Everything is working perfectly, after a lot of time, stress and testing, as with all hackintoshes.
You need to manually fill in the PlatformInfo values as I can't share my working serial, follow this guide and iServices should work fine. Use ProperTree to edit the config.plist file.
Notes
You may need to change certain values, quirks, patches and kexts. Always use ProperTree to make sure your config.plist is matching what you have on your EFI folder.
If you have more than 1 NVME SSD installed, the macOS installer won't boot. I had to manually remove the one I use for Windows for the installation process, after it's installed it works fine.
If you don't have a incompatible dGPU or plan to use your compatible dGPU, remove -wenoegpu from your boot-args.
If you are installing macOS, I suggest you leave the Misc -> Debug values and boot-args as it is, as it will help you with troubleshooting.
When you have macOS fully installed and working, I suggest you remove -igfxvesa from your boot-args to enable full acceleration on your iGPU. Also follow the Post-Install Guide to disable debugging properties and verbose boot.
