark command.
Archive     Archving series - hides from normal list command.
Restore     Restore series - reverse of archive command.
refresh     Refresh episode data of all non-archived series.
config      Configure.
help        Shows this help page.
(none)  ▶  unseen

See: epm <command> --help for command-specific help.

Remarks:
# = Series listing number, e.g. as listed by the list command.
If an argument does not match a command, it will be used as argument to the default command.
Shortest unique prefix of a command is enough, e.g. "ar"  for "archive".
Install 'orjson' for faster load/save
Using zstd to compress database backups.

neonrust / epm

readme

epm