paiprashanth ardupilot-mega issues

paiprashanth / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

DO_CHANGE_SPEED in Mission Planner, speed and throttle switched

#531 GoogleCodeExporter closed 8 years ago
4
APM Mission Planner issues when run on Linux using Mono

#530 GoogleCodeExporter opened 8 years ago
19
attempt to use poisoned "SIG_USART0_RECV"

#529 GoogleCodeExporter opened 8 years ago
0
Mission Planner 1.1.43 not updating ch6 correctly

#528 GoogleCodeExporter closed 8 years ago
5
Configure dronecell (or ant GSM900 module) on boot

#527 GoogleCodeExporter opened 8 years ago
7
difficult to connect to UDP - unless connected to USB first (a strange bug)

#526 GoogleCodeExporter closed 8 years ago
23
Additional CH6 Tuning options please

#525 GoogleCodeExporter closed 8 years ago
2
Can't download logs from MP

#524 GoogleCodeExporter closed 8 years ago
7
MP: add BATTERY_EVENT to Configuration Parameters

#523 GoogleCodeExporter opened 8 years ago
0
MP v1.1.xx + does not connect via APC220 modules

#522 GoogleCodeExporter opened 8 years ago
14
Enhancement request

#521 GoogleCodeExporter closed 8 years ago
3
RTL does not ensure it's actually getting closer to home.

#520 GoogleCodeExporter opened 8 years ago
3
MP - connect to APM - Click cancel does nothing

#519 GoogleCodeExporter closed 8 years ago
9
MP1.39 is not getting hooked to the AC2.4 at 19200 baud of Telemetry

#518 GoogleCodeExporter closed 8 years ago
2
MP1.39 is reading the loiter mode of the AC2.4 as "Stabilize"

#517 GoogleCodeExporter closed 8 years ago
2
Arduplane crash

#516 GoogleCodeExporter closed 8 years ago
2
Spanish translation in version 1.1.37

#515 GoogleCodeExporter closed 8 years ago
2
Mission planner conditional triggers based on maH (consumed) or cell voltage threshold.

#514 GoogleCodeExporter opened 8 years ago
0
ArduPlane.exe crash

#513 GoogleCodeExporter closed 8 years ago
2
DO_SET_RELAY parameters in Mission Planner not assigned correctly. DO_SET_SERVO does not work

#512 GoogleCodeExporter opened 8 years ago
4
Guided mode WP display symbol

#511 GoogleCodeExporter closed 8 years ago
4
Code for initializing ground pressure seems wrong

#510 GoogleCodeExporter closed 8 years ago
4
1.1.35 - Battery capacity not saved.

#509 GoogleCodeExporter closed 8 years ago
4
ArduPilot 2.28 - twitching aileron

#508 GoogleCodeExporter closed 8 years ago
15
MP 1.1.34 - fails to invert servo channel, or visualize inverted channel.

#507 GoogleCodeExporter closed 8 years ago
2
MP 1.1.34 - modes not working (OK in setup page, but not shown in flight page)

#506 GoogleCodeExporter opened 8 years ago
2
USB Device Not Recognized

#505 GoogleCodeExporter opened 8 years ago
0
Not all data is logged properly, empty logs generated, can't switch off CURRENT logging from command line

#504 GoogleCodeExporter closed 8 years ago
6
MP v1.1.3x, Ch 6 Options drop down box - text truncated

#503 GoogleCodeExporter closed 8 years ago
2
ArduCopterMega doesn't set the Drone Type on MAVBeats

#502 GoogleCodeExporter closed 8 years ago
1
MP 1.1.29 - HIL mode doesn´t read GPS data from sim

#501 GoogleCodeExporter opened 8 years ago
3
Example sketch for AP_PeriodicProcess

#500 GoogleCodeExporter opened 8 years ago
2
Mission Planner not using default alt

#499 GoogleCodeExporter closed 8 years ago
3
No yaw servo output on AC 2.2b4

#498 GoogleCodeExporter closed 8 years ago
3
MP crashes when USB is disconnected

#497 GoogleCodeExporter closed 8 years ago
5
Arduino 0.22 - relaxpatch is no longer available but is required to compile arduplane.

#496 GoogleCodeExporter closed 8 years ago
2
Battery Info should not appear when monitoring is not selected.

#495 GoogleCodeExporter opened 8 years ago
2
no log record it there is not a big stack of data , or the writing rate is low

#494 GoogleCodeExporter opened 8 years ago
1
Mission Planner - CLI entered automatically, wording states "Press ENTER 3 times for CLI"

#493 GoogleCodeExporter closed 8 years ago
5
Error when hit "AUTO" in MegaPlanner after loading mission from file

#492 GoogleCodeExporter opened 8 years ago
3
In Mission planner switch to "Position" mode the MP says "Stabilize"...

#491 GoogleCodeExporter closed 8 years ago
7
No numerical value for Yaw shown in Radio Input of APM setup

#490 GoogleCodeExporter closed 8 years ago
1
URGENT: 'VERIFY HEIGHT' CONVERTS WAYPOINT 'ALT' TO ABSOLUTE HEIGHT

#489 GoogleCodeExporter closed 8 years ago
2
I couldn't see arducopter 3d model in flightgear

#488 GoogleCodeExporter opened 8 years ago
2
Alternate Turn Behavior at Waypoints

#487 GoogleCodeExporter opened 8 years ago
7
Throttle channel in Mission Planner loses resultion

#486 GoogleCodeExporter closed 8 years ago
5
cygstcd++.6.dll library not found after software update to last version (mission planner 1.1.21)

#485 GoogleCodeExporter closed 8 years ago
5
No Altitude data on KMZ log files

#484 GoogleCodeExporter closed 8 years ago
2
Save/Load only the radio calibration in MegaPlanner

#483 GoogleCodeExporter closed 8 years ago
2
Magnetometer HMC5883L Bug

#482 GoogleCodeExporter closed 8 years ago
5

Previous Next