search

rashevskyv / dbi

Author is duckbill
2.13k stars 91 forks source link

MTP Responder not working #294

Closed MrSigmaa closed 9 months ago

MrSigmaa commented 10 months ago

Hello all,

I have my switch connected to my PC and when I run MTP responder in DBI, my switch does not show up on my PC

muxi1 commented 10 months ago

MTP Responder works! Check your USB cable.

MrSigmaa commented 10 months ago

I’ve purchased a new able from Amazon, that goes from the C port to the switch. Do I need a chord that does from the USB C port to switch? Because I tried that as well but it did not work. How can I check the usb?

From: muxi1 @.> Sent: Saturday, November 11, 2023 2:26:52 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

MTP Responder works! Check your USB cable.

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1806730431, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYKOZDLGKBYD2JKOIBLYD4SDZAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWG4ZTANBTGE. You are receiving this because you authored the thread.Message ID: @.***>

muxi1 commented 10 months ago

How can I check the usb?

You can check the USB cable/port via Hekate's UMS. If no access to the SD card is possible, there is probably a defect! Consequently, no transfer via the MTP responder will work.

MrSigmaa commented 10 months ago

How can I check the usb?

You can check the USB cable/port via Hekate's UMS. If no access to the SD card is possible, there is probably a defect! Consequently, no transfer via the MTP responder will work.

The USB Tool is working fine using Hekate. It opens on my computer perfectly.

muxi1 commented 10 months ago

The USB Tool is working fine using Hekate. It opens on my computer perfectly.

Then MTP Responder must also work. I can only say that I was able to carry out numerous installations using MTP Responder under version 628 without any problems.

MrSigmaa commented 10 months ago

When I choose MTP, my switch says “waiting for dbibackend to be run”

From: muxi1 @.> Sent: Saturday, November 11, 2023 12:09:03 PM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

The USB Tool is working fine using Hekate. It opens on my computer perfectly.

Then MTP Responder must also work. I can only say that I was able to carry out numerous installations using MTP Responder under version 628 without any problems.

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1806867618, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYPAIC4UAOUDOWJ6YJDYD6WK7AVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHA3DONRRHA. You are receiving this because you authored the thread.Message ID: @.***>

muxi1 commented 10 months ago

The option "Run MTP responder" has nothing to do with DBIbackend and is not required for it.

MrSigmaa commented 10 months ago

Why does it say that when chosen?

From: muxi1 @.> Sent: Saturday, November 11, 2023 12:26:35 PM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

The option "Run MTP responder" has nothing to do with DBIbackend.

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1806871213, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYPOPBR2JWBNXQQRM4DYD6YMXAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHA3TCMRRGM. You are receiving this because you authored the thread.Message ID: @.***>

mourisso commented 10 months ago

are you on a mac? I think it should requere an android file manager for it to work on mac

MrSigmaa commented 10 months ago

No windows

From: Mauricio Borges @.> Sent: Saturday, November 11, 2023 12:41:53 PM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

are you on a mac? I think it should requere an android file manager for it to work on mac

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1806874892, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYLMEW23XANEWILOZS3YD62GDAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHA3TIOBZGI. You are receiving this because you authored the thread.Message ID: @.***>

muxi1 commented 10 months ago

Please check whether the required driver is installed! See here: https://github.com/rashevskyv/dbi/issues/291#issuecomment-1807105725

MrSigmaa commented 10 months ago

I installed those but the same message still shows on my switch “waiting for dbibackend to be run”

From: muxi1 @.> Sent: Sunday, November 12, 2023 7:16:00 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

Please check whether the required driver is installed! See here:

291 (comment)https://github.com/rashevskyv/dbi/issues/291#issuecomment-1807105725

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1807109387, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYLFJLQGEUDPO3N6PXDYEC4YBAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYDSMZYG4. You are receiving this because you authored the thread.Message ID: @.***>

rashevskyv commented 10 months ago

So run mtp responder, not dbibackend installer 🙄

нд, 12 лист. 2023 р., 14:39 користувач Sigma @.***> пише:

I installed those but the same message still shows on my switch “waiting for dbibackend to be run”

From: muxi1 @.> Sent: Sunday, November 12, 2023 7:16:00 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

Please check whether the required driver is installed! See here:

291 (comment)<

https://github.com/rashevskyv/dbi/issues/291#issuecomment-1807105725>

— Reply to this email directly, view it on GitHub< https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807109387>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AMQ6NYLFJLQGEUDPO3N6PXDYEC4YBAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYDSMZYG4>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807115204, or unsubscribe https://github.com/notifications/unsubscribe-auth/AELSODIH6S5P7EJSGC7KBFTYEC7RNAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTKMRQGQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

MrSigmaa commented 10 months ago

I did but that message still shows up.

From: xHR @.> Sent: Sunday, November 12, 2023 7:53:09 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

So run mtp responder, not dbibackend installer 🙄

нд, 12 лист. 2023 р., 14:39 користувач Sigma @.***> пише:

I installed those but the same message still shows on my switch “waiting for dbibackend to be run”

From: muxi1 @.> Sent: Sunday, November 12, 2023 7:16:00 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

Please check whether the required driver is installed! See here:

291 (comment)<

https://github.com/rashevskyv/dbi/issues/291#issuecomment-1807105725>

— Reply to this email directly, view it on GitHub< https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807109387>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AMQ6NYLFJLQGEUDPO3N6PXDYEC4YBAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYDSMZYG4>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807115204, or unsubscribe https://github.com/notifications/unsubscribe-auth/AELSODIH6S5P7EJSGC7KBFTYEC7RNAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTKMRQGQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHubhttps://github.com/rashevskyv/dbi/issues/294#issuecomment-1807119013, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMQ6NYKM6JVXH5T37NOK5KTYEDBDLAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTSMBRGM. You are receiving this because you authored the thread.Message ID: @.***>

rashevskyv commented 10 months ago

It cannot. Prove it with video

нд, 12 лист. 2023 р., 14:54 користувач Sigma @.***> пише:

I did but that message still shows up.

From: xHR @.> Sent: Sunday, November 12, 2023 7:53:09 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

So run mtp responder, not dbibackend installer 🙄

нд, 12 лист. 2023 р., 14:39 користувач Sigma @.***> пише:

I installed those but the same message still shows on my switch “waiting for dbibackend to be run”

From: muxi1 @.> Sent: Sunday, November 12, 2023 7:16:00 AM To: rashevskyv/dbi @.> Cc: Sigma @.>; Author @.> Subject: Re: [rashevskyv/dbi] MTP Responder not working (Issue #294)

Please check whether the required driver is installed! See here:

291 (comment)<

https://github.com/rashevskyv/dbi/issues/291#issuecomment-1807105725>

— Reply to this email directly, view it on GitHub< https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807109387>, or unsubscribe<

https://github.com/notifications/unsubscribe-auth/AMQ6NYLFJLQGEUDPO3N6PXDYEC4YBAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYDSMZYG4>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807115204, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AELSODIH6S5P7EJSGC7KBFTYEC7RNAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTKMRQGQ>

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub< https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807119013>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AMQ6NYKM6JVXH5T37NOK5KTYEDBDLAVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTSMBRGM>.

You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/rashevskyv/dbi/issues/294#issuecomment-1807119360, or unsubscribe https://github.com/notifications/unsubscribe-auth/AELSODMLDEY72EB6DKWSC2DYEDBI5AVCNFSM6AAAAAA7G3E5M2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGEYTSMZWGA . You are receiving this because you commented.Message ID: @.***>