v1.40 12.10 freeze/crash.

[domrnet]

Now using 12.10 the sim crashes or freezes up when using autho that has sea/ocean in the tile when using autho made from version 1.40. Tiles from v1.30 with sea are ok as far as I tested.

I get no log because of the freeze so cannot attach it.

[shizumaat]

FWIW I've tested a number of tiles generated with v1.4 and bathymetry in XP 12.10 Beta 1 and they all worked fine. Some that had really bad flickering in the water along the coast now look much better, although there seems to be a bit harsher edge to the water at the beach.

[domrnet]

Great that's good to know. I wonder if it's because I only updated the tiles previously when running V1.40 on them instead of re making them. I will re make some from scratch and see if that is the issue.

[emiliovfx]

I can confirm that I've made so far a bunch of tiles with bathymetry, not regenerating them but just using the previous tile config without any problems. All the tiles are working in XP12.0.9 and 12.1 beta without an issue.

What are your water mask settings?

[d41k4n]

Now using 12.10 the sim crashes or freezes up when using autho that has sea/ocean in the tile when using autho made from version 1.40. Tiles from v1.30 with sea are ok as far as I tested.

What do you mean by "autho"? Is this a typo or are you referring to autoortho by any chance?

[domrnet]

Now using 12.10 the sim crashes or freezes up when using autho that has sea/ocean in the tile when using autho made from version 1.40. Tiles from v1.30 with sea are ok as far as I tested.

What do you mean by "autho"? Is this a typo or are you referring to autoortho by any chance?

It's a typo

[domrnet]

I can confirm that I've made so far a bunch of tiles with bathymetry, not regenerating them but just using the previous tile config without any problems. All the tiles are working in XP12.0.9 and 12.1 beta without an issue.

What are your water mask settings?

Current settings are verbosity=1 cleaning_level=1 overpass_server_choice=random skip_downloads=False skip_converts=False max_convert_slots=4 check_tms_response=True http_timeout=10.0 max_connect_retries=5 max_baddata_retries=5 ovl_exclude_pol=[0] ovl_exclude_net=[] custom_scenery_dir= custom_overlay_src=/mnt/FG/X-Plane 12/Global Scenery/X-Plane 12 Global Scenery apt_smoothing_pix=9 road_level=1 road_banking_limit=0.5 lane_width=5.0 max_levelled_segs=100000 water_simplification=0.0 min_area=0.001 max_area=200.0 clean_bad_geometries=True mesh_zl=19 curvature_tol=2.0 apt_curv_tol=0.5 apt_curv_ext=0.5 coast_curv_tol=1.0 coast_curv_ext=0.5 limit_tris=0 hmin=0.0 min_angle=10.0 sea_smoothing_mode=zero water_smoothing=10 iterate=0 mask_zl=14 masks_width=100 masking_mode=sand use_masks_for_inland=False imprint_masks_to_dds=True distance_masks_too=False masks_use_DEM_too=False masks_custom_extent= cover_airports_with_highres=ICAO cover_extent=0.5 cover_zl=19 water_tech=XP12 ratio_bathy=1.0 ratio_water=0.25 overlay_lod=25000.0 sea_texture_blur=0.0 normal_map_strength=1.0 terrain_casts_shadows=False use_decal_on_terrain=False

Just re making all the tiles that I had previously updated so lets see from that unless you see something really amiss here. Was all working fine with XP12.9

[emiliovfx]

This is what is giving me the best results so far.

Masks for inland. True Imprint masks to dds. False

[domrnet]

if this current run doesn't work out I will give it a try. thanks

[domrnet]

Whole of UK redone.. Same result.

[domrnet]

Ok. When I re-ran I didn't completely delete everything. I tested one tile now by deleting everything for it as though it never existed. Built it new and no issue. So mass delete done and My PC will be busy as I sleep tonight. I will feedback results.

[domrnet]

Ok update to close there must have been something wrong with the tiles. After a complete wipe of my UK tiles and a new build there are zero issues. My frames are actually slightly up so something was a well hidden issue till now.