Nuki BT

Nuki lock integration for Home Asistance. This integration communicates directly with Nuki over Bluetooth. No need for bridge.

Background

• This is based on RaspiNukiBridge by dauden1184 and regevbr
• This is heavily inspired by kvj's hass_nuki_ng and technyon's nuki_hub

Setup

{% if not installed %}

Installation:

• Go to HACS -> Integrations
• Click the three dots on the top right and select Custom Repositories
• Enter https://github.com/ronengr/hass_nuki_bt as repository, select the category Integration and click Add
• A new custom integration shows up for installation (Nuki BT) - install it
• Restart Home Assistant

{% endif %}

Configuration:

• Go to Settings -> Devices & Services
• The integration should automatically discover you Nuki lock. You Should see a new Discovered Device, just click on "Configure" to configure it.
  • If no look was discovered, and you know the Nuki's BT address, you can try to add it manually by clicking on "Add Integration"
• Select a Device Name and Client Type
• Enable pairing mode on the Nuki lock by holding down the button on the Nuki Smart Lock for 5 seconds until the LED ring is permanently glowing.
• Select "Pair device automatically"
  • It is possible to configure the device manually, if you have the pairing-information from an already paired device. Use this option only if you know what you are doing. This is mostly ment for development.

Client Type:

hass_nuki_bt can connect to the Nuki lock in 2 ways:

• "Bridge" is the recommended way. This will cause the current Bridge to be unregistered when pairing.
• "App" will allow you to run hass_nuki_bt alongside a Nuki Bridge, but can lead to either device missing updates.

Contributions are welcome!

If you want to contribute to this please read the Contribution guidelines