pavelrevak pystlink issues

pavelrevak / pystlink

Python tool for flashing and debugging STM32 devices using ST-LINK/V2

MIT License

216 stars 58 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Have you supported to configure option bytes?

#30 zhangxj-1 opened 1 year ago
2
*** Supply voltage is 0.01V, but minimum for FLASH program or erase is 2.0V ***

#29 jguembe closed 10 months ago
2
Pip support and programming interface

#28 AKJ7 opened 1 year ago
0
Support for STM32G0B1RET6

#27 ksbboxx opened 2 years ago
0
flash erase command can't suport STM32H7

#26 JesseLliang opened 2 years ago
1
Timeout error

#25 bibinaliasgad opened 3 years ago
0
Issue running flash

#24 skorber closed 3 years ago
1
STM32G0x devices are missed

#23 Fasten90 opened 3 years ago
1
Reset does not work with ST-LINK/V3

#22 thomas-rkk closed 3 years ago
0
stm32l151zDT6 not supported. Check protection error

#21 wolsty7 opened 4 years ago
5
serial port getting engaged after reading single command in python.

#20 eronenergy opened 4 years ago
11
Detecting disconnect between ST-Link and target

#19 jimfred closed 4 years ago
1
stlinkv2: Fix type with minimum required version.

#18 UweBonnes closed 4 years ago
0
STM32FP - direct flashing is reverted

#17 pavelrevak opened 4 years ago
13
Features

#16 UweBonnes closed 4 years ago
1
getting I/O error(13): Permission denied while flashing the new credentials into mcu through python

#15 eronenergy closed 4 years ago
0
Fixed serial numbers for STlink dongles with non-string serial numbers.

#14 casnacaj closed 5 years ago
1
Features

#13 UweBonnes closed 5 years ago
5
question: nu-link programmer

#12 markfink opened 5 years ago
1
pystlink as a library

#11 simonnilsson closed 5 years ago
2
Would it be possible to extend this program to access STM8's?

#10 AokiAhishatsu opened 6 years ago
3
fix for “Error unlocking FLASH”

#9 ZhouChenghong opened 6 years ago
2
Fixes bug on parameter error 16384

#8 jxltom closed 6 years ago
0
flash:erase:verify:address:bin will raise *** Parameter error: 16384 *** when writing bin file to address which already contain data

#7 jxltom closed 6 years ago
2
*** USB Error: [Errno 32] Pipe error ***

#6 rfb opened 6 years ago
3
*** ST-Link/V2 is not connected ***

#5 mirzafahad opened 7 years ago
16
Wont run

#4 zaidshakil opened 7 years ago
4
It can't work with error '*** Error unlocking FLASH ***'

#3 chenwq3 closed 7 years ago
6
Upoload command not implemented?

#2 vladiks closed 7 years ago
2
pystlink says it can't connect to CPU

#1 gtalusan opened 8 years ago
0

pavelrevak / pystlink

issues

Have you supported to configure option bytes?

* Supply voltage is 0.01V, but minimum for FLASH program or erase is 2.0V *

Pip support and programming interface

Support for STM32G0B1RET6

flash erase command can't suport STM32H7

Timeout error

Issue running flash

STM32G0x devices are missed

Reset does not work with ST-LINK/V3

stm32l151zDT6 not supported. Check protection error

serial port getting engaged after reading single command in python.

Detecting disconnect between ST-Link and target

stlinkv2: Fix type with minimum required version.

STM32FP - direct flashing is reverted

Features

getting I/O error(13): Permission denied while flashing the new credentials into mcu through python

Fixed serial numbers for STlink dongles with non-string serial numbers.

Features

question: nu-link programmer

pystlink as a library

Would it be possible to extend this program to access STM8's?

fix for “Error unlocking FLASH”

Fixes bug on parameter error 16384

flash:erase:verify:address:bin will raise * Parameter error: 16384 * when writing bin file to address which already contain data

* USB Error: [Errno 32] Pipe error *

* ST-Link/V2 is not connected *

Wont run

It can't work with error '* Error unlocking FLASH *'

Upoload command not implemented?

pystlink says it can't connect to CPU