HP Probook 440 G4 Hackintosh

This is the guide to install macOS on the HP Probook 440 G4.

macOS Big Sur OpenCore repository
My Laptop Configuration:
CPU: i5-7200U
RAM: 16GB
GPU: Nvidia 930MX / Intel HD 620
WIFI: Broadcom BCM94352Z DW1560
Drive: 500GB SSD
FHD Display
What works:
Wifi
Bluetooth
Intel HD 620 Graphics Acceleration
Brightness
Sleep
Audio via AppleALC
Keyboard with Volume Controls and Brightness controls
Power Management with percentage
Trackpad
What doesn't work:
Nvidia GPU (not supported)
Fingerprint sensor
Camera (I changed SMBIOS from 14,1 to 15,4 camera doesn't work, but audio started to work properly)
Let's Get Started

Prepare:
HP Probook 440 G4
macOS Mojave downloaded from the App Store
atleast 8GB USB stick
USB Wifi adapter or LAN cable
Bios:
open F10
boot menu F9
disabled Secure Boot
disabled VT-d
enabled VTx
USB installer:
connect the USB stick to a device running macOS (Mac or Hackintosh)
open Disk Utility - format USB as Mac OS Extended (Journaled) and rename it to USB
download MacOS Mojave from the Apple App Store

after download open terminal and paste:

sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB

it should take up to 30 minutes
when its done download Clover Bootloader
mount EFI partition in Clover Configurator
then download my EFI Folder
replace my EFI with original EFI on EFI partition
Installation:
turn on laptop and start pressing F9 key (it opens boot menu)
select your USB stick and wait for it to boot
select Install macOS... (use arrows and enter)
after boot select Disk Utility
in left corner click on "view" and select "Show All Devices"
select your drive for Hackintosh
format it as "APFS", scheme "GUID Partition Map"
close Disk Utility and go to Install macOS, select your drive and continue...
when your laptop restarts, be sure it boots to your USB stick
continue the installation
after installation completed, configure Hackintosh setting for your need
Post Instalation:
download Clover Bootloader and install it for UEFI booting only
go here and follow instruction (if it will show to enter the password over and over, then try to add before the command - sudo)
after completing the previous point download my EFI folder
go to Clover Configurator and mount EFI partition on the current boot disk
replace EFI with my EFI
reboot your laptop

Now everything should be working

If trackpad suddenly stops working just hit print screen button on your keyboard (it works as toggle for trackpad)

Enjoy your new hackintosh

richardamare / HpProbook440G4-hackintosh