nikoschalikias eggbotcode issues

nikoschalikias / eggbotcode

Automatically exported from code.google.com/p/eggbotcode

0 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

IMPORTANT: Please use GitHub for reporting new issues.

#86 GoogleCodeExporter opened 8 years ago
0
Line breaks here (eggbot_hatch.inx) made the extension not load for me.

#85 GoogleCodeExporter closed 8 years ago
6
svg image is fliped

#84 GoogleCodeExporter closed 8 years ago
1
Allow manual moves with greater than 3200 steps (egg axis)

#83 GoogleCodeExporter closed 8 years ago
1
build-concorde-osx-0_2.sh script outdated

#82 GoogleCodeExporter opened 8 years ago
0
Manual moves above 1000 steps/s fail.

#81 GoogleCodeExporter closed 8 years ago
1
For EBB - add Abort command - to stop long moves

#80 GoogleCodeExporter closed 8 years ago
1
EBB firmware - for v2.2.4 and above, revert to v2.0.1 <duration> units

#79 GoogleCodeExporter closed 8 years ago
6
EBB firmware - document the "QB" command in EBB commands documentation

#78 GoogleCodeExporter closed 8 years ago
1
EBB v2.2.3 has min and max servo positions reversed

#77 GoogleCodeExporter closed 8 years ago
1
code issue

#76 GoogleCodeExporter closed 8 years ago
2
EBB slow motor rotation jerky.

#75 GoogleCodeExporter closed 8 years ago
3
Invalid comparison between string and number for viewbox determination in eggbot.py

#74 GoogleCodeExporter closed 8 years ago
1
Users report step speeds above 1000 steps/s result in erratic motor operation

#73 GoogleCodeExporter closed 8 years ago
2
Add raise/lower pen option to Layers tab of Eggbot Control

#72 GoogleCodeExporter closed 8 years ago
1
QC command errors out after 69 times in v2.0.1 of EBB firmware

#71 GoogleCodeExporter closed 8 years ago
2
Remove "empty" XML parameters in contributed extensions

#70 GoogleCodeExporter closed 8 years ago
1
EBB: Create separate set of commands that use 'correct' ms <duration> values, revert SM, SP, TP commands

#69 GoogleCodeExporter closed 8 years ago
1
EBB SE command PWM does not work in 2.2.1 and below

#68 GoogleCodeExporter closed 8 years ago
1
Update EBB S2 documentation with new format (v2.1.5 and above)

#67 GoogleCodeExporter closed 8 years ago
1
SP command happens at end of <duration> not at beginning

#66 GoogleCodeExporter closed 8 years ago
2
The SP command <duration> parameter does not default to 500ms

#65 GoogleCodeExporter closed 8 years ago
1
SP and TP commands do not have proper delay

#64 GoogleCodeExporter closed 8 years ago
1
<duration> values (for SM, SP and TP commands) do not allow over 2,621ms or the delay isn't right

#63 GoogleCodeExporter closed 8 years ago
1
Hershey Text causes Inkscape Trunk to crash

#62 GoogleCodeExporter closed 8 years ago
16
USB Driver Failed to Install on Windows 8 (64 bit)

#61 GoogleCodeExporter closed 8 years ago
1
USB Driver Failed to Install on Windows 8 (64 bit)

#60 GoogleCodeExporter closed 8 years ago
4
EBB SE command does not create proper output in 2.1.5

#59 GoogleCodeExporter closed 8 years ago
1
StippleGen 2.02 does not run in Processing 2.0 beta 6

#58 GoogleCodeExporter closed 8 years ago
1
Add simple limit switch inputs for stepper axes

#57 GoogleCodeExporter closed 8 years ago
2
EBB: Add simple 'delay' command

#56 GoogleCodeExporter closed 8 years ago
3
EBB SP command turns off other servo outputs

#55 GoogleCodeExporter closed 8 years ago
1
eggbot_hatch.py problem

#54 GoogleCodeExporter closed 8 years ago
15
same track order problem in hatch on text object in inkscape using eggbot_hatch.py

#53 GoogleCodeExporter closed 8 years ago
3
Support 1600 total step/rev and 6400 step/rev plotter resolution

#52 GoogleCodeExporter closed 8 years ago
4
Egg measurements are difficult to predict

#51 GoogleCodeExporter closed 8 years ago
3
Can't pause or cancel the pattern

#50 GoogleCodeExporter closed 8 years ago
1
Fix permissions on Mac Installer

#49 GoogleCodeExporter closed 8 years ago
4
hatch does not work on Ubuntu

#48 GoogleCodeExporter closed 8 years ago
5
Remove copper from EBB mounting holes

#47 GoogleCodeExporter closed 8 years ago
1
EBB PI command should only return 0 or 1

#46 GoogleCodeExporter closed 8 years ago
2
EBB firmware: Error-trap too-fast speed reqests

#45 GoogleCodeExporter closed 8 years ago
3
EBB Firmware: Add long ints (4 bytes) for step counts

#44 GoogleCodeExporter closed 8 years ago
3
Add velocity control mode to EBB firmware

#43 GoogleCodeExporter closed 8 years ago
2
Ignore unsupported SVG elements unrelated to rendering; provide more informative warnings for other unsupported elements

#42 GoogleCodeExporter closed 8 years ago
2
SVG <title> tag is not recognized; triggers "unable to draw object" warning

#41 GoogleCodeExporter closed 8 years ago
1
Maze plotting requires high drawing precision for decent results

#40 GoogleCodeExporter closed 8 years ago
1
Multi-layer plotting is very slow

#39 GoogleCodeExporter closed 8 years ago
4
Firmware update program mphidflash does not work on ubuntu maverick

#38 GoogleCodeExporter closed 8 years ago
6
Read/act on limit switches

#37 GoogleCodeExporter closed 8 years ago
6