INA219 Micropython driver

This driver is a clone of an early version of the Adafruit CircuitPython driver, when these were still readable and simple. The only thing changed was the way of reading and writing to the I2C device.

Class

ina = INA219(i2c, *, address=0x40)

Create an instance of the ina219 object.

i2c The I2C object used for communication address The I2C address. The default value is 0x40

The INA219 device will be initialized with the range of 1A/32V.

Methods and properties

current = ina.current

Return the current though the shunt at the configured range.

bus_voltage = ina.bus_voltage

Return the voltage between the shunt's V- connection and GND.

shunt_voltage = ina.shunt_voltage

Return the voltage between the shunt's V+ and V- connections.

set_calibration_32V_2A()

Set the measurement range to 32V and 2A.

set_calibration_32V_1A()

Set the measurement range to 32V and 1A.

set_calibration_16V_400mA()

Set the measurement range to 16V and 400mA.

Example

from machine import I2C
from ina219 import INA219
import time

# Depending on the port, the Pins for SDA and SCL must be specified
# See the MicroPython documentation for your port.
# I2C requires pull-up resistors at SDA and SCL.

i2c = I2C(1)
ina = INA219(i2c)

set_calibration_32V_1A()

while True:
    current = ina.current
    voltage = ina.bus_voltage
    print("{} mA  {} V".format(current, voltage))
    time.sleep(1)