Copyright (C) 2011 - 2013 by Johns. All Rights Reserved. Copyright (C) 2018 by pesintta, rofafor.
SPDX-License-Identifier: AGPL-3.0-only
This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details.
A VA-API output device plugin for VDR.
o Based on softhddevice by Johns: http://projects.vdr-developer.org/projects/plg-softhddevice
o Video decoder CPU / VAAPI
o Video output VAAPI
o Audio FFMpeg / Alsa / Analog / Digital
o HDMI/SPDIF pass-through
o VDR ScaleVideo API
o Autocrop
o Grab image (no OSD!)
o Suspend / Detach
o Letterbox, Stretch and Center cut-out video display modes
git clone https://github.com/pesintta/vdr-plugin-vaapidevice.git
cd vdr-plugin-vaapidevice
make
make install
You can edit Makefile to enable/disable Alsa support.
The default is to autodetect as much as possible.
If any issues or bugs arise, please, open an Github issue here:
https://github.com/pesintta/vdr-plugin-vaapidevice/issues
Remember to include your system report into the Github issue by
the included script:
export DISPLAY=:0.0
./generate_system_report.sh
Following is supported:
DISPLAY=:0.0
x11 display name
Only if alsa is configured:
ALSA_DEVICE=default
alsa PCM device name
ALSA_PASSTHROUGH_DEVICE=
alsa pass-though (AC-3,E-AC-3,DTS,...) device name
ALSA_MIXER=default
alsa control device name
ALSA_MIXER_CHANNEL=PCM
alsa control channel name
Following is supported:
vaapidevice.MakePrimary = 0
0 = no change, 1 make vaapidevice primary at start
vaapidevice.HideMainMenuEntry = 0
0 = show vaapidevice main menu entry, 1 = hide entry
vaapidevice.Osd.Width = 0
0 = auto (=display, unscaled) n = fixed osd size scaled for display
vaapidevice.Osd.Height = 0
0 = auto (=display, unscaled) n = fixed osd size scaled for display
<res> of the next parameters is 576i, 720p, 1080i, 1080p, or 2160p.
vaapidevice.<res>.Scaling = 0
0 = normal, 1 = fast, 2 = HQ, 3 = anamorphic
vaapidevice.<res>.Deinterlace = 0
0 = disabled, 1 = bob, 2 = weave, 3 = motion adaptive, 4 = motion compensated
vaapidevice.<res>.Denoise = 0
0 .. 1000 noise reduction level (0 off, 1000 max)
vaapidevice.<res>.Sharpness = 0
-1000 .. 1000 sharpness level (0 off, -1000 max blur,
1000 max sharp)
vaapidevice.<res>.CutTopBottom = 0
Cut 'n' pixels at at top and bottom of the video picture.
vaapidevice.<res>.CutLeftRight = 0
Cut 'n' pixels at at left and right of the video picture.
vaapidevice.AudioDelay = 0
+n or -n ms
delay audio or delay video
vaapidevice.AudioPassthrough = 0
0 = none, 1 = PCM, 2 = MPA, 4 = AC-3, 8 = EAC-3, -X disable
for PCM/AC-3/EAC-3 the pass-through device is used and the audio
stream is passed undecoded to the output device.
z.b. 12 = AC-3+EAC-3, 13 = PCM+AC-3+EAC-3
note: MPA/DTS/TrueHD/... aren't supported yet
negative values disable passthrough
vaapidevice.AudioDownmix = 0
0 = none, 1 = downmix
Use ffmpeg/libav downmix of AC-3/EAC-3 audio to stereo.
vaapidevice.AudioSoftvol = 0
0 = off, use hardware volume control
1 = on, use software volume control
vaapidevice.AudioNormalize = 0
0 = off, 1 = enable audio normalize
vaapidevice.AudioMaxNormalize = 0
maximal volume factor/1000 of the normalize filter
vaapidevice.AudioCompression = 0
0 = off, 1 = enable audio compression
vaapidevice.AudioMaxCompression = 0
maximal volume factor/1000 of the compression filter
vaapidevice.AudioStereoDescent = 0
reduce volume level (/1000) for stereo sources
vaapidevice.AudioBufferTime = 0
0 = default (336 ms)
1 - 1000 = size of the buffer in ms
vaapidevice.AutoCrop.Interval = 0
0 disables auto-crop
n each 'n' frames auto-crop is checked.
vaapidevice.AutoCrop.Delay = 0
if auto-crop is over 'n' intervals the same, the cropping is
used.
vaapidevice.AutoCrop.Tolerance = 0
if detected crop area is too small, cut max 'n' pixels at top and
bottom.
vaapidevice.Background = 0
32bit RGBA background color
(Red * 16777216 + Green * 65536 + Blue * 256 + Alpha)
or hex RRGGBBAA
grey 127 * 16777216 + 127 * 65536 + 127 * 256 => 2139062016
in the setup menu this is entered as (24bit RGB and 8bit Alpha)
(Red * 65536 + Green * 256 + Blue)
vaapidevice.Suspend.Close = 0
1 suspend closes x11 window, connection and audio device.
(use svdrpsend plug vaapidevice RESU to resume, if you have no lirc)
vaapidevice.Suspend.X11 = 0
1 suspend stops X11 server (not working yet)
vaapidevice.60HzMode = 0
0 disable 60Hz display mode
1 enable 60Hz display mode
vaapidevice.SoftStartSync = 0
0 disable soft start of audio/video sync
1 enable soft start of audio/video sync
vaapidevice.Video4to3DisplayFormat = 1
0 pan and scan
1 letter box
2 center cut-out
vaapidevice.VideoOtherDisplayFormat = 1
0 pan and scan
1 pillar box
2 center cut-out
Add "XKeySym." definitions to /etc/vdr/remote.conf to control
the vdr and plugin with the connected input device.
fe.
XKeySym.Up Up
XKeySym.Down Down
...
Additional to the x11 input sends the window close button "Close".
fe.
XKeySym.Power Close
Use vdr -h to see the command line arguments supported by the plugin.
-a audio_device
Selects audio output module and device.
"" to disable audio output
other to use alsa audio module (if compiled with alsa
support)
-t trace_mode
Sets the default tracing bitmask for debug message categories. The
available categories can be found in the "misc.h" header file.
Use 'svdrpsend plug vaapidevice HELP' to see the SVDRP commands help
and which are supported by the plugin.
See keymacros.conf how to setup the macros.
This are the supported key sequences:
@vaapidevice Blue 1 0 disable pass-through
@vaapidevice Blue 1 1 enable pass-through
@vaapidevice Blue 1 2 toggle pass-through
@vaapidevice Blue 1 3 decrease audio delay by 10ms
@vaapidevice Blue 1 4 increase audio delay by 10ms
@vaapidevice Blue 1 5 toggle ac3 mixdown
@vaapidevice Blue 2 0 disable fullscreen
@vaapidevice Blue 2 1 enable fullscreen
@vaapidevice Blue 2 2 toggle fullscreen
@vaapidevice Blue 2 3 disable auto-crop
@vaapidevice Blue 2 4 enable auto-crop
@vaapidevice Blue 2 5 toggle auto-crop
@vaapidevice Blue 3 0 stretch 4:3 to display
@vaapidevice Blue 3 1 letter box 4:3 in display
@vaapidevice Blue 3 2 center cut-out 4:3 to display
@vaapidevice Blue 3 9 rotate 4:3 to display zoom mode
@vaapidevice Blue 4 0 stretch other aspect ratios to display
@vaapidevice Blue 4 1 letter box other aspect ratios in display
@vaapidevice Blue 4 2 center cut-out other aspect ratios to display
@vaapidevice Blue 4 9 rotate other aspect ratios to display zoom mode
@vaapidevice Blue 5 0 toggle debug statistics osd
Click into video window to toggle fullscreen/window mode, only if you
have a window manager running.
media-video/vdr (version >=2.2.0)
Video Disk Recorder - turns a pc into a powerful set top box
for DVB.
http://www.tvdr.de/
media-video/ffmpeg (version >=3.2)
Complete solution to record, convert and stream audio and
video. Includes libavcodec and libswresample.
http://ffmpeg.org
media-libs/alsa-lib
Advanced Linux Sound Architecture Library
http://www.alsa-project.org
x11-libs/libva (version >=2.0.0)
Video Acceleration (VA) API for Linux
http://www.freedesktop.org/wiki/Software/vaapi
x11-libs/libva-intel-driver (version >=2.0.0)
HW video decode support for Intel integrated graphics
http://www.freedesktop.org/wiki/Software/vaapi
x11-libs/libxcb,
X C-language Bindings library
http://xcb.freedesktop.org
x11-libs/xcb-util,
x11-libs/xcb-util-wm,
x11-libs/xcb-util-keysyms
X C-language Bindings library
http://xcb.freedesktop.org
Only versions >= 0.3.8 are good supported
x11-libs/libX11
X.Org X11 library
http://xorg.freedesktop.org