homebridge-wiser is a plug-in for Homebridge that adds support for the original Clipsal C-Bus Wiser and the Clipsal Wiser 2.
Accessories are automatically discovered from the Wiser project. To add additional accessories, add them to your Wiser project and restart homebridge.
You can install the plug-in using npm
:
sudo npm install -g homebridge-wiser
You will need to make some changes in your config file if you are upgrading from version 1 of this plugin.
The platform name is now homebridge-wiser
. Note that this change means your accessories will be re-created.
Other enhancements in 2.0 include:
homebridge-wiser is added as a platform
in your config.json:
"platforms": [
{
"platform": "homebridge-wiser",
"name": "Wiser",
"wiserAddress": "1.2.3.4",
"wiserUsername": "admin",
"wiserPassword": "yourpassword",
"wiserPort": "8888",
"ignoredGAs": [
{
"network": 254,
"ga": 4
},
{
"network": 254,
"ga": 5
}
],
}
]
The ignoredGAs
section is optional. If a group address is listed in this section, an accessory will not be created
even if it is found in your Wiser project.
After adding the platform, simply restart homebridge and your C-Bus groups will be added as new accessories automatically.
Note: wiserPort
is not the web server port on your wiser (80). Unless you have changed your Wiser from the default settings,
8888
is the correct value.
Thanks to Michael Farrell for some useful Documentation on the Wiser.