This repository contains tools for setting up a Helios virtual or physical host for development purposes. It provides support for at least the following environments:
These instructions assume you are using an Ubuntu 20.04.01 LTS system and that
you have the libvirt suite installed. The easiest way to get these tools is to
install the virt-manager
package, which also gets you a limited GUI interface
for managing virtual machines; e.g.,
host ~ $ sudo apt install virt-manager
So that you can interact with virtual machines directly, make sure your regular
user account is a member of the libvirt
group.
NOTE: New group memberships generally don't take effect until you log out and
log in again; to avoid needing to do that you can temporarily switch your
primary group to libvirt with newgrp
. You only need to do this until the
next time you log out and log in.
host ~ $ sudo usermod -a -G libvirt $(whoami)
host ~ $ newgrp libvirt
NOTE: Helios is only built for x86 CPUs, so these instructions will only work on a Macintosh with an Intel CPU. Newer systems with ARM CPUs are not suitable and will not work.
Install VMware Fusion. These instructions have been tested with VMware Fusion
12.1. It should be installed in the usual place; i.e.,
/Applications/VMware Fusion.app
.
Run the setup script that will download the vmware-sercons
tool and build it
from source:
host ~ $ ./macos/setup.sh
You will need to have some package installed that provides make
and gcc
,
such as XCode or the SDK command-line utilities.
To create the virtual machine, you must first obtain the seed image:
host ~/helios-engvm $ ./download.sh
checking hash on existing gz file /home/user/helios-engvm/tmp/helios-qemu-ttya-full.raw.gz...
extracting /home/user/helios-engvm/tmp/helios-qemu-ttya-full.raw.gz
moving /home/user/helios-engvm/tmp/helios-qemu-ttya-full.raw.gz.extracted -> /home/user/helios-engvm/input/helios-qemu-ttya-full.raw
checking hash on existing file /home/user/helios-engvm/input/helios-qemu-ttya-full.raw...
seed image downloaded ok
If you already have an instance of Helios running, you can alternatively choose to create this image manually.
The default virtual machine settings (e.g., CPU count, disk size, memory size)
are stored in config/defaults.sh
:
host ~/helios-engvm $ cat config/defaults.sh
VM=helios
POOL=default
INPUT_IMAGE=helios-qemu-ttya-full.raw
SIZE=30G
VCPU=2
MEM=$(( 2 * 1024 * 1024 ))
You can override them by making a new file under config
; e.g.,
host ~/helios-engvm $ echo 'VCPU=8' >config/big.sh
host ~/helios-engvm $ echo 'MEM=$(( 8 * 1024 * 1024 ))' >>config/big.sh
default
network is activatedYou can check the state of existing networks as such:
$ sudo virsh net-list --all
The output should include the default
network as "active":
Name State Autostart Persistent
--------------------------------------------
default active no yes
If it is not active, activate it:
$ sudo virsh net-start default
You can now create a virtual machine. If you chose to use a non-default config,
provide its name as the argument, which will override the default. E.g., for a
config called big.sh
:
host ~/helios-engvm $ ./create.sh big
If everything goes well, you will be attached to the serial console of the
virtual machine which will boot into the Helios development image. An account
will be created with the same username and uid as your account on the host
system, and your authorized_keys
file will be copied into the guest.
Once boot and setup are complete, you should see a prompt that tells you
the IP address the guest was given; e.g.,
You should be able to SSH to your VM:
ssh user@192.168.122.235
If you need to get into the root account on the console to debug something, the development image ships with an empty root password to make it easy to do so.
You can halt the VM and destroy the created resources (disks, etc) with the
matching destroy.sh
:
host ~/helios-engvm $ ./destroy.sh big
If you need to get back on the console later, you can use the console.sh
script; e.g.,
host ~/helios-engvm $ ./console.sh big
Once you have a virtual machine running Helios and you are able to use SSH to access it, you can build and test Helios and illumos software inside, like you would with any other machine. There are detailed instructions in the Helios repository that cover building OS packages and updating the build machine (in this case, your virtual machine!) to use those packages.
NOTE: As mentioned in the Helios documentation, when installing and rebooting it is a good idea to be on the console of the virtual machine so you can see any boot messages and interact with the boot loader. If you are not still attached from when you created the virtual machine, you can re-attach with:
host$ virsh console --force helios
Connected to domain helios
Escape character is ^]
helios console login: root
Password:
Dec 4 22:58:11 helios login: ROOT LOGIN /dev/console
The illumos Project master-0-g7b4214534c December 2020
root@helios:~# reboot
Dec 4 22:58:49 helios reboot: initiated by root on /dev/console
updating /platform/i86pc/amd64/boot_archive (CPIO)
syncing file systems... done
rebooting...
If you want to install the OS on a physical machine, there is a crude installation image available that can be booted as either an ISO or a USB disk.
First, grab the images from the download area at: https://pkg.oxide.computer/install/latest/
This directory contains three ISO images, each of which is configured to use a
different device for the operating system console; ttya
(aka COM1), ttyb
(aka COM2), or vga
(the framebuffer and keyboard). If you have a system with
an IPMI Serial-over-LAN (SOL) facility, you probably want ttyb
. If you have
a desktop with a keyboard and monitor, you probably want vga
. Prefer serial
if you can!
If you have a physical USB mass storage device (e.g., a flash drive) you can
use dd
to write the image to the disk. It should replace the partition
table, so use the whole-disk device for your OS (e.g., something like
/dev/sda
on Linux, or /dev/dsk/c0t0d0p0
on illumos).
If you want to try booting the ISO via IPMI remote media redirection that may also work.
Boot from your media. The install media will log in automatically as root and display an informational banner:
-- Welcome to Oxide Helios! -------------------------------------------------
This bootable ISO allows you to install Helios on a traditional
install-to-disk system; e.g., a desktop PC or a BIOS/EFI-boot
server.
To install, use "diskinfo" to locate the disk you wish to install
to, and then use "install-helios" to format it and install the
operating system.
More information is available in the "Installing on a physical
machine using the ISO" section of the README at:
https://github.com/oxidecomputer/helios-engvm
-----------------------------------------------------------------------------
From this shell:
diskinfo
to find your disk; you may need to run it a few times if the
disk devices have not yet finished attaching and you don't see the disks you
expect. For example:
# diskinfo
TYPE DISK VID PID SIZE RMV SSD
NVME c1t0025385C9150D623d0 Samsung SSD 970 EVO 1TB 931.51 GiB no yes
NVME c2t0014EE83021EAE80d0 NVMe WUS4BB019D4M9E4 1788.50 GiB no yes
# install-helios myhostname c1t0025385C9150D623d0
...
ok to reboot now
root
and no password.Find your NIC:
# dladm show-ether
LINK PTYPE STATE AUTO SPEED-DUPLEX PAUSE
bge0 current up yes 1G-f none
bge1 current unknown no 0G none
# dladm show-phys -m
LINK SLOT ADDRESS INUSE CLIENT
bge0 primary a0:42:3f:42:91:50 yes bge0
bge1 primary a0:42:3f:42:91:51 no --
Let's say we pick bge0
. Set up IP:
# ipadm create-if bge0
# ipadm create-addr -T dhcp bge0/dhcp
# svcadm restart network/service
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
bge0/dhcp dhcp ok 172.20.3.63/24
lo0/v6 static ok ::1/128
Clone helios-engvm.git
on your workstation, and try generating a setup
script:
$ ./aws/gen_userdata.sh
#!/bin/bash
set -o errexit
set -o pipefail
set -o xtrace
echo 'Just a moment...' >/dev/msglog
/sbin/zfs create 'rpool/home/jclulow'
/usr/sbin/useradd -u '1000' -g staff -c 'Joshua M. Clulow' -d '/home/jclulow' \
-P 'Primary Administrator' -s /bin/bash 'jclulow'
/bin/passwd -N 'jclulow'
/bin/mkdir '/home/jclulow/.ssh'
/bin/uudecode <<'EOSSH'
begin-base64 600 /home/jclulow/.ssh/authorized_keys
ZWNkc2Etc2hhMi1uaXN0cDM4NCBBQUFBRTJWalpITmhMWE5vWVRJdGJtbHpk
SEF6T0RRQUFBQUlibWx6ZEhBek9EUUFBQUJoQlBKNXU0d1pqdmUrUDFTQTEx
Q1U1WDVIcytGY29RQnFLZFpjMVA3MjhLS1dtbTBTK3YwVHMyR0Z1SldVcnV6
NnpDVm1JM3JWc2J4TGZ4cXFLbHZ6d0xrWXRhOU41aFZBakZhOTltQzRkYk1i
UlFWVFJrdW42ZXZPK3RvaTlCcXU2dz09IGpjbHVsb3ctc3lzbWdyLTAyCg==
====
EOSSH
/bin/chown -R 'jclulow:staff' '/home/jclulow'
/bin/chmod 0700 '/home/jclulow'
/bin/sed -i \
-e '/^PATH=/s#$#:/opt/ooce/bin:/opt/ooce/sbin#' \
/etc/default/login
/bin/ntpdig -S 0.pool.ntp.org || true
echo 'ok go' >/dev/msglog
If this works, you can go to the Helios machine and listen with netcat for a script:
$ nc -l 1701 </dev/null | bash -x
Then, on your workstation:
$ ./aws/gen_userdata.sh | nc 172.20.3.63 1701
This should send the script to the Helios machine and create your account. Assuming it completed successfully you should be able to SSH to the machine now with your key:
$ ssh 172.20.3.63
The illumos Project helios-1.0.20642 August 2021
jclulow@myhostname ~ $
If you're using DHCP, your IP address may change from time to time. On your Helios machine you can enable Multicast DNS:
# svcadm enable network/dns/multicast
You should then be able to find the machine from your workstation as
myhostname.local
, rather than needing to use the IP address.
You should probably create a swap device if you don't already have one. Determining the size is not an exact science, but somewhere between 1GB and half the size of RAM is probably a good guess.
# zfs create -V 8G rpool/swap
# echo '/dev/zvol/dsk/rpool/swap - - swap - no -' >> /etc/vfstab
# /sbin/swapadd
Also useful is to configure a dump device for capturing system crash dumps:
# zfs create -V 8G rpool/dump
# dumpadm -d /dev/zvol/dsk/rpool/dump
The dump device needs to be large enough to hold a compressed copy of all of
the allocated kernel memory in a system. The most correct answer for sizing is
"the same size as physical RAM", but you can often get away with less. You can
estimate how large a dump would be if the system panicked right now with
dumpadm -e
, but note that this estimate does not reflect how large a dump
might be after you begin seriously using the system.
Neither the ISO nor the virtual machine images always include the latest packages. You can update your system via:
# pkg update -v
Pay careful attention to the instructions printed at the end of the update.
You may be told that a boot environment was created and that you need to
reboot to activate it. You should do that with the reboot
command before
moving on.
You can do this again whenever you need to update your system.
Unlike the create.sh
script for producing a virtual machine, the ISO images
will install a minimal base system that does not include developer tools. If
you are setting up a machine for developing (or just building) Helios and other
software, install at least these extra packages:
# pkg install -v \
/developer/build-essential \
/developer/illumos-tools
This will make available a variety of tools like Git, GNU Make, and GCC.
Official Rust and Cargo binaries are available from the Rust project via the
same rustup tool that works on other systems. Use the
official instructions, but substitute bash
anywhere you see sh
; e.g., at
the time of writing, the (modified) official install instructions are:
$ curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | bash
Copyright 2024 Oxide Computer Company
Unless otherwise noted, all components are licenced under the Mozilla Public License Version 2.0.