PlatformIO framework for the LPC176x MCU series
This framework is part of the custom PlatformIO platform
that MarlinFirmware uses to build for the LPC176x MCU.
The framework aims to eventually be Arduino API compatible, though Arduino libraries will probably not work,
this is a work in progress with most basic functionality available.
Hardware Serial Ports
If your board layout does not use the default pins for UART RX/TX override them with the definitions below.
| Serial |
TX |
RX |
FUNCNUM |
| Default |
P0_02 |
P0_03 |
1 |
| Serial1 |
TX |
RX |
FUNCNUM |
| Default |
P0_15 |
P0_16 |
1 |
LPC_PINCFG_UART1_P2_00 |
P2_00 |
P2_01 |
2 |
| Serial2 |
TX |
RX |
FUNCNUM |
| Default |
P0_10 |
P0_11 |
1 |
LPC_PINCFG_UART2_P2_08 |
P2_08 |
P2_09 |
2 |
| Serial3 |
TX |
RX |
FUNCNUM |
| Default |
P0_00 |
P0_01 |
2 |
LPC_PINCFG_UART3_P0_25 |
P0_25 |
P0_26 |
3 |
LPC_PINCFG_UART3_P4_28 |
P4_28 |
P4_29 |
3 |
AnalogRead
There are 8 ADC channels available
| Pin |
Channel Number |
| P0_02 |
7 |
| P0_03 |
6 |
| P0_23 |
0 |
| P0_24 |
1 |
| P0_25 |
2 |
| P0_26 |
3 |
| P1_30 |
4 |
| P1_31 |
5 |
AnalogWrite
Although all pins can be used for PWM (software mode) there are 6 Hardware PWM channels, if a hardware channel is
available for a pin but it is in use by another pin it will fall back into software mode, All channels
software and hardware share a period (default 20ms).
| Hardware channel |
Attached pins |
| 1 |
P1_18, P2_00 |
| 2 |
P1_20, P2_01, P3_25 |
| 3 |
P1_21, P2_02, P3_26 |
| 4 |
P1_23, P2_03 |
| 5 |
P1_24, P2_04 |
| 6 |
P1_26, P2_05 |