To automatically deploy the results of building and checking, we need to:
[ X] Do the building and checking using Github actions. Right now GHA is used only for pkgdown
[ ] Add an additional step that moves the completed hySpc.read.Witec_xxx.tar.gz over to hySpc.pkgs I've researched this some, here's a few resources I've found:
https://stackoverflow.com/a/59455293/633251 Looks like it might be the simplest approach but some details are not clear to me, and must be tested in situ. Be sure to read the comments on this answer.
eoduniyi
commented
4 years ago
To automatically deploy the results of building and checking, we need to:
[ X] Do the building and checking using Github actions. Right now GHA is used only for
pkgdown[ ] Add an additional step that moves the completed
hySpc.read.Witec_xxx.tar.gzover tohySpc.pkgsI've researched this some, here's a few resources I've found:https://stackoverflow.com/a/59455293/633251 Looks like it might be the simplest approach but some details are not clear to me, and must be tested in situ. Be sure to read the comments on this answer.
https://github.com/andstor/copycat-action
https://github.com/marketplace/actions/copy-via-ssh (since we are copying between repos that we own I don't think it needs to be this complicated).