andimik commented 4 years ago

Summary of closed issue #28 (= Satellite sources of DAB feeds - part 2)

In the meanwhile there are lots of radios stations all over Europe using DVB-MPE, use the new tools mpe2aac, mpe2mpa or mpe2ts to extract
some more DAB streams detected from Italy (RAI) and Turkey, some (orbital) changes over the past months
German EDI transponder filled with (currently) nine DAB ensembles
Improvements in Dablin done (frame-align stream not needed any more)
NRK DAB feed transponder (DVB-GSE??) still not be decodeable by any tool, only a hex editor shows the content
EDI DAB services from both German BR and RBB as well as VRT (Belgium) started with tests over the internet, use wget -q -O - https://rbbedi.irt.de:443/services/x | dablin_gtk -f edi -I wget -q -O - https://bredi.irt.de:443/services/x | dablin_gtk -f edi -I wget -q -O - http://edihttp.vrt.be:8187/services/x | dablin_gtk -f edi -I -1 to listen to, whereas x is the subchannel ID, see https://www.fmlist.org/sendertabelle/dab-ww.php and http://search-hradio.irt.de/ Combining them to a single DAB ETI stream is not 100% possible, but there is a workaround with dropouts
for DVB-IP streams the TSReader now shows the UDP port number since 2.8.55a, alternatively, you get it in Wireshark as well

andimik commented 1 year ago

https://www.digitalbitrate.com/dtv.php?mux=11054&liste=2&live=74&lang=en

Yes, seems so. Last capture was on 5th October.

jpuigs commented 1 year ago

I have no signal too.

jpuigs commented 1 year ago

I guess they need the remaining free capacity for the new Kosmos Jazz program to be added soon.

4 months later.......... it has finally apperaed !!!!

Ensemble:  (0xe000)
****************************************************************************
 #  Programme Label   Serv.Id.  P/S SubCh Capac.Units   Prot.   Bitrate Mode
****************************************************************************
 1:            Proto  (0x1000)  Prm   1   80 (  0- 79)  eep-2a  80 Kb/s DAB+
 2:    Deftero 103,7  (0x1001)  Prm   2  128 ( 80-207)  eep-2a 128 Kb/s DAB+
 3:            Trito  (0x1002)  Prm   3  128 (208-335)  eep-2a 128 Kb/s DAB+
 4:        Era Sport  (0x1003)  Prm   4   80 (336-415)  eep-2a  80 Kb/s DAB+
 5:           Kosmos  (0x1004)  Prm   5  128 (416-543)  eep-2a 128 Kb/s DAB+
 6:  Voice of Greece  (0x1005)  Prm   6   80 (544-623)  eep-2a  80 Kb/s DAB+
 7:         Zeppelin  (0x1006)  Prm   7  112 (624-735)  eep-2a 112 Kb/s DAB+
 8:      Kosmos Jazz  (0x1007)  Prm   8  128 (736-863)  eep-2a 128 Kb/s DAB+

Free CUs on this multiplex =   0

andimik commented 1 year ago

Could you please check again 42East? Digitalbitrate.com has captured it again.

jpuigs commented 1 year ago

I can't get any signal. digitalbitrate shows it now at 10958 V, instead of 10953 V, but it's impossible that "new" frequency.

ON 10958 V. there is a TRT signal, SR 6250, which carries 2 biss encrypted channel feeds.

humaxboy commented 1 year ago

And we shall expect the forthcoming nationwide Polish mux (R1) also on satellite, probably on 23.5 East, where lots of analog Polish radio feeds are. Its tender has just started, but the provider is still unknown. So we will see in future ...

http://www.archiwum.krrit.gov.pl/AdvertismentsSync/Main/0/235/og_220215_mux_r1_6_miejsc.pdf

Currently, there is package on 7E (DVB-MPE format) at 12.515 GHz, pol. V, SR: 1303, FEC: 3/4; DVB-S / QPSK. Line-up: PID 2010 = Jedynka IP: 192.168.30.101/230.0.0.10 (name: Jedynka, title: Master_MPEG2_256 / 48_St) - actual quality: AAC LC 256 kbit / s PID 2020 = Dwójka IP: 192.168.30.102/230.0.0.20 (name: Dwojka, title: Master_MPEG4_256 / 48_St) - actual quality: AAC LC 256 kbit / s PID 2030 = Three IP: 192.168.30.103/230.0.0.30 (name: Trojka, title: Master_MPEG4_128 / 32_St) - actual quality: AAC LC 256 kbit / s PID 2040 = Polskie Radio 24 IP: 192.168.30.104/230.0.0.40 (name: PR24, title: Master_123 / 32_JSt) - actual quality: AAC LC 128 kbit / s PID 2050 = Radio Polonia IP: 192.168.30.105/230.0.0.50 (name: Polonia, title: Master_MPEG_Dual) - there are currently two different stations in the left and right channel, actual quality: AAC LC 128 kbit / s PID 2060 = Jedynka AM IP: 192.168.30.106/230.0.0.60 (name: JedynkaAM, title: Master_MPEG4_128 / 32_St) - new , actual quality: AAC LC 80 kbit / s mono (source : https://forum.satkurier.pl/topic/11151-dosy%C5%82y-polskiego-radia-dla-fm-z-7%C2%B0e-namierzone/page/2/#comments) Maybe they will use this position ?

andimik commented 1 year ago

or 23.5 E, where lots of Polish feeds are.

BTW: Please don't translate proper names like Jedynka.

and:

Additionally to PID 7031, DAB Italia got the old PID 777 on the same transponder on 9E.

grafik

humaxboy commented 1 year ago

ERT DAB on 39E - notice that this programm was added DefteroLaika (0x1008) Prm 9 80 (784-863) eep-2a 80 Kb/s DAB+

Ensemble: ERT DAB (0xe000) 1: Kosmos Jazz (0x1007) Prm 8 128 (656-783) eep-2a 128 Kb/s DAB+ 2: Proto (0x1000) Prm 1 80 ( 0- 79) eep-2a 80 Kb/s DAB+ 3: Deftero 103,7 (0x1001) Prm 2 96 ( 80-175) eep-2a 96 Kb/s DAB+ 4: Trito (0x1002) Prm 3 128 (176-303) eep-2a 128 Kb/s DAB+ 5: Era Sport (0x1003) Prm 4 80 (304-383) eep-2a 80 Kb/s DAB+ 6: Kosmos (0x1004) Prm 5 96 (384-479) eep-2a 96 Kb/s DAB+ 7: Voice of Greece (0x1005) Prm 6 64 (480-543) eep-2a 64 Kb/s DAB+ 8: Zeppelin (0x1006) Prm 7 112 (544-655) eep-2a 112 Kb/s DAB+ 9: DefteroLaika (0x1008) Prm 9 80 (784-863) eep-2a 80 Kb/s DAB+

andimik commented 1 year ago

Could you check 42E (TRT)?

Seems they are back since a few days now.

https://www.digitalbitrate.com/dtv.php?mux=10958&liste=1&live=74&lang=en

jpuigs commented 1 year ago

Yes , they are back !

Ensemble: TRT DAB+         (0x4fff)
****************************************************************************
 #  Programme Label   Serv.Id.  P/S SubCh Capac.Units   Prot.   Bitrate Mode
****************************************************************************
 1: +Haber            (0x37)  Prm  16   48 (624-671)  eep-4a  96 Kb/s DAB+
 2: +World            (0x38)  Prm  17   48 (672-719)  eep-4a  96 Kb/s DAB+
 3: +Arapca           (0x39)  Prm  18   48 (720-767)  eep-4a  96 Kb/s DAB+
 4: +Radyo 1          (0x32)  Prm  11   48 (  0- 47)  eep-4a  96 Kb/s DAB+
 5: +TRT FM           (0x33)  Prm  12  144 ( 48-191)  eep-1a  96 Kb/s DAB+
 6: +Radyo 3          (0x34)  Prm  13  144 (192-335)  eep-1a  96 Kb/s DAB+
 7: +Nagme            (0x35)  Prm  14  144 (336-479)  eep-1a  96 Kb/s DAB+
 8: +Turku            (0x36)  Prm  15  144 (480-623)  eep-1a  96 Kb/s DAB+
Free CUs on this multiplex =  96

People who configure multiplexer seems they don't know what are doing... Some ones with very strong protection (1A), and some others with a soft protection (4A). It has no sense. All of them are from TRT public broadcaster.

andimik commented 1 year ago

NDR Schleswig-Holstein Kiel (239.229.96.33:50000) has replaced NDR Niedersachsen Hannover (239.229.96.38:50000), although the Kiel SFN only consists of 2 transmitters.

$ cat /tmp/ndr_kiel.eti | ni2out --list
NDR SH KI        (0x10f2)
 0 : NDR 2 SH         (0xde82) Pri subch= 2 start= 96 CUs= 96 PL=eep-2a bitrate=96 DAB+
 1 : NDR Info SH      (0xde84) Pri subch= 4 start=288 CUs= 96 PL=eep-2a bitrate=96 DAB+
 2 : NDR Info Spezial (0xdf84) Pri subch= 5 start=384 CUs= 96 PL=eep-2a bitrate=96 DAB+
 3 : R.SH             (0xd3e8) Pri subch=20 start=800 CUs= 54 PL=eep-3a bitrate=72 DAB+
 4 : NDR Blue         (0xd354) Pri subch= 7 start=576 CUs= 96 PL=eep-2a bitrate=96 DAB+
 5 : NDR Kultur       (0xd383) Pri subch= 3 start=192 CUs= 96 PL=eep-2a bitrate=96 DAB+
 6 : N-JOY            (0xd385) Pri subch= 6 start=480 CUs= 96 PL=eep-2a bitrate=96 DAB+
 7 : NDR Schlager     (0xd387) Pri subch= 8 start=672 CUs= 96 PL=eep-2a bitrate=96 DAB+
 8 : NDR 1 SH KI      (0xd4e1) Pri subch= 1 start=  0 CUs= 96 PL=eep-2a bitrate=96 DAB+

grafik

The other 14 ensembles stay the same.

see 7446ab4

mrwish7 commented 1 year ago

It may be possible to use an SDR to receive the DVB-GSE encapsulated feeds - i.e. the two German national muxes on 23.5°E 12641V SR 1500 and NRK on 0.8°W 10720H SR 5400.

The Germans with SR 1500 are low enough bandwidth to even be receivable with a cheap RTL-SDR stick (which are also used for terrestrial DAB reception of course!). A source for LNB power would be needed, for example a cheap DVB-S/2 receiver with a loop through socket (SDR connected to the loop out).

Two GNURadio projects exist -

https://github.com/igorauad/gr-dvbs2rx

This processes DVB-S2 and includes decoding baseband frames, maybe an output of this could be piped to bbfedi2eti

Then there is also -

https://github.com/drmpeg/gr-dvbgse

This states that it can process GSE data, and that it is possible to use the first project (gr-dvbs2rx) as its input. I'm struggling to understand how the output of this would then be read, I guess it would work in a similar way to dvbnet does for the MPE services (e.g. French m1+m2 on 5°W and the German regionals on 7°E).

Needs more investigation of course, I want to try and receive some plain DVB-S2 via my RTL-SDR stick (using a satellite receiver as LNB power as described) first to see how it all works.

andimik commented 1 year ago

We also got that working with an SDR, see https://github.com/pabr/leansdr/issues/16

Please note, that I only could test it offline, not live reception.

And you need an SDR that covers the high frequency of around 2 GHz which lots of the tuners can't.

E4000 or HackRF should handle that.

mrwish7 commented 1 year ago

That looks great, thanks for the link @andimik

I'd completely forgot about the high frequency cut-off, I remembered a little while after posting. My RTL-SDR is one of the newer v3 ones that cuts off at 1766MHz, but I have a HackRF as well in any case so that should be suitable.

mrwish7 commented 1 year ago

Success with the HackRF! I wrote a little tool in GNURadio to record ~2MHz of IQ centred on 12641V (for 23.5°E) to a WAV file, which leansdr then successfully decodes to BBF, which bbfedi2eti decodes successfully.

adam@LAPTOP-TDJ2JR4U:~$ cat test.bb | bbfedi2eti -mis 1 2> /dev/null | ni2out --list
DR Deutschland   (0x10bc)
 0 : Dlf              (0xd210) Pri subch=10 start=480 CUs=104 PL=eep-2a bitrate=104 DAB+
 1 : Dlf Kultur       (0xd220) Pri subch=11 start=584 CUs=112 PL=eep-2a bitrate=112 DAB+
 2 : Dlf Nova         (0xd230) Pri subch=12 start=696 CUs=104 PL=eep-2a bitrate=104 DAB+
 3 : DRadio DokDeb    (0xd240) Pri subch=13 start=800 CUs= 36 PL=eep-3a bitrate=48 DAB+
 4 : Schwarzwaldradio (0x100d) Pri subch= 7 start=246 CUs= 42 PL=eep-2b bitrate=64 DAB+
 5 : ENERGY           (0x1a45) Pri subch= 4 start=102 CUs= 54 PL=eep-3a bitrate=72 DAB+
 6 : SCHLAGERPARADIES (0x10c3) Pri subch=20 start=288 CUs= 42 PL=eep-2b bitrate=64 DAB+
 7 : Absolut relax    (0x17fa) Pri subch= 3 start= 48 CUs= 54 PL=eep-3a bitrate=72 DAB+
 8 : RADIO BOB!       (0x15dd) Pri subch=22 start=384 CUs= 54 PL=eep-3a bitrate=72 DAB+
 9 : KLASSIK RADIO    (0xd75b) Pri subch= 6 start=192 CUs= 54 PL=eep-3a bitrate=72 DAB+
10 : sunshine live    (0x15dc) Pri subch=21 start=330 CUs= 54 PL=eep-3a bitrate=72 DAB+
11 : radio horeb      (0xd01c) Pri subch= 5 start=156 CUs= 36 PL=eep-3a bitrate=48 DAB+
12 : ERF Plus         (0x1a64) Pri subch= 2 start=  0 CUs= 48 PL=eep-3a bitrate=64 DAB+
 cat test.bb | bbfedi2eti -mis 2 2> /dev/null | ni2out --list
Antenne DE       (0x11f7)
 0 : Brillux Radio    (0x1299) Pri subch= 0 start=  0 CUs= 54 PL=eep-3a bitrate=72 DAB+
 1 : Absolut GERMANY  (0x121c) Pri subch=18 start=810 CUs= 54 PL=eep-3a bitrate=72 DAB+
 2 : AIDAradio        (0x1259) Pri subch=17 start=756 CUs= 54 PL=eep-3a bitrate=72 DAB+
 3 : SPORTRADIO       (0x12ca) Pri subch=16 start=702 CUs= 54 PL=eep-3a bitrate=72 DAB+
 4 : Beats Radio      (0x1258) Pri subch=14 start=648 CUs= 54 PL=eep-3a bitrate=72 DAB+
 5 : dpd DRIVERSRADIO (0x12c8) Pri subch=11 start=486 CUs= 54 PL=eep-3a bitrate=72 DAB+
 6 : NOSTALGIE        (0x122a) Pri subch=13 start=594 CUs= 54 PL=eep-3a bitrate=72 DAB+
 7 : 80s80s           (0x1057) Pri subch=12 start=540 CUs= 54 PL=eep-3a bitrate=72 DAB+
 8 : TOGGO Radio      (0x1298) Pri subch= 5 start=216 CUs= 54 PL=eep-3a bitrate=72 DAB+
 9 : RTL RADIO        (0x1229) Pri subch= 4 start=162 CUs= 54 PL=eep-3a bitrate=72 DAB+
10 : ANTENNE BAYERN   (0xd318) Pri subch= 2 start=108 CUs= 54 PL=eep-3a bitrate=72 DAB+
11 : ROCK ANTENNE     (0x121b) Pri subch= 1 start= 54 CUs= 54 PL=eep-3a bitrate=72 DAB+
12 : Absolut OLDIE    (0x121a) Pri subch=10 start=432 CUs= 54 PL=eep-3a bitrate=72 DAB+
13 : Absolut BELLA    (0x1219) Pri subch= 9 start=378 CUs= 54 PL=eep-3a bitrate=72 DAB+
14 : Absolut HOT      (0xdc1a) Pri subch= 7 start=270 CUs= 54 PL=eep-3a bitrate=72 DAB+
15 : Absolut TOP      (0x1218) Pri subch= 8 start=324 CUs= 54 PL=eep-3a bitrate=72 DAB+

mrwish7 commented 1 year ago

Happy New Year 2023, Guten Rutsch!

I've been reading the above regarding DVB-GSE via the TBS6903X, and trying to help someone lock 1°W 10720V with his TBS6903X via Team Viewer.

Can someone confirm whether hardware or driver modifications are needed for the GSE BB frames to be passed through properly? Or should some of the Linux drivers just work 'out of the box' now?

We have been trying -

dvblast -s 5400000 -v 13 -f 10720000 -m psk_8 -3 -a 0 -1 171 -u | (sleep 10 && ./pts2bbf) | bbfedi2eti -dst-ip 239.199.2.8 -dst-port 1234 | dablin_gtk

Trying with tune-s2 gives a successful LOCK message, and SNR of around 12.0dB. Trying with dvblast as above give lots of the following error message -

warning: transport_error_indicator on pid 280 (..., sid 0)

Then dvblast tries to re-lock after a few seconds, and the process repeats. Data is being passed through, but pts2bbf doesn't manage to decode it, so bbfedi2eti and dablin receive nothing. It seems like from the message above that the data is being passed through via pseudo PID 280 as expected, but it's either corrupt or partially missing.

He has the deeptho branch of linux_media drivers installed - https://github.com/deeptho/linux_media/ , are different ones needed? (I use the 'plain' open source tbsdtv github ones, but I don't have a GSE-capable card anyway).

We are also going to be able to try with his TBS6909X, but I suspect we will get the same problem.

andimik commented 1 year ago

I'm using

tune-s2 10719 V 5400 -adapter 0 -system DVB-S2 -modulation 8PSK -lnb UNIVERSAL -usals 359.6 -long 13.00 -lat 46.00

(long and lat please adjust)

and that tune-s2 version which is the only working one for DiSEqC, see https://bitbucket.org/majortom/tune-s2/src/master/

$ git show
commit 0b12dd5cca5eb722d6b0f0bcf5a26157879237ec (HEAD -> master, origin/master, origin/HEAD)
Author: Bill Murphy <gc2majortom@gmail.com>
Date:   Sun Feb 16 15:44:17 2020 -0500

then I get

Attempt #1 to connect to gpsd at localhost...
Attempt #2 to connect to gpsd at localhost...
LNB: low: 9750 high: 10600 switch: 11700 
opening: /dev/dvb/adapter0/frontend0
frontend: (TurboSight TBS 6903x (Dual DVB-S/S2/S2X)) fe_type (0) 
[...]
Waiting for motor to move, either wait 45sec or hit 's' to skip
daemonize -> no (0)

Tuning specs: 
System:     DVB-S2 
Frequency:  10719 V 5400 
22khz:      OFF 
Modulation: 8PSK 
FEC:        AUTO 
Inversion:  AUTO 
Rolloff:    AUTO 
Pilot:      AUTO

although there is an error

FE_GET_PROPERTY failed: Invalid argument
Closing frontend ... 
Disconnect from gpsd ...

I can then process the bb frames and get the eti out of it.

dvbstream -o - 8192 | pts2bbf | bbfedi2eti -dst-ip 239.199.2.1 -dst-port 1234 | dablin_gtk

I don't like dvblast because of the mentioned errors.

andimik commented 1 year ago

Hint: For DAB Italia and EuroDAB on 9° East please don't use the Service IDs DAB Radio Italian 1 and DAB Radio Italian 2, as they contain the PID 8191 as well :-(

In some cases (depending on software) you will record the NULL bytes as well.

grafik

basicmaster commented 1 year ago

as they contain the PID 8191 as well :-(

Well, this is not entirely correct: The services don't refer to the PID 8191 - instead the field PCR_PID is set to 8191 = 0x1FFF, according to the standard: "If no PCR is associated with a program definition for private streams, then this field shall take the value of 0x1FFF".

In some cases (depending on software) you will record the NULL bytes as well.

Do you have an example? I would be surprised if a software recorded the filled PID due to such a PMT...

mrwish7 commented 1 year ago

I'm using

tune-s2 10719 V 5400 -adapter 0 -system DVB-S2 -modulation 8PSK -lnb UNIVERSAL -usals 359.6 -long 13.00 -lat 46.00

(long and lat please adjust)

and that tune-s2 version which is the only working one for DiSEqC, see https://bitbucket.org/majortom/tune-s2/src/master/

$ git show
commit 0b12dd5cca5eb722d6b0f0bcf5a26157879237ec (HEAD -> master, origin/master, origin/HEAD)
Author: Bill Murphy <gc2majortom@gmail.com>
Date:   Sun Feb 16 15:44:17 2020 -0500

then I get

Attempt #1 to connect to gpsd at localhost...
Attempt #2 to connect to gpsd at localhost...
LNB: low: 9750 high: 10600 switch: 11700 
opening: /dev/dvb/adapter0/frontend0
frontend: (TurboSight TBS 6903x (Dual DVB-S/S2/S2X)) fe_type (0) 
[...]
Waiting for motor to move, either wait 45sec or hit 's' to skip
daemonize -> no (0)

Tuning specs: 
System:     DVB-S2 
Frequency:  10719 V 5400 
22khz:      OFF 
Modulation: 8PSK 
FEC:        AUTO 
Inversion:  AUTO 
Rolloff:    AUTO 
Pilot:      AUTO

although there is an error

FE_GET_PROPERTY failed: Invalid argument
Closing frontend ... 
Disconnect from gpsd ...

I can then process the bb frames and get the eti out of it.

dvbstream -o - 8192 | pts2bbf | bbfedi2eti -dst-ip 239.199.2.1 -dst-port 1234 | dablin_gtk

I don't like dvblast because of the mentioned errors.

Thanks, I tried again with tune-s2 and dvbstream like you suggested. I also modified pts2bbf for PID 280 rather than 270 (it seems like the driver in use is giving the data on pseudo PID 280). I then got data coming out from pts2bbf, but unfortunately it still seems to be corrupted, with bbfedi2eti giving this error multiple times -

EDI: packet is unknown: ..

before stopping with a segmentation fault.

I guess the linux media driver in use is to blame.

andimik commented 1 year ago

@mrwish7

Dear Adam, for me there was no need to modify neither the Linux driver (it uses PID 270 in my case under Linux) nor the software. PID 280 is used in Windows, but the output is corrupt. The following screenshot shows the PID-analysis for the Linux capture:

grafik

You could skip some Pseudo-TS frames before processing with pts2bbf: dd skip=188 (or multiples of 188) as sometimes the header is corrupt. I get the message from time to time, too.

Could you try this file? It's older, but currently I am writing this on the wrong PC. nrk_23nov2020_copy.zip

$ cat nrk_23nov2020_copy.ts | pts2bbf | bbfedi2eti -dst-ip 239.199.2.1 -dst-port 1234 | dablin

@basicmaster

Dear Stefan,

My Enigma2 satellite receiver with OpenATV has recorded PID 8191 as well (and ignored the PIDs 7031 resp. 7131, which carry the DAB ensemble). I was a bit surprised as my 30 min recording was several Gigabytes big ...

grafik grafik

I had to patch the User bouquet and overwrite the PCR entry 8191 by 7031 resp. 7131.

grafik

Only then it works:

grafik grafik

mrwish7 commented 1 year ago

Thanks @andimik

I can confirm that your file works perfectly (nrk_23nov20_copy.ts), but data from my contact's TBS6903X seems to not be working.

Looking at the file in TransEdit (with PID280 confirmed), I can see that a lot of packets are missing -

And I get the following errors with bbfedi2eti -

[01/02/23 21:01:42] EDI: packet is unknown: .y
[01/02/23 21:01:42] EDI: packet is unknown: .T
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: .u
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..
[01/02/23 21:01:42] EDI: packet is unknown: ..

I'm more convinced that this is an issue with the deeptho version of the drivers if the regular TBS ones work just fine. I will have to see if the guy I'm helping can swap over to the regular ones to try instead.

Thanks,

Adam

10720V_TS_dump.zip

andimik commented 1 year ago

Well, one idea is to use GRUB2 and boot into a different (previous) kernel and install the TBS driver there. So he could select which driver he wants (Norwegian DAB with GSE <-> neumo blindscan) at the start.

I have removed some fprint comments from bbfedi2eti and got the following values for your file.

option dst-ipoption dst-portb8 cb e1 9d f3
BBlength:13be
GSE Header:74 6 0
GSELength:406
GSELength:b5f
b8 3f cd 7b 6f
BBlength:f6d
GSE Header:8b 38 22
GSELength:b38
GSELength:264
b8 87 a9 6a 2c
BBlength:d45
GSE Header:ae 48 84
b8 eb af 86 a4
BBlength:10d4
GSE Header:4c 1d 71
GSELength:c1d
b8 5d 78 66 60
BBlength:ccc
GSE Header:a4 c0 e
GSELength:4c0
b8 c5 f7 9d 60
BBlength:13ac
GSE Header:70 28 8c
GSELength:28
GSELength:510
GSELength:daf
b8 91 39 8a d0
BBlength:115a
GSE Header:0 d cd
b8 df ef 71 aa
BBlength:e35
GSE Header:90 0 0
GSELength:0
Segmentation fault (core dumped)

So the crash has to do when the GSE Length is 0, seems it comes from

bool processBBframe(unsigned char* payload, unsigned int gseLength)

in line 110ff and later in line 135. But I'm not a programmer in order to fix that. But in my opinion there is no need for a fix as the input file has to be ok anyway.

For a the above mentioned file https://github.com/piratfm/eti-tools/files/10333539/nrk_23nov2020_copy.zip I get

GSELength:518
GSELength:51b
GSELength:516
GSELength:428
b8 52 ab bc c8
BBlength:1799
GSE Header:60 fb 1f
GSELength:fb
GSELength:51f
GSELength:51b
GSELength:51b
GSELength:51b
GSELength:51b
GSELength:226
b8 52 ab bc c8
BBlength:1799
GSE Header:62 fd 20
GSELength:2fd
GSELength:51f
GSELength:51b
GSELength:51b
GSELength:51b
GSELength:51b
GSELength:24
b8 52 ab bc c8
BBlength:1799
GSE Header:64 ff 21
GSELength:4ff
GSELength:51f
GSELength:51b
GSELength:51b
GSELength:51b
GSELength:33f
b8 52 ab bc c8
BBlength:1799
GSE Header:61 e4 22
GSELength:1e4
GSELength:51f
GSELength:526
GSELength:51b
GSELength:526
GSELength:526
GSELength:11c
b8 52 ab bc c8
BBlength:1799
GSE Header:64 4 23
GSELength:404
GSELength:51c
GSELength:51b
GSELength:518
GSELength:51b
GSELength:43d
b8 52 ab bc c8
BBlength:1799
GSE Header:60 e1 24
GSELength:e1
GSELength:51a
GSELength:51b
GSELength:51b

(which plays in dablin_gtk)

@newspaperman could help here more. But I fear he also will suggest your colleague to use the other driver.

deeptho commented 1 year ago

I'm more convinced that this is an issue with the deeptho version of the drivers if the regular TBS ones work just fine. I will have to see if the guy I'm helping can swap over to the regular ones to try instead.

I have made some changes in the drivers today which might solve the problem. So please try.

deeptho commented 1 year ago

I have recorded a stream with crazyscan under windows. I also cannot make any of the dab programs work on that stream nrk20230107_crazyscan.zip

And here is a linux stream with the neumoDVB drivers (unprocessed data as it comes out of /dev/dvb/adapter1/demux0)

nrk20230107_linux.zip

(I edited the link because previous file was the wrong one)

deeptho commented 1 year ago

neumo drivers have been updated and all of this works now on tbs6903x and tbs6909x

andimik commented 1 year ago

https://www.worlddab.org/events/detail/631#presentations

In Tork's slides there is a hint on page 20 that Australia uses DAB (MPE) feeds, too. As all satellites are below the horizon for us Europeans, I just can say there are (hidden) PIDs on some Optus satellites which are similar to the French solution or have at least a constant bitrate.

mrwish7 commented 1 year ago

Hola gente, desde hace unos días ya no se me oyen las emisoras de Prisa en el satélite Hispasat 30W, me fijo en la señal de la frecuencia 12518 H 1125 y tengo 95 intensidad y 57 de Calidad pero no se me oyen ¿Han cambiado algún parámetro? ¿Lo han Codificado? Abro las urls del dabstreamer que tengo instalado en OpenAtv y se queda en blanco nada más darle al enter cuando antes salían letras raras en el navegador ¿Sabéis cuál puede ser el fallo? Muchas gracias, que pasen un buen día

Hola, acabo de verificarlo y las emisores de la frecuencia 12518 H 1125 siguen marchando como antes, sin problema. Todas son de 128kbps AAC, y necesitan que use mpe2aac para recuparar los flujos audio. Debe ser un problema de la configuración del receptor.

== I've just checked 12518 H 1125 and all of the radios are working as before, without any problem. They're all 128kbps AAC, and require mpe2aac to decode the audio stream. It must be a receiver configuration problem.

MusicaFM commented 1 year ago

Hola gente, desde hace unos días ya no se me oyen las emisoras de Prisa en el satélite Hispasat 30W, me fijo en la señal de la frecuencia 12518 H 1125 y tengo 95 intensidad y 57 de Calidad pero no se me oyen ¿Han cambiado algún parámetro? ¿Lo han Codificado? Abro las urls del dabstreamer que tengo instalado en OpenAtv y se queda en blanco nada más darle al enter cuando antes salían letras raras en el navegador ¿Sabéis cuál puede ser el fallo? Muchas gracias, que pasen un buen día

Hola, acabo de verificarlo y las emisores de la frecuencia 12518 H 1125 siguen marchando como antes, sin problema. Todas son de 128kbps AAC, y necesitan que use mpe2aac para recuparar los flujos audio. Debe ser un problema de la configuración del receptor.

== I've just checked 12518 H 1125 and all of the radios are working as before, without any problem. They're all 128kbps AAC, and require mpe2aac to decode the audio stream. It must be a receiver configuration problem.

Gracias por responder, ya me funciona la emisión Nacional, se me habría borrado al hacer búsqueda automática y no desmarcar "Limpiar antes de buscar" el problemilla ahora es la emisión de Cataluña de la frecuencia 12519 H 718 que a pesar de tener señal y todo con los datos agregado me da señal, pero al reproducir sale el circulo dando vueltas un rato y me da error y en el navegador web se queda cargando y al cavo de un rato se queda en blanco la página ¿Que está ocurriendo en esta ocasión? La configuración la he cogido de EnoSat en esta web https://nowsat.info/foro/viewtopic.php?p=55787#p55787 Gracias por responder 😃 por cierto. ¿Tienes la configuración de Los40 Dance por Hispasat 30W para OpenAtv Enigma2? De nuevo gracias

jpuigs commented 1 year ago

Ensemble from Salisbury at 10º East (11221 V) has changed port number, was on 4000, now 2048. IP unchanged.

musuruan commented 1 year ago

Some regional Italian DAB feeds should be available at 9E 12149V stream 101 and 102: https://www.digital-forum.it/showthread.php?39806-FEED-DTT-di-EIT-RaiWay-Persidera-su-5W-e-9E&p=7717959#post7717959

Unluckily I have no way to check.

andimik commented 1 year ago

No, these are tests so far, but not with an existing ensemble. I will observe and update the list as soon as tests are over.

andimik commented 1 year ago

The tests are ongoing, now both streams contain RADIODIG UMBRIA, but I personally think this still will change as it makes no sense for this duplicate.

andimik commented 12 months ago

According to this PDF https://www.worlddab.org/system/news/documents/000/013/684/original/PR-Paneda_-_2wcom_-_AUCOM_-_KNET_Ghana_Final_2023-09-20.pdf?1695201981 the new DAB mulitplex from/for Ghana 🇬🇭 is on satellite, of course on an African beam, most probably on 28.2 East, I guess on 12645 V, DVB-S2X/16APSK (but I could be wrong).

If someone has found it, please share this information.

[...] has provided a complete audio over IP contribution system, from studio encoders to the centralized multiplexer platform as well as satellite distribution to the DAB transmitters around the country.

Already checked at digitalbitrate.com for normal DVB-S2 transponders on several satellites, but no additional PIDs have been added recently. Therefore, it might be an SCPC signal in DVB-S2 GSE like NRK and Riks from Norway or Bundesmux 1/2 from Germany.

Regarding Saudi Arabia I could not find any press releases and therefore it's unclear if they use IP or satellite link.

andimik commented 10 months ago

Maybe we can expect two more muxes from Nation Broadcasting (🇬🇧) on 10E for Muxcast Hull and Muxcast Southampton in the next months?

See https://www.nationplayer.com/muxcast/

And on 9E the RADIODIG UMBRIA has been switched off some months ago, I forgot to report here. Therefore, the README.md has never been changed luckily ...

jpuigs commented 10 months ago

In Spain, DAB coverage was reduced to only Madrid and Barcelona areas in 2011. This year, some "ilegal", "unofficial", or let's call "unplanned" Muxes have started in some spanish cities, Valencia, Madrid, Barcelona, Murcia, Malaga, Tenerife............ If you look at digitalbitrate.com, the only "legal" DAB muxes are 3 ones from Barcelona and Madrid. (called MF1 MF2 and FU-E). Now, spanish public broadcaster RNE has told that plans to start again in some cities that were working before 2011, and some tests they have been seen in Zaragoza, Pamplona,..... So it's possible that the 3 DAB MUXES appear early next year on Hispasat, hidden inside some Abertis (Cellnex) Transponders............

andimik commented 9 months ago

I found the new forthcoming mux from WDR, which will operate on 9A in Nordrhein-Westfalen (North Rhine-Westphalia).

Because the upper Transponder 12645 MHz V on 23.5°E has been changed to a new symbol rate (2200 kS/s), FEC is 3/4 (= total bitrate is 3.041 MBit/s). No problem if you even use very old DVB-S hardware :-)

There is a PID 3000 carrying the existing 11D and the new 9A. The IP addresses are

228.10.1.5:10010 (for the existing one) and 228.10.2.5:10010 (for the new one)

Bildschirmfoto vom 2023-12-03 13-46-44

$ cat http127.0.0.17000\ 12-03\ 11-45-58.ts | dd if=/dev/stdin skip=188 | fedi2eti 3000 228.10.1.5 10010 | ni2out --list
using pid 3000 ip 228.10.1.5 port 10010
[12/03/23 12:55:14] Initialise next pseq to 16089
[12/03/23 12:55:14] EDI-AF: Packet sequence error
Radio fuer NRW   (0x10ec)
 0 : WDR 5            (0xd395) Pri subch= 4 start=156 CUs= 48 PL=eep-3a bitrate=64 DAB+
 1 : WDR Event        (0xdf96) Pri subch= 6 start=252 CUs= 36 PL=eep-3a bitrate=48 DAB+
 2 : WDR 2 BERG.-LAND (0xdc92) Pri subch=22 start=810 CUs= 54 PL=eep-3a bitrate=72 DAB+
 3 : WDR 2 S�DWESTF   (0xdb92) Pri subch=21 start=756 CUs= 54 PL=eep-3a bitrate=72 DAB+
 4 : WDR 2 M�NSTERL   (0xda92) Pri subch=20 start=702 CUs= 54 PL=eep-3a bitrate=72 DAB+
 5 : WDR 2 AACHEN     (0xd492) Pri subch=19 start=648 CUs= 54 PL=eep-3a bitrate=72 DAB+
 6 : WDR 2 OWL        (0xd592) Pri subch=18 start=594 CUs= 54 PL=eep-3a bitrate=72 DAB+
 7 : WDR 2 RHEIN-RUHR (0xd792) Pri subch=16 start=486 CUs= 54 PL=eep-3a bitrate=72 DAB+
 8 : WDR 2 RUHRGEBIET (0xd692) Pri subch=17 start=540 CUs= 54 PL=eep-3a bitrate=72 DAB+
 9 : WDR Maus         (0xdf95) Pri subch= 2 start= 54 CUs= 48 PL=eep-3a bitrate=64 DAB+
10 : WDRcosmo         (0xd496) Pri subch= 5 start=204 CUs= 48 PL=eep-3a bitrate=64 DAB+
11 : 1LIVE diGGi      (0xdf91) Pri subch= 3 start=102 CUs= 54 PL=eep-3a bitrate=72 DAB+
12 : WDR 4            (0xd394) Pri subch=14 start=360 CUs= 54 PL=eep-3a bitrate=72 DAB+
13 : WDR 2 RHEINLAND  (0xd392) Pri subch= 7 start=288 CUs= 54 PL=eep-3a bitrate=72 DAB+
14 : 1LIVE            (0xd391) Pri subch= 1 start=  0 CUs= 54 PL=eep-3a bitrate=72 DAB+
15 : WDR 3            (0xd393) Pri subch=15 start=414 CUs= 72 PL=eep-3a bitrate=96 DAB+

andreas@E535:/tmp$ cat http127.0.0.17000\ 12-03\ 11-45-58.ts | dd if=/dev/stdin skip=188 | fedi2eti 3000 228.10.2.5 10010 | ni2out --list
using pid 3000 ip 228.10.2.5 port 10010
[12/03/23 12:55:25] Initialise next pseq to 43316
[12/03/23 12:55:25] EDI-AF: Packet sequence error
K9A              (0x1001)
 0 : WDR 4 AACHEN     (0xd494) Pri subch= 6 start=528 CUs= 88 PL=eep-2a bitrate=88 DAB+
 1 : WDR 4 M�NSTER    (0xda94) Pri subch= 8 start=704 CUs= 88 PL=eep-2a bitrate=88 DAB+
 2 : WDR 2 RUHRGEBIET (0xd692) Pri subch= 2 start=176 CUs= 88 PL=eep-2a bitrate=88 DAB+
 3 : WDR 2 RHEINLAND  (0xd392) Pri subch= 1 start= 88 CUs= 88 PL=eep-2a bitrate=88 DAB+
 4 : WDR 4 RUHRGEBIET (0xd694) Pri subch= 0 start=  0 CUs= 88 PL=eep-2a bitrate=88 DAB+
 5 : WDR 2 AACHEN     (0xd492) Pri subch= 3 start=264 CUs= 88 PL=eep-2a bitrate=88 DAB+
 6 : WDR 2 BERG.-LAND (0xdc92) Pri subch= 4 start=352 CUs= 88 PL=eep-2a bitrate=88 DAB+
 7 : WDR 4 K�LN       (0xd394) Pri subch= 7 start=616 CUs= 88 PL=eep-2a bitrate=88 DAB+
 8 : WDR 2 M�NSTERL   (0xda92) Pri subch= 5 start=440 CUs= 88 PL=eep-2a bitrate=88 DAB+

The README.md has been updated, see https://github.com/piratfm/eti-tools/commit/73eee87d84d4e9e0bcb6cf6624e09ccf280643db

Hint: The frequency on 12632V might be switched off soon.

mrwish7 commented 9 months ago

Very good news! The fact that it’s now valid MPEG-TS rather than pseudo TS makes it much easier to lock and decode on a lot more tuners which is very handy,

andimik commented 7 months ago

https://github.com/SatDump/SatDump

Has anyone tried to decode both Bundesmux on 23.5 East with that SDR software? Seems it gets baseband frames (bbframes) out.

jpuigs commented 5 months ago

It seems that WDR 9A MUX at 23.5 East (228.10.2.5) is carrying nothing.

mrwish7 commented 4 months ago

There's a new multiplex on Astra 2 28.2°E 11425H, PID 1065.

For now it's carrying a copy of D1 National as on PID 1062, but the service label is "D1 Scotland", so it looks like they're looking to make use of the fact that D1 has a separate frequency in Scotland (12A) compared to the rest of the UK (11D). I guess we'll see some regional variations soon.

dvbstream -o 1065 | ts2na -p 1065 | na2ni | ni2out --list
WARN:  Forward error correction (FEC) disabled (NOT COMPILED)
INFO:  Using pid: 0x0429 (1065)
dvbstream v0.7.01 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://dvbtools.sourceforge.net/
dvbstream will stop after -1 seconds (71582788 minutes)
Output to stdout
Streaming 2 streams
INFO:  E1 Sync found at bit: 263, inverted: yes
DEBUG: seek: B:32, b:7
DEBUG: pre-readed output 14 frames (31 bytes left):
DEBUG: MULTIFRAME FILLING: 206
INFO:  ETI Sync found at pos: 2
INFO:  ETI Multiframe sync found at blockId: 11
.D1 National      (0xc181)
 0 : talkSPORT        (0xc0c0) Pri subch= 2 start=  0 CUs= 48 PL=uep 3 bitrate=64
 1 : LBC              (0xc0c2) Pri subch=15 start= 48 CUs= 48 PL=uep 3 bitrate=64
 2 : Absolute Radio   (0xc1c0) Pri subch= 3 start= 96 CUs= 58 PL=uep 3 bitrate=80
 3 : KISS             (0xc5c0) Pri subch=10 start=154 CUs= 58 PL=uep 3 bitrate=80
 4 : Magic            (0xc0c6) Pri subch=11 start=212 CUs= 58 PL=uep 3 bitrate=80
 5 : KISSTORY         (0xcfe6) Pri subch=13 start=270 CUs= 58 PL=uep 3 bitrate=80
 6 : Heart UK         (0xcfd1) Pri subch= 5 start=328 CUs= 30 PL=eep-3a bitrate=40 DAB+
 7 : Smooth UK        (0xc6c0) Pri subch= 6 start=358 CUs= 30 PL=eep-3a bitrate=40 DAB+
 8 : Gold UK          (0xcee8) Pri subch= 8 start=388 CUs= 30 PL=eep-3a bitrate=40 DAB+
 9 : Heart Dance      (0xcfe8) Pri subch= 4 start=418 CUs= 30 PL=eep-3a bitrate=40 DAB+
10 : Heart  80s       (0xc1dc) Pri subch=14 start=448 CUs= 30 PL=eep-3a bitrate=40 DAB+
11 : Heart  90s       (0xcbe9) Pri subch=18 start=478 CUs= 30 PL=eep-3a bitrate=40 DAB+
12 : Capital XTRA     (0xc37b) Pri subch=16 start=508 CUs= 30 PL=eep-3a bitrate=40 DAB+
13 : Heart  70s       (0xcae9) Pri subch=19 start=538 CUs= 24 PL=eep-3a bitrate=32 DAB+
14 : Radio X          (0xc4cd) Pri subch=17 start=562 CUs= 30 PL=eep-3a bitrate=40 DAB+
15 : LBC News         (0xc8ea) Pri subch=21 start=592 CUs= 24 PL=eep-3a bitrate=32 DAB+
16 : Capital UK       (0xc5da) Pri subch=22 start=616 CUs= 30 PL=eep-3a bitrate=40 DAB+
17 : Smooth Chill     (0xc9eb) Pri subch=12 start=646 CUs= 24 PL=eep-3a bitrate=32 DAB+
18 : Capital DANCE    (0xc9ed) Pri subch=23 start=670 CUs= 30 PL=eep-3a bitrate=40 DAB+
19 : UCB 1            (0xc4ca) Pri subch= 7 start=700 CUs= 18 PL=eep-3a bitrate=24 DAB+
20 : GB News Radio    (0xc4f0) Pri subch=24 start=718 CUs= 18 PL=eep-3a bitrate=24 DAB+
21 : UCB 2            (0xcbd8) Pri subch= 9 start=736 CUs= 24 PL=eep-3a bitrate=32 DAB+
22 : Heart 00s        (0xc9f3) Pri subch=20 start=760 CUs= 30 PL=eep-3a bitrate=40 DAB+
23 : Classic FM       (0xc2a1) Pri subch=28 start=790 CUs= 48 PL=eep-3a bitrate=64 DAB+
24 : Smooth Relax     (0xc4fb) Pri subch=27 start=838 CUs= 24 PL=eep-3a bitrate=32 DAB+

andimik commented 4 months ago

https://www.digitalbitrate.com/dtv.php?mux=12092&liste=1&live=68&lang=en

It's also on 9E. Seems it has been added long before the signal on 28E.

Will add it later.

mrwish7 commented 4 months ago

There's also a copy of the WDR 23.5°E 12645 V 2200 DVB-S transponder on 19.2°E - 11604 V 2200 (thanks to EnoSat for finding) -

tune-s2 11604 V 2200 -system DVB-S -lnb UNIVERSAL -adapter 1
status Locked | signal -31.8 dBm | snr 15.0 dB | ber 0 | FE_HAS_LOCK
Closing frontend ...

dvbstream -c 1 -o 3000 | fedi2eti 3000 228.10.1.5 10010 | ni2out --list
using pid 3000 ip 228.10.1.5 port 10010
dvbstream v0.7.01 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://dvbtools.sourceforge.net/
dvbstream will stop after -1 seconds (71582788 minutes)
Output to stdout
Streaming 2 streams
[04/21/24 07:16:53] Initialise next pseq to 35191
[04/21/24 07:16:53] EDI-AF: Packet sequence error
Radio fuer NRW   (0x10ec)
 0 : WDR 2 OWL        (0xd592) Pri subch=18 start=594 CUs= 54 PL=eep-3a bitrate=72 DAB+
 1 : WDR 2 RHEIN-RUHR (0xd792) Pri subch=16 start=486 CUs= 54 PL=eep-3a bitrate=72 DAB+
 2 : WDR 2 RUHRGEBIET (0xd692) Pri subch=17 start=540 CUs= 54 PL=eep-3a bitrate=72 DAB+
 3 : WDR Maus         (0xdf95) Pri subch= 2 start= 54 CUs= 48 PL=eep-3a bitrate=64 DAB+
 4 : WDRcosmo         (0xd496) Pri subch= 5 start=204 CUs= 48 PL=eep-3a bitrate=64 DAB+
 5 : 1LIVE diGGi      (0xdf91) Pri subch= 3 start=102 CUs= 54 PL=eep-3a bitrate=72 DAB+
 6 : WDR 4            (0xd394) Pri subch=14 start=360 CUs= 54 PL=eep-3a bitrate=72 DAB+
 7 : WDR 2 RHEINLAND  (0xd392) Pri subch= 7 start=288 CUs= 54 PL=eep-3a bitrate=72 DAB+
 8 : 1LIVE            (0xd391) Pri subch= 1 start=  0 CUs= 54 PL=eep-3a bitrate=72 DAB+
 9 : WDR 3            (0xd393) Pri subch=15 start=414 CUs= 72 PL=eep-3a bitrate=96 DAB+
10 : WDR 5            (0xd395) Pri subch= 4 start=156 CUs= 48 PL=eep-3a bitrate=64 DAB+
11 : WDR Event        (0xdf96) Pri subch= 6 start=252 CUs= 36 PL=eep-3a bitrate=48 DAB+
12 : WDR 2 BERG.-LAND (0xdc92) Pri subch=22 start=810 CUs= 54 PL=eep-3a bitrate=72 DAB+
13 : WDR 2 S�DWESTF   (0xdb92) Pri subch=21 start=756 CUs= 54 PL=eep-3a bitrate=72 DAB+
14 : WDR 2 M�NSTERL   (0xda92) Pri subch=20 start=702 CUs= 54 PL=eep-3a bitrate=72 DAB+
15 : WDR 2 AACHEN     (0xd492) Pri subch=19 start=648 CUs= 54 PL=eep-3a bitrate=72 DAB+

dvbstream -c 1 -o 3000 | fedi2eti 3000 228.10.2.5 10010 | ni2out --list
using pid 3000 ip 228.10.2.5 port 10010
dvbstream v0.7.01 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://dvbtools.sourceforge.net/
dvbstream will stop after -1 seconds (71582788 minutes)
Output to stdout
Streaming 2 streams
[04/21/24 07:18:56] Initialise next pseq to 40317
[04/21/24 07:18:56] EDI-AF: Packet sequence error
K9A              (0x10fa)
 0 : Test 6           (0xd494) Pri subch= 6 start=440 CUs= 88 PL=eep-2a bitrate=88 DAB+
 1 : Test 8           (0xda94) Pri subch= 8 start=616 CUs= 88 PL=eep-2a bitrate=88 DAB+
 2 : Test 2           (0xd692) Pri subch= 2 start= 88 CUs= 88 PL=eep-2a bitrate=88 DAB+
 3 : Test 1           (0xd392) Pri subch= 1 start=  0 CUs= 88 PL=eep-2a bitrate=88 DAB+
 4 : Test 9           (0xd694) Pri subch= 9 start=704 CUs= 88 PL=eep-2a bitrate=88 DAB+
 5 : Test 3           (0xd492) Pri subch= 3 start=176 CUs= 88 PL=eep-2a bitrate=88 DAB+
 6 : Test 4           (0xdc92) Pri subch= 4 start=264 CUs= 88 PL=eep-2a bitrate=88 DAB+
 7 : Test 7           (0xd394) Pri subch= 7 start=528 CUs= 88 PL=eep-2a bitrate=88 DAB+
 8 : Test 5           (0xda92) Pri subch= 5 start=352 CUs= 88 PL=eep-2a bitrate=88 DAB+

andimik commented 4 months ago

Yes, noted, first I thought it was a typo in the frequency, because the WDR Transponder is exactly 1000 MHz higher.

Benedek012 commented 4 months ago

This is 11604V working Enigma 2 Box??????

Benedek012 commented 4 months ago

This is 11604V working Enigma 2 Box??????

andimik commented 4 months ago

I don't understand your question, but I confirm the WDR signal on 19.2E is still on air and must work with even 20 years old DVB-S hardware. Because it is now the only WDR feed, as the old one on 23.5E has been switched off. Remark: Both German Bundesmuxes are still on 23.5E.

Furthermore, RAI has changed its frequency on 5W.

(thanks to all contributors on German Rundfunkforum)

see https://github.com/piratfm/eti-tools/commit/41d621a7f0d468fad64107d0308c6e43b4c957a2

grafik

Benedek012 commented 4 months ago

Astra 19,2E Enigma 2 Box Dab+ 11604V OK?????LamedB and telnet????write enigma 2,,please help,thanks.And Astra -sm config???

Benedek012 commented 4 months ago

This is Telnet,no Enigma 2 formation

Code:

tune-s2 11604 V 2200 -system DVB-S -lnb UNIVERSAL -adapter 1 status Locked | signal -31.8 dBm | snr 15.0 dB | ber 0 | FE_HAS_LOCK Closing frontend ...

Code: dvbstream -c 1 -o 3000 | fedi2eti 3000 228.10.1.5 10010 | ni2out --list using pid 3000 ip 228.10.1.5 port 10010 dvbstream v0.7.01 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://dvbtools.sourceforge.net/ dvbstream will stop after -1 seconds (71582788 minutes) Output to stdout Streaming 2 streams [04/21/24 07:16:53] Initialise next pseq to 35191 [04/21/24 07:16:53] EDI-AF: Packet sequence error Radio fuer NRW (0x10ec) 0 : WDR 2 OWL (0xd592) Pri subch=18 start=594 CUs= 54 PL=eep-3a bitrate=72 DAB+ 1 : WDR 2 RHEIN-RUHR (0xd792) Pri subch=16 start=486 CUs= 54 PL=eep-3a bitrate=72 DAB+ 2 : WDR 2 RUHRGEBIET (0xd692) Pri subch=17 start=540 CUs= 54 PL=eep-3a bitrate=72 DAB+ 3 : WDR Maus (0xdf95) Pri subch= 2 start= 54 CUs= 48 PL=eep-3a bitrate=64 DAB+ 4 : WDRcosmo (0xd496) Pri subch= 5 start=204 CUs= 48 PL=eep-3a bitrate=64 DAB+ 5 : 1LIVE diGGi (0xdf91) Pri subch= 3 start=102 CUs= 54 PL=eep-3a bitrate=72 DAB+ 6 : WDR 4 (0xd394) Pri subch=14 start=360 CUs= 54 PL=eep-3a bitrate=72 DAB+ 7 : WDR 2 RHEINLAND (0xd392) Pri subch= 7 start=288 CUs= 54 PL=eep-3a bitrate=72 DAB+ 8 : 1LIVE (0xd391) Pri subch= 1 start= 0 CUs= 54 PL=eep-3a bitrate=72 DAB+ 9 : WDR 3 (0xd393) Pri subch=15 start=414 CUs= 72 PL=eep-3a bitrate=96 DAB+ 10 : WDR 5 (0xd395) Pri subch= 4 start=156 CUs= 48 PL=eep-3a bitrate=64 DAB+ 11 : WDR Event (0xdf96) Pri subch= 6 start=252 CUs= 36 PL=eep-3a bitrate=48 DAB+ 12 : WDR 2 BERG.-LAND (0xdc92) Pri subch=22 start=810 CUs= 54 PL=eep-3a bitrate=72 DAB+ 13 : WDR 2 S�DWESTF (0xdb92) Pri subch=21 start=756 CUs= 54 PL=eep-3a bitrate=72 DAB+ 14 : WDR 2 M�NSTERL (0xda92) Pri subch=20 start=702 CUs= 54 PL=eep-3a bitrate=72 DAB+ 15 : WDR 2 AACHEN (0xd492) Pri subch=19 start=648 CUs= 54 PL=eep-3a bitrate=72 DAB+

Benedek012 commented 4 months ago

This is Telnet,no Enigma 2 formation

Code:

tune-s2 11604 V 2200 -system DVB-S -lnb UNIVERSAL -adapter 1 status Locked | signal -31.8 dBm | snr 15.0 dB | ber 0 | FE_HAS_LOCK Closing frontend ...

Code: dvbstream -c 1 -o 3000 | fedi2eti 3000 228.10.1.5 10010 | ni2out --list using pid 3000 ip 228.10.1.5 port 10010 dvbstream v0.7.01 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://dvbtools.sourceforge.net/ dvbstream will stop after -1 seconds (71582788 minutes) Output to stdout Streaming 2 streams [04/21/24 07:16:53] Initialise next pseq to 35191 [04/21/24 07:16:53] EDI-AF: Packet sequence error Radio fuer NRW (0x10ec) 0 : WDR 2 OWL (0xd592) Pri subch=18 start=594 CUs= 54 PL=eep-3a bitrate=72 DAB+ 1 : WDR 2 RHEIN-RUHR (0xd792) Pri subch=16 start=486 CUs= 54 PL=eep-3a bitrate=72 DAB+ 2 : WDR 2 RUHRGEBIET (0xd692) Pri subch=17 start=540 CUs= 54 PL=eep-3a bitrate=72 DAB+ 3 : WDR Maus (0xdf95) Pri subch= 2 start= 54 CUs= 48 PL=eep-3a bitrate=64 DAB+ 4 : WDRcosmo (0xd496) Pri subch= 5 start=204 CUs= 48 PL=eep-3a bitrate=64 DAB+ 5 : 1LIVE diGGi (0xdf91) Pri subch= 3 start=102 CUs= 54 PL=eep-3a bitrate=72 DAB+ 6 : WDR 4 (0xd394) Pri subch=14 start=360 CUs= 54 PL=eep-3a bitrate=72 DAB+ 7 : WDR 2 RHEINLAND (0xd392) Pri subch= 7 start=288 CUs= 54 PL=eep-3a bitrate=72 DAB+ 8 : 1LIVE (0xd391) Pri subch= 1 start= 0 CUs= 54 PL=eep-3a bitrate=72 DAB+ 9 : WDR 3 (0xd393) Pri subch=15 start=414 CUs= 72 PL=eep-3a bitrate=96 DAB+ 10 : WDR 5 (0xd395) Pri subch= 4 start=156 CUs= 48 PL=eep-3a bitrate=64 DAB+ 11 : WDR Event (0xdf96) Pri subch= 6 start=252 CUs= 36 PL=eep-3a bitrate=48 DAB+ 12 : WDR 2 BERG.-LAND (0xdc92) Pri subch=22 start=810 CUs= 54 PL=eep-3a bitrate=72 DAB+ 13 : WDR 2 S�DWESTF (0xdb92) Pri subch=21 start=756 CUs= 54 PL=eep-3a bitrate=72 DAB+ 14 : WDR 2 M�NSTERL (0xda92) Pri subch=20 start=702 CUs= 54 PL=eep-3a bitrate=72 DAB+ 15 : WDR 2 AACHEN (0xd492) Pri subch=19 start=648 CUs= 54 PL=eep-3a bitrate=72 DAB+

piratfm / eti-tools

Satellite sources of DAB feeds - part 3 #35

Summary of closed issue #28 (= Satellite sources of DAB feeds - part 2)