ConnectLife integration for Home Assistant
You can install using HACS or download.
If you have HACS installed, add this repository (oyvindwe/connectlife-ha
) as a custom repository of type "Integration".
See https://hacs.xyz/docs/faq/custom_repositories/
Download the connectlife
directory and place in your <config>/custom_components/
.
After installing, you need to restart Home Assistant.
Finally, add "ConnectLife" as an integration in the UI, and provide the username and password for your ConnectLife account.
You device and all their status values should show up.
Any unknown device will show up as sensors with names based on their properties. As there are a lot of exposed sensors, all unknown sensors are hidden by default. Access the device or entity list to view sensors and change visibility.
Device name | Device type | Device type code | Device feature code |
---|---|---|---|
AP10TW1RLR-N | Air conditioner | 006 | 200 |
Air conditioner | 006 | 201 | |
Dehumidifier | 007 | 400 | |
Dehumidifier | 007 | 406 | |
Air conditioner | 009 | 100 | |
Air conditioner | 009 | 104 | |
Air conditioner | 009 | 106 | |
Air conditioner | 009 | 109 | |
Air conditioner | 009 | 117 | |
Air conditioner | 009 | 128 | |
Air conditioner | 009 | 129 | |
W-DW50/60-22 | Dishwasher | 015 | 000 |
Heat pump | 016 | 502 | |
Induction hob | 020 | 63c45b513e1a4bf7 | |
Oven | 023 | 295608422d362be1 | |
Refrigerator | 026 | 1b0610z0049j | |
DPNA83W | Tumble dryer | 032 | 000 |
Please, please, please contribute PRs with mapping files for your devices!
ConnectLife properties can be mapped to any of these entity types:
Some devices will beep on every configuration change. To disable this, go to the ConnectLife integration and click "Configure" → "Configure a device" and select the device you want to disable beeping for.
Entity service connectlife.set_value
can be used to set values. Use with caution, as there is no validation
if property is writeable or that the value is legal to set.
It is possible to guard against set_value
by setting read_only: true
in the data dictionary on the sensor, e.g.
- property: f_status
sensor:
read_only: true
Please ignore the following warning in the log:
Entity None (<class 'custom_components.connectlife.climate.ConnectLifeClimate'>) implements HVACMode(s): auto, off and therefore implicitly supports the turn_on/turn_off methods without setting the proper ClimateEntityFeature. Please report it to the author of the 'connectlife' custom integration
Missing features:
target_temperature_high
/target_temperature_low
Missing features:
target_temperature_high
/target_temperature_low
You have to create a ConnectLife account with username/password. SSO using other identity providers is not supported. Appliances can be shared with multiple accounts, so this should not be a blocker. See https://github.com/oyvindwe/connectlife-ha/issues/99 for more info.
Note that users at least in Russia and China can't log in using this integration. See discussion in https://github.com/bilan/connectlife-api-connector/issues/25