Find the official documentation at ln-starterkit.com
Laravel and Next.js are two awesome frameworks to build modern Web-Apps. However, creating a Laravel based API and hooking it up to a Next.js frontend (or any other SPA Frontend) can be a quite tedious task that involves a lot of boilerplate (e.g., authentication). This Starter Kit hooks up a Laravel 8 API to a Next.js 10 frontend and includes all the basic features you need, so you can focus on the important and unique parts of your app. The Kit includes:
This Starter Kit leans towards the creation of Server Side Rendered (SSR) dynamic Web-Apps that handle and display dynamic data on the fly. Thus, this Starter Kit is for you if you want users to be able to register and have them be able to create user specific data, dashboards etc. In other words, this repo is not suited for Server Side Generation (SSG) and use cases where the consumed data is known at build time. In fact, Server Side Generation is not supported with this Starter Kit, as the getInitProps()
method is called in _app.tsx
.
To get things working, we must configure both the backend (Laravel) and the frontend (Next.js) correctly.
Navigate to the root directory. Copy and paste the .env.example
file and rename it to .env
cp .env.example .env
Now open the .env
file and fill in the values as needed. You might notice that the file is very similar to the default .env
file that ships with Laravel, but it’s not 100% the same. Some values are already set or changed (e.g., SESSION_DRIVER
) and some new ones are added. These configurations are necessary in order to hook the backend up to the frontend.
If you run your frontend on the default URL and Port (http://localhost:3000), you only need to replace the XXXXXXXXXXXXXXXX values. If you do not want to use the Next.js default URL and Port, you also need to adjust the SANCTUM_STATEFUL_DOMAINS
variable. Please only provide ONE value here. This means NO comma separated URLs.
If you take advantage of the containerization you should be good to go without changing anything except the email settings (see below) as everything is prepopulated correctly in the .env.example
file.
Notice: The repo uses some email functionality (registration, password reset). If you do not want these features, you must make some small tweaks. However, if you do want to take advantage of these features you MUST configure you email settings correctly. The app will break otherwise. Luckily, Laravel makes this extremely easy. More on that later on.
Once you're done you must install all the dependencies via composer:
composer install
If you worked with Laravel before you are probably familiar with artisan
. In order to prepopulate our database with all the necessary tables, you must execute the following command:
php artisan migrate --seed
The --seed
flag is optional but useful, since it creates some users and an admin for you (more on that below).
Once this is done, we can move to the frontend environment settings
We now take care of settings up our frontend. Therefore, navigate to the /client
directory, where our Next.js app lives.
First things first, we need to run npm install
to install all our dependencies.
Next, copy and paste the .env.local.example
file and rename it to .env.local
cd client; cp .env.local.example .env.local
Next.js can handle the .env.local
file out of the box and even allows us to access the environment variables in the browser. For more information visit their environment variables documentation. In a nutshell, it tells us that all variables that start with NEXT_PUBLIC_
will be accessible in the browser, which is great news for us!
NEXT_PUBLIC_API_HOST_URL
is the URL and host our Laravel API runs on. It defaults to http://localhost:8000
. Customize it to your requirements.
NEXT_PUBLIC_USER_HOME_ROUTE
is the home route for authenticated users, as the name indicates. It is the route a user will be redirected to after authentication, for example.
NEXT_PUBLIC_GOOGLE_TAG_MANAGER_ID
is your Google Tag Manager Container ID. If you leave it empty, Google Tag Manager won’t be integrated. However, if you build production ready application, it is highly advised to do so (see more below.)
The app is written with TypeScript. If you instead want good old Javascript you must change all file extensions from .tsx
to .jsx
or .js
. You then also have go through all the files and delete TypeScript specific syntax. My advise would be to leave it as it is and just use the .js
extension in the files you create of top of the Starter Kit, if you don't want to use TypeScript.
You might have already noticed that there is a file named /client/config/config.tsx
, which does not ship with Next.js by default. This file handles some default configurations for us.
We use axios
to make api requests and make some default configurations that our Laravel backend requires.
Also, we export a variable named protectedRoutes
. It is an array of routes/slugs that will not be accessible for unauthenticated users. The list also respects sub-routes, which means if we include „/dashboard“, „/dashboard/a“ or „/dashboard/a/b/c“ will be protected as well.
For example:
export const protectedRoutes = [
process.env.NEXT_PUBLIC_USER_HOME_ROUTE, // -> default
"/profile",
"/accout",
// ...
];
Customize this file according to your needs.
Congrats! You are now ready to launch the application. In order to get backend and frontend running at the same time, you need two terminal windows. In one, navigate to the root directory of your project and execute
php artisan serve
In the second terminal, navigate to /client
and execute
npm run dev
The two commands ship directly with Laravel and Next.js, respectively.
Now navigate to the frontend URL. You now see the homepage. You may register a new user under /user/register
or login at /user/login
. For more info see below.
Multiple parts of this application require proper settings for email. This includes the verification of a newly created users email address as well as the password reset functionality. Configuring email is no absolute must but highly recommended, as some tweaks to the code have to be done otherwise. Plus, these features are quite useful.
To configure your email settings, open the .env
file at the root of your project. Under the MAIL_
„section“ you can set any configurations you like. For development, I recommend MailTrap for a fake smtp testing server. You can set up an account for free and let MailTrap generate the .env variables for you that you can then paste into your .env
file. All mails you then send from your app will be caught by MailTrap and accessible for you via their dashboard.
A new user can be registered under /user/register
.
The following requirements must be pleased in order for the form to be submittable:
/client/services/UserValidator.tsx
.If the registration was successful, the user will be redirected to the user home route (defined under /client/.env.local
).
If the registration failed (for example because the email is already taken), a proper error message will be displayed. If configured, the user will also receive an email to verify her email address (see section „Email verification“).
If an already authenticated user tries to access /user/register
she will be redirected to the user home route.
A user can login under /user/login
. If the login was successful, the user will be redirected to the user home route (defined under client/.env.local
). If the login fails, a proper error message will be displayed.
If an already authenticated user tries to access /user/register
she will be redirected to the user home route.
Most Web-Apps these days require email verification for new users. As the Laravel Next.js Starter Kit leverages Laravel Sanctum on the backend, the API functionality for email verification comes right out of the box.
Important: If you want email verification in your project you MUST properly configure your email settings. Otherwise the application will break, as the Laravel API wants to send an email but does not find the right settings. Find out how to do that in the „Email testing“ section.
Once that’s done you can test things out on the frontend. Visit /user/register
and create an account. Afterwards, check your email inbox (e.g. MailTrap) for new mails. You will se a new mail with a link to a URL. Click it. By opening the page, a request with information from the URL will be sent to the API. If the verification was successful, you will be redirected to your User Home Route (set in /client/.env.local
). If the the verification fails an error message will be displayed and you will not be redirected.
If you don’t want email verification on your project, navigate to app/Models/User
and delete the implements MustVerifyEmail
part of the class definition statement. Then, delete the client/pages/user/email
directory and delete the verifyEmail
function in /client/store/auth/authActions.tsx
. For security reasons you might also want to deny access to the backend route from the frontend to the API. To accomplish this, open /config/cors.php
and delete "email/verify/*"
from the paths
array.
A user also has the possibility to reset his password. However, for this to work you must have your mail settings configured correctly. Find out how to do that in the „Email testing“ section.
To test things out visit /user/password/forgot
and enter the email address of the account. After submission, you will receive an email with a link. The link includes a token that is valid for 60 minutes. By submitting the form you create a new password.
If you do not want the possibility for a user to reset her password, first delete the /client/pages/password
directory. Afterwards, you can (but don’t have to) navigate to /client/store/auth/authActions.tsx
and delete the functions forgotPassword
and resetPassword
. For security reasons you might also want to deny access to the backend route from the frontend to the API. To accomplish this, open /config/cors.php
and delete "password/email"
and "password/reset"
from the paths
array.
By default, Laravel does not assign user roles. However, there are many use cases for different user roles, for example if an admin should have access to a dashboard with sensible that another user should not be able to see. Therefore, the Laravel Next.js Starter Kit populates the user
table in the database with an additional column named role
, which expects a string. You can find this configuration in the user migrations file under /database/migrations
. There, you'll also see that the default role of a new user is "user".
When running php artisan migrate:fresh --seed
, a couple of users will be created. The user with the ID 1 is named "Super-Admin" and has the role "admin". This is your super user who should have access to everything.
You can configure the behaviour to your needs under /database/seeders/UserSeeder
. The run()
method will be called in the DatabaseSeeder
when running a fresh migration with a seed.
You can define the email of the Super-Admin in the .env
at the root directory of your project by changing the ADMIN_EMAIL_ADDRESS
value. If you leave this value empty it will default to "admin@examplemail.com"
With traditional Single Page Applications like create-react-app, a common problem is „page flashing“ when trying to redirect a visitor. For example, an authenticated user should be immediately redirected to another page if she tries to access the login route. However, a traditional React app would for a short time still render the login view, as the authentication checks would only be conducted after the first component mount.
This comes to an end with Server Side Rendering (SSR) and this Starter Kit. Before rendering a view, the authentication status of a user is checked and a redirect conducted before the „old“ view is rendered, if necessary. Try it out yourself! Log in and then try to access /user/login
again. Watch the Url bar! Before anything is rendered to the page you will be redirected the the user home page.
In _app.tsx
the getInitialProps()
method is called (because getServerSideProps()
is currently not supported in _app.tsx
). This allows us to fetch the current user from the api before sending a page to the client. This is done by the authenticateUser
function from the AuthGuard
class, which also manages any redirects. As all this takes place before even sending data to the client, we can redirect immediately without any page flashing.
The Laravel Next.js Starter Kit comes with Tailwind CSS, which is a utility-first CSS framework that is highly customizable. For more information on the framework I recommend you take a look at the docs.
You can easily create your own theme by changing the values at /client/tailwind.config.js
. You can find out more about customisation options here.
The Tailwind components are injected into the /client/styles/global.css
file, which is required in the /client/pages/_app.tsx
file in order to be applied globally.
If you run npm run dev
Next.js will do some magic under the hood and get your CSS compiled without any further configuration.
There are a few custom components at /client/components
, mostly for demo purposes. These are all components that can be re-used in your pages. I will add more components in the future. Feel free to add, adjust or delete the components according to your needs.
If you want to build a production ready application you probably want to include tracking tools or other 3rd party scipts. You can of course do all that directly in the source code, but doing it via the [Google Tag Manager](https://tagmanager.google.com/ (GTM) makes this much more easy and flexible. Just create a free GTM account, integrate it to your website and inject all other needed scripts (e.g., Google Analytics) via GTM. This also comes in handy if you want to include a Cookie-Banner from a 3rd Party like Cookiebot and hook it up to your tracking tools in order to meet GDPR standards.
To set it up in your app, all you have to do is navigate to /client/.env.local
and paste you GTM id (typically starts with „GTM-…“) as the value for the NEXT_PUBLIC_GOOGLE_TAG_MANAGER_ID
. If you do not set this value, the GTM script will simply not be fired. No big deal.
If you have feedback, questions or anything else, feel free to leave me a mail under niclastimmdev@gmail.com or hit me up on Twitter under @niclas_timm. Looking forward to hearing from you :).
The Laravel Next.js Starter-Kit is open-sourced software licensed under the MIT license.