plottertools / hatched

Convert images to plotter-friendly hatched patterns
MIT License
99 stars 9 forks source link
generative-art hacktoberfest pen-plotter plotter-art

hatched

Library and vpype plug-in to convert images to plotter-friendly, hatched patterns.

Built with OpenCV, scikit-image, Shapely, matplotlib and svgwrite. You can reach the author Drawingbots's Discord server.

Getting Started

Using with vpype

Using hatched as a vpype plug-in is the easiest way to get started. See vpype's installation instructions for information on how to install vpype.

If vpype was installed using pipx, use the following command:

$ pipx inject vpype hatched

If vpype was installed using pip in a virtual environment, activate the virtual environment and use the following command:

$ pip install hatched

You can confirm that the installation was successful with the following command, which also happens to tell you all you need to know to use hatched:

$ vpype hatched --help
Usage: vpype hatched [OPTIONS] FILENAME

  Generate hatched pattern from an image.

  The hatches generated are in the coordinate of the input image. For
  example, a 100x100px image with generate hatches whose bounding box
  coordinates are (0, 0, 100, 100). The `--scale` option, by resampling the
  input image, indirectly affects the generated bounding box. The `--pitch`
  parameter sets the densest hatching frequency,

Options:
  --levels INTEGER...             Pixel value of the 3 thresholds between
                                  black, dark, light and white zones (0-255).
  -s, --scale FLOAT               Scale factor to apply to the image size.
  -i, --interpolation [linear|nearest]
                                  Interpolation used for scaling.
  -b, --blur INTEGER              Blur radius to apply to the image before
                                  applying thresholds.
  -p, --pitch LENGTH              Hatching pitch for the densest zones. This
                                  option understands supported units.
  -x, --invert                    Invert the image (and levels) before
                                  applying thresholds.
  -c, --circular                  Use circular instead of diagonal hatches.
  -o, --center                    Origin of circles relative to the image size.
                                  For example, (0.5, 0.5) corresponds to the 
                                  center of the image.
  -a, --angle                     Angle for diagonal hatches (in degrees)
  -d, --show-plot                 Display the contours and resulting pattern
                                  using matplotlib.
  -l, --layer LAYER               Target layer or 'new'.
  --help                          Show this message and exit.

To create a SVG, combine the hatched command with the write command (check vpype's documentation for more information). Here is an example:

$ vpype hatched --levels 64 128 192 -s 0.5 -p 4 input.jpg layout a4 write output.svg

Using hatched as a library

To play with hatched, you need to checkout the source and install the dependencies in a virtual environment, for example with the following steps:

$ git clone https://github.com/plottertools/hatched.git
$ cd hatched
$ python3 -m venv venv
$ source venv/bin/activate
$ pip install -r dev-requirements.txt

Running the example

Example can then be run by executing the corresponding file:

$ cd examples
$ python skull.py

The processing result is displayed in a matplotlib window:

image

A skull.svg file is also created with the output graphics.

Usage

Call the function hatched.hatch() to process your image. It takes the following parameters:

License

This project is licensed under the MIT License - see the LICENSE file for details.

The example image skull.jpg is licenced under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License