⚠️ This repo is no longer active and has been archived. The active repo can be found at https://git.coopcloud.tech/PeachCloud/peach-workspace/src/branch/main/peach-network ⚠️

---

peach-network

Networking microservice module for PeachCloud. Query and configure device interfaces using JSON-RPC over http.

Interaction with wireless interfaces occurs primarily through the wpactrl crate which provides "a pure-Rust lowlevel library for controlling wpasupplicant remotely". This approach is akin to using wpa_cli (a WPA command line client).

Note: This module is a work-in-progress.

JSON-RPC API

Methods for retrieving data:

Method	Parameters	Description
available_networks	iface	List SSID, flags (security), frequency and signal level for all networks in range of given interface
id	iface, ssid	Return ID of given SSID
ip	iface	Return IP of given network interface
ping		Respond with success if microservice is running
rssi	iface	Return average signal strength (dBm) for given interface
rssi_percent	iface	Return average signal strength (%) for given interface
saved_networks		List all networks saved in wpasupplicant config
ssid	iface	Return SSID of currently-connected network for given interface
state	iface	Return state of given interface
status	iface	Return status parameters for given interface
traffic	iface	Return network traffic for given interface

Methods for modifying state:

Method	Parameters	Description
activate_ap		Activate WiFi access point (start wpa_supplicant@ap0.service)
activate_client		Activate WiFi client connection (start wpa_supplicant@wlan0.service)
add	ssid, pass	Add WiFi credentials to wpa_supplicant-wlan0.conf
check_iface		Activate WiFi access point if client mode is active without a connection
connect	id, iface	Disable other networks and attempt connection with AP represented by given id
delete	id, iface	Remove WiFi credentials for given network id and interface
disable	id, iface	Disable connection with AP represented by given id
disconnect	iface	Disconnect given interface
modify	id, iface, password	Set a new password for given network id and interface
reassociate	iface	Reassociate with current AP for given interface
reconfigure		Force wpa_supplicant to re-read its configuration file
reconnect	iface	Disconnect and reconnect given interface
save		Save configuration changes to wpa_supplicant-wlan0.conf

API Documentation

API documentation can be built and served with cargo doc --no-deps --open. This set of documentation is intended for developers who wish to work on the project or better understand the API of the src/network.rs module.

Environment

The JSON-RPC HTTP server address and port can be configured with the PEACH_NETWORK_SERVER environment variable:

export PEACH_NETWORK_SERVER=127.0.0.1:5000

When not set, the value defaults to 127.0.0.1:5110.

Logging is made available with env_logger:

export RUST_LOG=info

Other logging levels include debug, warn and error.

Setup

Clone this repo:

git clone https://github.com/peachcloud/peach-network.git

Move into the repo and compile:

cd peach-network
cargo build --release

Run the binary (sudo needed to satisfy permission requirements):

sudo ./target/release/peach-network

Debian Packaging

A systemd service file and Debian maintainer scripts are included in the debian directory, allowing peach-network to be easily bundled as a Debian package (.deb). The cargo-deb crate can be used to achieve this.

Install cargo-deb:

cargo install cargo-deb

Move into the repo:

cd peach-network

Build the package:

cargo deb

The output will be written to target/debian/peach-network_0.2.4_arm64.deb (or similar).

Build the package (aarch64):

cargo deb --target aarch64-unknown-linux-gnu

Install the package as follows:

sudo dpkg -i target/debian/peach-network_0.2.4_arm64.deb

The service will be automatically enabled and started.

Uninstall the service:

sudo apt-get remove peach-network

Remove configuration files (not removed with apt-get remove):

sudo apt-get purge peach-network

Example Usage

Retrieve IP address for wlan0

With microservice running, open a second terminal window and use curl to call server methods:

curl -X POST -H "Content-Type: application/json" -d '{"jsonrpc": "2.0", "method": "ip", "params" : {"iface": "wlan0" }, "id":1 }' 127.0.0.1:5110

Server responds with:

{"jsonrpc":"2.0","result":"192.168.1.21","id":1}

Retrieve SSID of connected access point for wlan1

curl -X POST -H "Content-Type: application/json" -d '{"jsonrpc": "2.0", "method": "ssid", "params" : {"iface": "wlan1" }, "id":1 }' 127.0.0.1:5110

Server response when interface is connected:

{"jsonrpc":"2.0","result":"Home","id":1}

Server response when interface is not connected:

{"jsonrpc":"2.0","error":{"code":-32003,"message":"Failed to retrieve SSID for wlan1. Interface may not be connected."},"id":1}

Retrieve list of SSIDs for all networks in range of wlan0

curl -X POST -H "Content-Type: application/json" -d '{"jsonrpc": "2.0", "method": "available_networks", "params" : {"iface": "wlan0" }, "id":1 }' 127.0.0.1:5110

Server response when interface is connected:

{"jsonrpc":"2.0","result":"[{\"frequency\":\"2412\",\"signal_level\":\"-72\",\"ssid\":\"Home\",\"flags\":\"[WPA2-PSK-CCMP][ESS]\"},{\"frequency\":\"2472\",\"signal_level\":\"-56\",\"ssid\":\"podetium\",\"flags\":\"[WPA2-PSK-CCMP+TKIP][ESS]\"}]","id":1}

Server response when interface is not connected:

{"jsonrpc":"2.0","error":{"code":-32006,"message":"No networks found in range of wlan0"},"id":1}

Retrieve network traffic statistics for wlan1

curl -X POST -H "Content-Type: application/json" -d '{"jsonrpc": "2.0", "method": "traffic", "params" : {"iface": "wlan1" }, "id":1 }' 127.0.0.1:5110

Server response if interface exists:

{"jsonrpc":"2.0","result":"{\"received\":26396361,\"transmitted\":22352530}","id":1}

Server response when interface is not found:

{"jsonrpc":"2.0","error":{"code":-32004,"message":"Failed to retrieve network traffic for wlan3. Interface may not be connected"},"id":1}

Retrieve status information for wlan0

curl -X POST -H "Content-Type: application/json" -d '{"jsonrpc": "2.0", "method": "status", "params" : {"iface": "wlan0" }, "id":1 }' 127.0.0.1:5110

Server response if interface exists:

{"jsonrpc":"2.0","result":"{\"address\":\"b8:27:eb:9b:5d:5f\",\"bssid\":\"f4:8c:eb:cd:31:81\",\"freq\":\"2412\",\"group_cipher\":\"CCMP\",\"id\":\"0\",\"ip_address\":\"192.168.0.162\",\"key_mgmt\":\"WPA2-PSK\",\"mode\":\"station\",\"pairwise_cipher\":\"CCMP\",\"ssid\":\"Home\",\"wpa_state\":\"COMPLETED\"}","id":1}

Server response when interface is not found:

{"jsonrpc":"2.0","error":{"code":-32013,"message":"Failed to open control interface for wpasupplicant: No such file or directory (os error 2)"},"id":1}

Licensing

AGPL-3.0