ratgdo mqtt-ratgdo issues

ratgdo / mqtt-ratgdo

ratgdo via mqtt

GNU General Public License v2.0

85 stars 20 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

No Lock Entities in Homeassisant with Board 2.5/V2.56

#44 restauffer closed 11 months ago
2
Sec+ 1.0 ratgdov v2.56 door status not reported

#43 sangdrax8 closed 11 months ago
2
Suggestion: Door open and close could possibly be more accurate after door is stopped

#42 p-jean opened 11 months ago
5
motion is detected but never clear & messes up light

#41 sejgit closed 11 months ago
3
Unable to flash ratgdo_esp8266_hV25_sV2.56 on v2.5 hardware (MQTT) currently running v2.51

#40 edasque closed 11 months ago
1
Chamberlain 9200 GDO (Red button) - Only Obstruction sensor works

#39 Spiral1401 closed 11 months ago
1
Can bins be posted to the releases page?

#38 jerrm closed 11 months ago
5
Very sporadic response to door commands

#37 sjhill01 closed 11 months ago
2
Light activity triggered by motion sensor not detected/reported

#36 untergeek opened 11 months ago
0
Another Sec+ 1.0 Wall panel (041A6318) apparently not compatible

#35 FrankJaco opened 11 months ago
15
Ratgdo random door open events. (MQTT, S+ 1.0)

#34 preppietechie closed 11 months ago
5
secplus 1 GDO can be unreliable if power cycled with RATGDO (Issue #18)

#33 p-jean closed 10 months ago
14
My GDO Light behavior and status is inverted

#32 untergeek closed 11 months ago
3
Reed switches

#31 gshepperd closed 11 months ago
2
Support for Chamberlain B4505T

#30 falconindy closed 11 months ago
4
No MQTT and no web UI after initial configuration

#29 jpsutton opened 11 months ago
26
Sec+1 hangs/crashes every time i try to open/close the door

#28 JeffSteinbok closed 11 months ago
6
Security 1.0 - Opening automatically after power outage

#27 PK7622 closed 11 months ago
5
Issues Wiring 3 Terminal Security 1.0 GDO (41A5021-2)

#26 urvn3087 opened 11 months ago
6
HA not detecting Ratgdo MQTT

#25 mrwkbrdr closed 11 months ago
5
Shipping issue - need contact information to resolve

#24 adude007 closed 11 months ago
1
2.5i board on 2.53, has never actually controlled a thing; doesn’t work!

#23 pcm1ke closed 11 months ago
23
handleImprovPacket is always active delaying the main loop by 25ms

#22 CrazyCoder opened 11 months ago
0
WiFi Doesn't Reconnect after Power Cycle

#21 J-T-W closed 11 months ago
4
Feature Request: Add HA MQTT Autodiscovery for Lockout

#20 starsoccer opened 11 months ago
3
Suggestion: make wall-panel emulation into a configurable feature

#19 p-jean closed 11 months ago
2
secplus 1 GDO can be unreliable if power cycled with RATGDO

#18 p-jean closed 11 months ago
8
RATGDO not controlling opener

#17 timwing closed 1 month ago
55
How are collisions meant to be managed by secplus1?

#16 p-jean closed 11 months ago
1
Possibly incorrect delay for secplus1 in toggleDoor()

#15 p-jean closed 11 months ago
2
MQTT status of "stopped" is misinterpreted by Home Assistant

#14 joeshaw closed 12 months ago
8
ratgdo 2.5 /Security 1.0/dumb button MQTT Light problems

#13 cribbstechnologies closed 11 months ago
6
Periodic status changes when door not opened/closed

#12 lukescott closed 1 year ago
6
GDO open/close and switching remote unlock/lock when ratgdo is rebooted (Sec+ 2.0 LM8355 + 882LM)

#11 monkitrainer closed 1 year ago
2
Contribution doc?

#10 lukescott opened 1 year ago
2
Repurpose open/close/light terminals for reed switch?

#9 lukescott closed 11 months ago
9
Security 1.0+ wall button issues

#8 lukescott closed 11 months ago
38
Make logs accessible thru web server

#7 lukescott opened 1 year ago
3
Feature request/suggestion: status command.

#6 hjdhjd closed 11 months ago
13
Feature request / suggestion: autodiscovery topic.

#5 hjdhjd opened 1 year ago
3
Sec +1 doesn't give door status

#4 dbrewer-wdc closed 11 months ago
18
50ms debounce may be too short for the dry contact open/close limit switches

#3 CrazyCoder opened 1 year ago
25
Please publish the updated arduinoImprovBootstrapper sources

#2 CrazyCoder opened 1 year ago
8
The Links in the Readme don't work

#1 donavanbecker closed 1 year ago
2