default.items
Number TS_Room "Temperature Room [%.1f °C]"(Temperatur) { mqtt="<[mo:/broadlink/xxxxxx34ea34/room_temp:state:JS(number.js)]" } Number TS_Room_Set "Setpoint Room [%.1f °C]" (Temperatur) { mqtt="<[mo:/broadlink/xxxxxx34ea34/thermostat_temp:state:JS(number.js)], >[mo:/broadlink/xxxxxx34ea34/cmd/set_temp:command:*:default]"} Switch TS_Room_Activ "Room is heating" (Temperatur) { mqtt="<[mo:/broadlink/xxxxxx34ea34/active:state:MAP(active.map)"} Switch TS_Room_Mode "Room Auto-Mode (ON/OFF)" (Temperatur) { mqtt="<[mo:/broadlink/xxxxxx34ea34/auto_mode:state:MAP(active.map)], >[mo:/broadlink/xxxxxx34ea34/cmd/set_mode:command:*:MAP(active.map)]"} Switch TS_Room_Power "Room Power (ON/OFF)" (Temperatur) { mqtt="<[mo:/broadlink/xxxxxx34ea34/power:state:MAP(active.map)], >[mo:/broadlink/xxxxxx34ea34/cmd/set_power:command:*:MAP(active.map)]"}
default.sitemap
Text item=TS_Room labelcolor=[TS_Room_Activ==ON="red"] valuecolor=[>22="orange",>17="green",>5="blue"] Setpoint item=TS_Room_Set minValue=5 maxValue=35 step=1 Switch item=TS_Room_Activ Switch item=TS_Room_Mode Switch item=TS_Room_Power
default.rule
rule "heat_autm_on_TS_Room_Set" when Time cron "0 0 6 ? * MON-FRI *" or Time cron "0 0 9 ? * SAT-SUN *" or Time cron "0 30 18 ? * MON-FRI *" or Time cron "0 30 18 ? * SAT-SUN *" then TS_Room_Set.sendCommand(22) end rule "heat_autm_off_TS_Room_Set" when Time cron "0 30 7 ? * MON-FRI *" or Time cron "0 30 10 ? * SAT-SUN *" or Time cron "0 0 20 ? * MON-FRI *" or Time cron "0 0 21 ? * SAT-SUN *" then TS_Room_Set.sendCommand(19) end
number.js
result = parseFloat(input.trim()).toFixed(2);
active.map
0=OFF 1=ON OFF=0 ON=1 -=unknown
read from mqtt
mosquitto_sub -v -h mqtt -t '/broadlink/#' /broadlink/xxxxxx34ea34/dayofweek 1 /broadlink/xxxxxx34ea34/remote_lock 0 /broadlink/xxxxxx34ea34/osv 42 /broadlink/xxxxxx34ea34/sec 36 /broadlink/xxxxxx34ea34/external_temp 0.0 /broadlink/xxxxxx34ea34/fre 0 /broadlink/xxxxxx34ea34/min 56 /broadlink/xxxxxx34ea34/unknown 0 /broadlink/xxxxxx34ea34/sensor 0 /broadlink/xxxxxx34ea34/loop_mode 1 /broadlink/xxxxxx34ea34/room_temp 14.5 /broadlink/xxxxxx34ea34/power 1 /broadlink/xxxxxx34ea34/thermostat_temp 5.0 /broadlink/xxxxxx34ea34/temp_manual 0 /broadlink/xxxxxx34ea34/room_temp_adj 0.0 /broadlink/xxxxxx34ea34/active 0 /broadlink/xxxxxx34ea34/poweron 0 /broadlink/xxxxxx34ea34/auto_mode 0 /broadlink/xxxxxx34ea34/svl 5 /broadlink/xxxxxx34ea34/hour 22 /broadlink/xxxxxx34ea34/svh 35 /broadlink/xxxxxx34ea34/dif 2 /broadlink/xxxxxx34ea34/schedule [[{"start_hour": 6, "temp": 20.0, "start_minute": 0}, {"start_hour": 8, "temp": 15.0, "start_minute": 0}, {"start_hour": 11, "temp": 15.0, "start_minute": 30}, {"start_hour": 12, "temp": 15.0, "start_minute": 30}, {"start_hour": 17, "temp": 22.0, "start_minute": 0}, {"start_hour": 22, "temp": 15.0, "start_minute": 0}], [{"start_hour": 8, "temp": 22.0, "start_minute": 0}, {"start_hour": 23, "temp": 15.0, "start_minute": 0}]]
set temperature for manual mode (also activates manual mode if currently in automatic)
mosquitto_pub -h 192.168.1.9 -t /broadlink/xxxxxx34ea34/cmd/set_temp -m '22'
set auto_mode = 1 for auto (scheduled/timed) mode, 0 for manual mode.
mosquitto_pub -h 192.168.1.9 -t /broadlink/xxxxxx34ea34/cmd/set_mode -m '0'
set device on(1) or off(0), does not deactivate Wifi connectivity
mosquitto_pub -h 192.168.1.9 -t /broadlink/xxxxxx34ea34/cmd/set_power -m '1'
set timer schedule, format is the same as you get from mosquitto_sub.
mosquitto_pub -h mqtt -t /broadlink/xxxxxx34ea34/cmd/set_schedule -m '[[{"start_hour": 6, "temp": 20.0, "start_minute": 0}, {"start_hour": 8, "temp": 15.0, "start_minute": 0}, {"start_hour": 11, "temp": 15.0, "start_minute": 30}, {"start_hour": 12, "temp": 15.0, "start_minute": 30}, {"start_hour": 17, "temp": 22.0, "start_minute": 0}, {"start_hour": 22, "temp": 15.0, "start_minute": 0}], [{"start_hour": 8, "temp": 22.0, "start_minute": 0}, {"start_hour": 23, "temp": 15.0, "start_minute": 0}]]'