search

pvvx / TLSRPGM

TLSR SWire programmer
Other
49 stars 5 forks source link

readme

TLSRPGM

TLSR SWire programmer

** Option 1: Use TB-04-KIT or TB-04 / 03F module (TLSR8253 chip) and USB-COM (PL2303HX or CH340 chip).

Pin PD3 (OUT) --> RESET, Pin PD4 (SWM) <-> SWS, Pin PB4 (OUT) --> Power (max 16 mA)

TB-03F-KIT-TLSRPGM.png

** Option 2: Use EBYTE E104-BT10-G / N module or (TLSR8269 chip) for direct USB connection

Pin PB1 (OUT) --> RESET, Pin PA7 (SWM) <-> SWS, Pin PB4 (OUT) --> Power

The current version of the 'TlsrPgm.py' program is tested with chips only: TLSR8251, TLSR8253, TLSR8258, TLSR8266, TLSR8269. The firmware for the module works with all types of TLSR82xx chips via SWM-SWS connection.

  1. How to write TLSRPGM program to TB-03F-KIT or TB-04-KIT.
  2. TLSRPGM Usage Examples:

Info:

Options: wsl /usr/bin/python3 TlsrPgm.py


usage: TlsrPgm [-h] [-p PORT] [-b BAUD] [-t TRST] [-a ACT] [-z ZW] [-s] [-c]
[-r] [-g] [-m] [-w] [-u]
{rf,we,wf,es,ea,fsr,fsw,rs,ws,ra,wa,i,ds,df,da,dc} ...

TLSR82xx TlsrPgm version 29.10.23

positional arguments: {rf,we,wf,es,ea,fsr,fsw,rs,ws,ra,wa,i,ds,df,da,dc} Run TlsrPgm {command} -h for additional help rf Read Flash to binary file we Write file to Flash with sectors erases wf Write file to Flash without sectors erases es Erase Region (sectors) of Flash ea Erase All Flash fsr Read Flash Status Register fsw Write Flash Status Register rs Read SWire address to binary file ws Write file to Swire addres ra Read Analog Registers to binary file wa Write file to Analog Registers i External Chip Information ds Dump Swire (Registers or SRAM) df Dump Flash da Dump Analog Registers dc Show uit32 register or SRAM addres

options: -h, --help show this help message and exit -p PORT, --port PORT Serial port device (default: COM1) -b BAUD, --baud BAUD UART Baud Rate (default: 230400) -t TRST, --trst TRST Hard Reset Time ms (default: 0 ms) -a ACT, --act ACT Activation Time ms (0-off, default: 0 ms) -z ZW, --zw ZW Wait Start CPU (default: 0 sec) (before main processing) -s, --stopcpu CPU Stop (before main processing) -c, --cpustall CPU Stall (before main processing) -r, --run CPU Run (post main processing) -g, --go CPU Go (post main processing) -m, --mrst Soft Reset (MCU Reboot) (post main processing) -w, --wrktime Show Worked Time -u, --u2b Use 2 bytes swire address (TLSR826x)


#### Samples:
> **Chip info:** wsl /usr/bin/python3 TlsrPgm.py -s -p/dev/ttyS3 i

======================================================= TLSR825x TlsrPgm version 25.11.20

Open /dev/ttyS3, 230400 bit/s... ok PGM: ChipID: 0x5562 (TLSR825x), ver: 0.0.0.1 swdiv 5, addrlen 3, swbuf [5a 00 06 02 00 05], pwr On SWire bit rate: 0.9600 Mbits/s === PreProcess ======================================== CPU Stop... ok === Process =========================================== Chip ID: 0x5562, rev: 0x02 CPU PC=0x000000 ([0x0602] = 0x05) Flash JEDEC ID: 0xC86013, Size: 512 kbytes

FLASH UID: 000000: 41 50 32 31 36 39 33 01 00 40 00 f1 fe e5 ff ff 000010: c8 01 ff ff ff ff ff ff ff ff ff ff ff ff ff ff

FLASH: 000000: 26 80 00 00 00 00 5d 02 4b 4e 4c 54 30 04 88 00 000010: ae 80 00 00 00 00 00 00 a4 4f 01 00 00 00 00 00

ANALOG REGISTERS: 000000: 48 4c a4 4f 48 02 ff 1d 05 00 00 7b c4 80 00 00 000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 000020: 54 00 00 00 00 00 00 00 00 00 00 2e 1f 15 00 00 000030: 20 20 80 80 07 20 00 00 00 ff 00 00 00 00 00 00 000040: 39 29 aa 00 80 00 00 00 00 00 00 00 ff ff ff 0f 000050: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 000080: 48 4c a4 4f 48 02 ff 1d 05 00 00 7b c4 80 00 00 000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 0000a0: 54 00 00 00 00 00 00 00 00 00 00 2e 1f 15 00 00 0000b0: 20 20 80 80 07 20 00 00 00 ff 00 00 00 00 00 00 0000c0: 62 29 aa 00 80 00 00 00 00 00 00 00 ff ff ff 0f 0000d0: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01

REGISTERS: 000060: 7c f7 c7 83 08 30 06 00 02 00 02 00 01 02 1f 00 000070: 00 04 00 04 00 00 00 00 00 00 00 64 00 02 62 55 


> **Read Full Flash:** TlsrPgm.py -w -t 1 -a 20 -c -pCOM3 -b3000000 rf 0 0x80000 ff_512k.bin

======================================================= TLSR825x TlsrPgm version 25.11.20

Open COM3, 230400 bit/s... ok PGM: ChipID: 0x5562 (TLSR825x), ver: 0.0.0.1 swdiv 5, addrlen 3, swbuf [5a 00 06 02 00 05], pwr On SWire bit rate: 0.9600 Mbits/s Set Speed UART PGM board 3000000 bits/s... ok ReOpen COM3, 3000000 bit/s... ok === PreProcess ======================================== Hard reset Ext.MCU 5 ms... ok Activate 20 ms... ok CPU PC=0x000000 CPU Stall... ok === Process =========================================== Outfile: ff_512k.bin Read Flash from 0x000000 to 0x080000...

Worked Time: 11.305 sec