Mopidy-Raspberry-GPIO
.. image:: https://img.shields.io/pypi/v/Mopidy-Raspberry-GPIO.svg :target: https://pypi.org/project/Mopidy-Raspberry-GPIO/ :alt: Latest PyPI version
.. image:: https://img.shields.io/circleci/build/gh/pimoroni/mopidy-raspberry-gpio :target: https://circleci.com/gh/pimoroni/mopidy-raspberry-gpio :alt: CircleCI build status
.. image:: https://img.shields.io/codecov/c/gh/pimoroni/mopidy-raspberry-gpio :target: https://codecov.io/gh/pimoroni/mopidy-raspberry-gpio :alt: Test coverage
Mopidy extension for GPIO input on a Raspberry Pi
Ensure Mopidy has access to GPIO::
sudo usermod -a -G gpio mopidy
Make sure you have the RPi.GPIO library installed::
sudo apt install python3-rpi.gpio
Install by running::
python3 -m pip install Mopidy-Raspberry-GPIO
Or, if available, install the Debian/Ubuntu package from apt.mopidy.com <https://apt.mopidy.com/>
_.
Before starting Mopidy, you must add configuration for Mopidy-Raspberry-GPIO to your Mopidy configuration file::
[raspberry-gpio]
enabled = true
bcm5 = play_pause,active_low,250
bcm6 = prev,active_low,250
bcm16 = next,active_low,250
bcm21 = volume_down,active_low,10,rotenc_id=vol,step=1
bcm20 = volume_up,active_low,10,rotenc_id=vol,step=1
Each bcmN entry corresponds to the BCM pin of that number.
You must assign an event, mode and bouncetime (ms) to your desired pins.
Supported events:
Supported modes:
Events volume_up and volume_down both support an (optional) "step" option, which controls the amount (in percent) that the volume is adjusted with each button press.
Eg::
[raspberry-gpio]
enabled = true
bcm5 = play_pause,active_low,250
bcm6 = volume_down,active_low,250,step=1
bcm16 = next,active_low,250
bcm20 = volume_up,active_low,250,step=1
Source code <https://github.com/pimoroni/mopidy-raspberry-gpio>
_Issue tracker <https://github.com/pimoroni/mopidy-raspberry-gpio/issues>
_Changelog <https://github.com/pimoroni/mopidy-raspberry-gpio/blob/master/CHANGELOG.rst>
_Phil Howard <https://github.com/pimoroni>
__Phil Howard <https://github.com/pimoroni>
__Contributors <https://github.com/pimoroni/mopidy-raspberry-gpio/graphs/contributors>
_