search

rossta / serviceworker-rails

Use Service Worker with the Rails asset pipeline
MIT License
588 stars 44 forks source link
javascript rails rails-asset-pipeline service-worker sprockets

readme

ServiceWorker::Rails

Build Status Code Climate

Turn your Rails app into a Progressive Web App. Use Service Worker with the Rails asset pipeline or Webpacker

Why?

The Rails asset pipeline makes a number of assumptions about what's best for deploying JavaScript, including asset digest fingerprints and long-lived cache headers - mostly to increase "cacheability". Rails also assumes a single parent directory, /public/assets, to make it easier to look up the file path for a given asset.

Service worker assets must play by different rules. Consider these behaviors:

We want Sprockets or Webpacker to compile service worker JavaScript from ES6/7, CoffeeScript, ERB, etc. but must remove the caching and scoping mechanisms offered by Rails defaults. This is where serviceworker-rails comes in.

Check out the blog post for more background.

Demo

See various examples of using Service Workers in the demo Rails app, Service Worker Rails Sandbox. The source code is also on GitHub.

Features

Installation

Add this line to your application's Gemfile:

gem 'serviceworker-rails'

And then execute:

$ bundle

Or install it yourself as:

$ gem install serviceworker-rails

To set up your Rails project for use with a Service Worker, you either use the Rails generator and edit the generated files as needed, or you can follow the manual installation steps.

Automated setup

After bundling the gem in your Rails project, run the generator from the root of your Rails project.

$ rails g serviceworker:install

The generator will create the following files:

It will also make the following modifications to existing files:

NOTE Given that Service Worker operates in a separate browser thread, outside the context of your web pages, you don't want to include serviceworker.js script in your application.js. So if you have a line like require_tree . in your application.js file, you'll either need to move your serviceworker.js to another location or replace require_tree with something more explicit.

To learn more about each of the changes or to perform the set up yourself, check out the manual setup section below.

Manual setup

Let's add a ServiceWorker to cache some of your JavaScript and CSS assets. We'll assume you already have a Rails application using the asset pipeline built on Sprockets.

Add a service worker script

Create a JavaScript file called app/assets/javascripts/serviceworker.js.erb:

// app/assets/javascripts/serviceworker.js.erb
console.log('[Service Worker] Hello world!');

var CACHE_NAME = 'v1-cached-assets'

function onInstall(event) {
  event.waitUntil(
    caches.open(CACHE_NAME).then(function prefill(cache) {
      return cache.addAll([
        '<%= asset_path "application.js" %>',
        '<%= asset_path "application.css" %>',
        '/offline.html',
        // you get the idea ...
      ]);
    })
  );
}

function onActivate(event) {
  console.log('[Serviceworker]', "Activating!", event);
  event.waitUntil(
    caches.keys().then(function(cacheNames) {
      return Promise.all(
        cacheNames.filter(function(cacheName) {
          // Return true if you want to remove this cache,
          // but remember that caches are shared across
          // the whole origin
           return cacheName.indexOf('v1') !== 0;
        }).map(function(cacheName) {
          return caches.delete(cacheName);
        })
      );
    })
  );
}

self.addEventListener('install', onInstall)
self.addEventListener('activate', onActivate)

For use in production, instruct Sprockets to precompile service worker scripts separately from application.js, as in the following example:

Register the service worker

You'll need to register the service worker with a companion script in your main page JavaScript, like application.js. You can use the following:

// app/assets/javascripts/serviceworker-companion.js

if (navigator.serviceWorker) {
  navigator.serviceWorker.register('/serviceworker.js', { scope: './' })
    .then(function(reg) {
      console.log('[Page] Service worker registered!');
    });
}

// app/assets/javascripts/application.js

// ...
//= require serviceworker-companion

Add a manifest

You may also want to create a manifest.json file to make your web app installable.

// app/assets/javascripts/manifest.json
{
  "name": "My Progressive Rails App",
  "short_name": "Progressive",
  "start_url": "/"
}

You'd then link to your manifest from the application layout:

<link rel="manifest" href="https://github.com/rossta/serviceworker-rails/blob/master/manifest.json" />

Configure the middleware

Next, add a new initializer as show below to instruct the serviceworker-rails middleware how to route requests for assets by canonical url.

# config/initializers/serviceworker.rb

Rails.application.configure do
  config.serviceworker.routes.draw do
    match "/serviceworker.js"
    match "/manifest.json"
  end
end

Precompile the assets

# config/initializers/assets.rb

Rails.application.configure do
  config.assets.precompile += %w[serviceworker.js manifest.json]
end

Test the setup

At this point, restart your Rails app and reload a page in your app in Chrome or Firefox. Using dev tools, you should be able to determine.

  1. The page requests a service worker at /serviceworker.js
  2. The Rails app responds to the request by compiling and rendering the file in app/assets/javascripts/serviceworker.js.erb.
  3. The console displays messages from the page and the service worker
  4. The application JavaScript and CSS assets are added to the browser's request/response Cache.

Using the cache

So far so good? At this point, all we've done is pre-fetched assets and added them to the cache, but we're not doing anything with them yet.

Now, we can use the service worker to intercept requests and either serve them from the cache if they exist there or fallback to the network response otherwise. In most cases, we can expect responses coming from the local cache to be much faster than those coming from the network.

// app/assets/javascripts/serviceworker.js.erb

function onFetch(event) {
  // Fetch from network, fallback to cached content, then offline.html for same-origin GET requests
  var request = event.request;

  if (!request.url.match(/^https?:\/\/example.com/) ) { return; }
  if (request.method !== 'GET') { return; }

  event.respondWith(
    fetch(request)                                        // first, the network
      .catch(function fallback() {
         caches.match(request).then(function(response) {  // then, the cache
           response || caches.match("/offline.html");     // then, /offline cache
         })
       })
  );

  // See https://jakearchibald.com/2014/offline-cookbook/#on-network-response for more examples
}

self.addEventListener('fetch', onFetch);

Configuration

When serviceworker-rails is required in your Gemfile, it will insert a middleware into the Rails middleware stack. You'll want to configure it by mapping serviceworker routes to Sprockets JavaScript assets in an initializer, like the example below.

# config/initializers/serviceworker.rb

Rails.application.configure do
  config.serviceworker.routes.draw do
    # maps to asset named 'serviceworker.js' implicitly
    match "/serviceworker.js"

    # map to a named asset explicitly
    match "/proxied-serviceworker.js" => "nested/asset/serviceworker.js"
    match "/nested/serviceworker.js" => "another/serviceworker.js"

    # capture named path segments and interpolate to asset name
    match "/captures/*segments/serviceworker.js" => "%{segments}/serviceworker.js"

    # capture named parameter and interpolate to asset name
    match "/parameter/:id/serviceworker.js" => "project/%{id}/serviceworker.js"

    # insert custom headers
    match "/header-serviceworker.js" => "another/serviceworker.js",
      headers: { "X-Resource-Header" => "A resource" }

    # maps to serviceworker "pack" compiled by Webpacker
    match "/webpack-serviceworker.js" => "serviceworker.js", pack: true

    # anonymous glob exposes `paths` variable for interpolation
    match "/*/serviceworker.js" => "%{paths}/serviceworker.js"
  end
end

Serviceworker::Rails will insert a Cache-Control header to instruct browsers not to cache your serviceworkers by default. You can customize the headers for all service worker routes if you'd like, such as adding the experimental Service-Worker-Allowed header to set the allowed scope.

config.serviceworker.headers["Service-Worker-Allowed"] = "/"
config.serviceworker.headers["X-Custom-Header"] = "foobar"

Development

After checking out the repo, run bin/setup to install dependencies. Then, run bin/rake to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/rossta/serviceworker-rails. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the Contributor Covenant code of conduct.

License

The gem is available as open source under the terms of the MIT License.