Riskinfo.lk GeoNode

Installation for development

Create a new virtualenv for riskinfo_lk, install GeoNode and setup your project::

$ mkvirtualenv riskinfo_lk
$ pip install geonode

To install the latest from GeoNode's master branch use the following command::

$ pip install -e git+https://github.com/GeoNode/geonode.git#egg=geonode --upgrade

Setup your GeoNode for usage. Download a geoserver.war to use and start the development server::

$ git clone https://github.com/riskinfo-lk/riskinfo_lk.git 
$ cd riskinfo_lk
$ paver setup # downloads geoserver
$ paver start

Setting up a vagrant box

To configure a local development virtual machine, you will need to have virtualbox and vagrant installed.

Note: You may need to change the IP configuration in the VagrantFile to a valid ip on the local network

For development::

$ vagrant up dev

The basic box will be downloaded automatically and will be provisioned with GeoNode (see the bash script)::

$ vagrant ssh [dev|production]
$ geonode createsuperuser

For a local vagrant based production deploy, you will need to install ansible and the geonode ansible role and then::

$ vagrant up production

Production Deployment

In order to install for production on a remote machine, you will need to install ansible::

$ sudo pip install ansible

Note: It is advisable to install ansible system wide using sudo

Next, you will need to install the ansible role for geonode::

$ ansible-galaxy install ortelius.geonode

Then update /etc/ansible/hosts to include your webservers host or dns entry::

[webservers]

.###.###.

Then you can run the playbook to install GeoNode::

$ ansible-playbook playbook.yml