robot_payload_id

Identifying object inertial properties using a robot arm

Installation

This repo uses Poetry for dependency management. To setup this project, first install Poetry and, make sure to have Python3.10 installed on your system.

Then, configure poetry to setup a virtual environment that uses Python 3.10:

poetry env use python3.10

Next, install all the required dependencies to the virtual environment with the following command:

poetry install -vvv

(the -vvv flag adds verbose output).

For local Drake and manipulation installations, insert the following at the end of the .venv/bin/activate and .venv/bin/activate.nu files, modifying the paths and python version as required:

export PYTHONPATH=~/drake-build/install/lib/python3.10/site-packages:${PYTHONPATH}
export PYTHONPATH=~/manipulation:${PYTHONPATH}

Activate the environment:

poetry shell

Install git-lfs:

git-lfs install
git-lfs pull

Optimal Experiment Design

python scripts/design_optimal_excitation_trajectories.py  \
--optimizer "black_box" --cost_function "condition_number_and_e_optimality" \
--num_fourier_terms 5 --num_timesteps 1000 --use_one_link_arm --logging_path logs/traj

Hint: Run on multiple cores using --num_workers. When using multiple workers, using --log_level ERROR is needed for nice progress bars.

Note: It is recommended to design trajectories without considering reflected inertia and joint friction as this seems to lead to better results, even when identifying these parameters later on.

The --payload_only flag enables designing trajectories that only optimize the excitation of the payload parameters. These are the 10 inertial parameters of the last link.

Use a Fourier series trajectory as an initial guess for BSpline trajectory optimization

First, convert the optimized Fourier series trajectory into a BSpline trajectory:

python scripts/create_bspline_traj_from_fourier_series.py \
--traj_parameter_path logs/fourier_series_traj \
--save_dir logs/converted_trajs/bspline_traj \
--num_control_points_initial 30 --num_timesteps 1000

Second, use the converted trajectory as the initial guess:

python scripts/design_optimal_excitation_trajectories.py  \
--optimizer "black_box" --cost_function "condition_number_and_e_optimality" \
--num_timesteps 1000 --use_one_link_arm --logging_path logs/traj_bspline \
--traj_initial logs/converted_trajs/bspline_traj --use_bspline \
--num_control_points 30

Note: When using multiple workers for BSpline optimization, it is best to use CMAstd as the optimizer. The default optimizers seem to have bugs (see issue).

Visualize the designed trajectories

Make sure to use the same parameters for num_timesteps and time_horizon as were used for the optimal trajectory design.

python scripts/visualize_trajectory.py --traj_parameter_path logs/traj

Symbolic System ID

python scripts/symbolic_id.py --config-name one_link_arm_symbolic_id

Collect joint data

python scripts/collect_joint_data.py --scenario_path models/iiwa_scenario.yaml \
--traj_parameter_path logs/traj_bspline --save_data_path joint_data/iiwa

Add the --use_hardware flag to collect data on the real robot.

Process collected joint data

The collected joint data will likely be quite noisy.

It can help to average joint data from executing the same trajectory multiple times for improving the signal-to-noise ratio:

python scripts/average_joint_data.py joint_data_dir/ joint_data_averaged/

where joint_data_dir contains the joint data directories to average and joint_data_averaged is the directory to write the averaged joint data to.

Filtering is very important and it is recommended to tune the parameters carefully. Sweeping over different filter parameters can be helpful in this regard (see sweeping section below). Once filtering parameters have been determined, the data can be processed using the scripts/process_joint_data.py script or by passing the parameters as arguments to scripts/solve_inertial_param_sdp.py with the --process_joint_data flag.

After filtering, one might want to increase the data amount by combining the data from multiple excitation trajectories. This can be achieved using scripts/concatenate_joint_data.py.

SDP System ID

Generates data, constructs the data matrix and solves the SDP using posidefinite constraints on the pseudo inertias. This requires trajectories that have been designed using optimal excitation trajectory design as otherwise the numerics won't be good enough for the optimization to succeed.

Generating GT/ model-predicted data:

python scripts/solve_inertial_param_sdp.py --traj_parameter_path logs/traj \
--num_data_points 5000 --use_one_link_arm

Note that the model-predicted data corresponds to simulation data from collect_joint_data.py if the simulation timestep is set to zero (continuous-time simulation). Otherwise, the simulation data will be slightly noisy and closer to real robot data.

Using collected data (sim or real):

python scripts/solve_inertial_param_sdp.py --joint_data_path joint_data/iiwa_only \
--process_joint_data

Identifying the arm parameters and then freeze the parameters to identify the payload

First, identify the arm parameters without payload and save them to disk:

python scripts/solve_inertial_param_sdp.py --joint_data_path joint_data/iiwa_only \
--process_joint_data --output_param_path identified_params/params.npy

Second, freeze the identified parameters and identify the payload:

python scripts/solve_inertial_param_sdp.py \
--joint_data_path joint_data/iiwa_with_payload --process_joint_data \
--initial_param_path identified_params/params.npy --payload_only

The payload inertial parameters should correspond to the last link parameters identified by the second run minus the ones identified by the first run, i.e. the ones stored in identified_params/params.npy and passed to the second run. This parameter difference is printed by the script. Specify --payload_frame_name if you want to print them in a particular frame.

Reparameterized System ID

python scripts/identify_model.py --config-name iiwa_id

Sweeping Parameters

Eric ID

A sweep can be started with

wandb sweep config/sweep/iiwa_id_sweep.yaml

Individual agents for the sweep can be started using the printed wandb agent command.

A parallel sweep can be started with

bash scripts/parallel_sweep.sh config/sweep/iiwa_id_sweep.yaml ${NUM_PARALLEL}

where NUM_PARALLEL is a variable containing the number of parallel runs. By default, the maximum number of cores is used.

SDP data processing

The SDP results are very sensitive to the data processing. It can make sense to sweep over the data processing parameters to identify the best parameters for ones particular collected joint data.