prusa3d MM-control-2.0 issues - Githubissues

prusa3d / MM-control-2.0

Multi Material 2.0 PCB board

Other

36 stars 18 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Motor Sync

#17 gdville opened 3 years ago
0
Schematic for rev 0.4 and later?

#16 Redferne closed 3 years ago
1
Design error on +5V net

#15 HenrikBork closed 2 months ago
39
Feature Request: Add LCD and Pass Selftest for Multi-Material Upgrade

#14 bbeller123 opened 3 years ago
1
Cables

#13 ThomasLGauthier opened 4 years ago
1
C60 can cause timing issues

#12 NielschB opened 4 years ago
15
mmu2 stepper are always powered up

#11 sylphio closed 5 years ago
1
noise in idle, homing problems, led flickering HW 0.3

#10 SNDR0 opened 5 years ago
4
Where is the MMU2 source code?

#9 YoungR0se opened 5 years ago
1
Missing comments about number of axis and LEDs

#8 KarlZeilhofer opened 5 years ago
1
TODO: button expansion connector

#7 KarlZeilhofer opened 5 years ago
2
TODO: pullup resistors for external I2C connector

#6 KarlZeilhofer opened 5 years ago
1
ERC Errors should be cleaned up

#5 KarlZeilhofer opened 5 years ago
1
Signal directions of global labels should be corrected

#4 KarlZeilhofer opened 5 years ago
1
100nF for VCC of MCU

#3 KarlZeilhofer opened 5 years ago
2
The orentation of the sockets should be turned by 180°

#2 KarlZeilhofer opened 5 years ago
3
kiCAD files do not reflect actual MMU2 production board.

#1 CacikeOtoao closed 5 years ago
6