saj_mqtt

Home Assistant integration for SAJ H1 inverters This custom integration provides MQTT integration for SAJ H1 inverters and some other compatibile models. \ DISCLAIMER: this is a heavy work in progress, I won't be responsible for any kind of loss during it usage, the integration is provided AS-IS.

Configure Home Assistant MQTT broker

This integration uses the MQTT services already configured in Home Assistant to communicate with the inverter and retrieve the data, for this reason you need to first setup a broker and configure Home Assistant to talk to using the standard MQTT integration. Of course, if you already have MQTT configured, you don't need to do this again.

Install the integration

Copy content of custom_components into your Home Assistant custom components directory (for example: /home/homeassistant/.homeassistant/custom_components/saj_mqtt).

Edit Home Assistant configuration.yaml (usually found in /home/homeassistant/.homeassistant/configuration.yaml) and add the following section:

saj_mqtt:
    serial_number: {inverter_serial_number}
    scan_interval: {scan_interval}
    scan_interval_inverter_info: {scan_interval_inverter_info}
    scan_interval_battery_info: {scan_interval_battery_info}
    scan_interval_battery_controller: {scan_interval_battery_controller}
    scan_interval_config: {scan_interval_config}
    debug_mqtt: {debug_mqtt}

The {inverter_serial_number} is the inverter serial number (required, f.e. H1S2xxxxxxxxxxxxxx).

The {scan_interval} is the scan interval for the realtime data (optional, defaults to 60). This is realtime data. This is always fetched. Do not set lower than 10 seconds!

The {scan_interval_inverter_info} is the scan interval for the inverter info data (optional, defaults to None). This is static data. This is only needed if you want to read the inverter info. If required, set to startup or a slow scan interval like days: 1.

The {scan_interval_battery_info} is the scan interval for the battery info data (optional, defaults to None). This is static data. This is only needed if you want to read the battery info. If required, set to startup or a slow scan interval like days: 1.

The {scan_interval_battery_controller} is the scan interval for the battery controller data (optional, defaults to None). This is realtime data. This is only needed if you have multiple batteries and want to know the details of each battery individually. Do not set lower than 10 seconds.

The{scan_interval_config} is the scan interval for the config data (optional, defaults to None). This is static data, but it can be changed via app or by writing to the registers. This is only needed if you want to read config data. If required, set to startup or a slow scan interval like days: 1.

The{debug_mqtt} is the flag to indicate detailed mqtt debugging is needed (optional, defaults to False)

All scan intervals can be configured as a positive timedelta:

• in seconds: 60
• in time string format: "00:01:00"
• in timedelta dict format:

  scan_interval:
  days: 0
  hours: 0
  minutes: 0
  seconds: 60

All scan intervals, except the default realtime scan_interval, can also be set to startup to only scan the data at startup.

If a scan interval is not defined, the related dataset and sensors will not be fetched and loaded.

Only the realtime dataset will always be fetched by default.

Configure the inverter

The last step is to configure the inverter (actually the Wifi communication module AIO3 attached to the inverter) to talk with the local MQTT broker and not directly with the SAJ broker; to do that, you have two options:

• Change the MQTT broker using eSAJ Home app (see this) to your local MQTT broker.
• Poison your local DNS to redirect the MQTT messages to your broker. This consists in telling your home router to point to your broker IP when domain mqtt.saj-solar.com is queried by the inverter, so refer to your router capabilities to handle this. This may require some time for the inverter to discover that the broker IP changed, so you may want to remove and reinstall the Wifi AIO3 module to restart it. Optionally, you can additionally bridge your local MQTT broker to SAJ mqtt broker if you still want to use the eSAJ Home app. For instructions, see this.

HA services

This integration also exposes a few services that can be used from within home assistant. The following services are available:

• saj_mqtt.set_app_mode, to write a specific app mode (from a list of predefined values)
• saj_mqtt.write_register, to write to any value to any register (USE AT OWN RISK AS THIS CAN DAMAGE YOUR INVERTER!)
• saj_mqtt.read_register, to read a value of any register
• saj_mqtt.refresh_config_data, to refresh the config data sensors
• saj_mqtt.refresh_battery_controller_data, to refresh teh battery controller data sensors