Labelprinterkit is a Python3 library for creating and printing labels with Brother P-Touch devices. It was developed for the Networking department of KIT (Karlsruhe Institute of Technology).
Labelprinterkit's simple layout engine can be used to create simple labels:
from labelprinterkit.backends.usb import PyUSBBackend
from labelprinterkit.printers import P700
from labelprinterkit.label import Label, Text, Box, Padding
from labelprinterkit.job import Job
from labelprinterkit.constants import Media
from labelprinterkit.page import Page
from PIL import Image
# Create text for the label
text1 = Text(45, "First line", 'comic.ttf', padding=Padding(0, 0, 1, 0))
text2 = Text(25, "Some text", 'comic.ttf')
text3 = Text(25, "Other text", 'comic.ttf')
# Insert Text into boxes
box1 = Box(45, text1)
box2 = Box(25, text2, text3)
# Create label with rows from above
label = Label(box1, box2)
# Create job with configuration and add label as page
job = Job(Media.W12)
job.add_page(label)
# Create a page from a Pillow image and add it to the job
image = Image.new("1", (70, 200), "white")
page = Page.from_image(image)
job.add_page(page)
# scan for a USB printer using the PyUSBBackend
backend = PyUSBBackend()
printer = P700(backend)
# Print job
printer.print(job)To use a Bluetooth connection:
printer = GenericPrinter(BTSerialBackend(dev_path='/dev/ttyS8'))The following printers are currently supported:
The following printers have been tested to mostly work, although not officially supported (their protocol is similar, although not identical):
The following backends are currently supported:
The official source of this repository is at https://git.scc.kit.edu/scc-net/labelprinterkit. Pull requests and issues are also accepted on github at https://github.com/ogelpre/labelprinterkit.