Tuya thermostat: wrong operation mode

[AdrianTindeche]

1st of all, congrats for your excellent work, with your Tuya custom component I finally managed to have my Tuya thermostat appearing almost correctly in HA.

I managed to set all parameters, so all temperature values are shown correctly (in °C in my case) and desired temperature can be set in halves of °C and I can see the changes in the Tuya app also (or the other way around), not instantly, but it's OK, though there are few minor issues:

• the thermostat mode is shown as "auto", whereas my thermostat modes are "manual/ECO/auto"
• I assume the power ON button should be green when ON and grey when OFF, though I can only see it as grey

I understand that the code is more general and it includes HVAC devices, but it's not clear to me from the code if you are reading the device mode somehow, or you simply assume it could be something like "ON/OFF/AUTO/Heat/Cool/Ventilation".

Cheers

[peetereczek]

I have the same with mine working on RF433, what thermostate do you have?

[AdrianTindeche]

This one. It's a Tuya smart one, though I'm not that happy with it mainly due to its hysteresis value (0.5 °C, that cannot be changed to any lower value). I bought it to replace an old Honeywell CM67, as part of my smart home heating solution.