CoreMark RP2040❤️

This is the COREMARK® embedded benchmark ported for the RP2040 chip from the folks over at Raspberry Pi.

How to Use

Ensure that the Pico C/C++ SDK environment variables are set properly and you have cmake installed.

For Linux check here:

For Windows, the setup files can be found here:

For Microsoft Windows

Add the PICO_INSTALL_PATH to User Environment Variables.

For example, if you have installed the SDK in "C:\Program Files\Raspberry Pi\Pico SDK v1.5.1" then add PICO_INSTALL_PATH as C:\Program Files\Raspberry Pi\Pico SDK v1.5.1 to User Environment Variables.

Then run the following commands in CMD in the project directory.

scripts/setup_env.bat

You can use the following command to clean the project directory.

make clean || ./scripts/clean.bat

You can use the following command to build the project.

make all || cmake . && ninja build

The useful files will be in the artifacts_to_upload directory.

For Linux

make all

The useful files will be in the artifacts_to_upload directory.

Copy the Coremark-RP2040.uf2 file to the RP2040 board.

Open a Serial Monitor at 115200 baud (or just maximum USB speed)

IMPORTANT: Press any key to start single core benchmark.

RELEASES

TODO

• Add multi-core support to the benchmark.