RustSBI is designed as a library to craft a bootable binary or ELF file. However, QEMU provides us a way to load ELF file and implement simple SBI directly, thus RustSBI provides a bootable ELF file for this platform.
To prepare for environment, you should have Rust compiler and QEMU installed. You may install Rust by rustup or using vendor provided rustc and cargo packages. To install QEMU, your may need to use package manager (e.g. apt, dnf etc.) from system distribution to get a proper QEMU software package.
After environment prepared, compile and run with:
cargo qemuWhen running cargo qemu, the test kernel will build and run. Expected output should be:
[rustsbi] RustSBI version 0.4.0-alpha.1, adapting to RISC-V SBI v1.0.0
.______ __ __ _______.___________. _______..______ __
| _ \ | | | | / | | / || _ \ | |
| |_) | | | | | | (----`---| |----`| (----`| |_) || |
| / | | | | \ \ | | \ \ | _ < | |
| |\ \----.| `--' |.----) | | | .----) | | |_) || |
| _| `._____| \______/ |_______/ |__| |_______/ |______/ |__|
[rustsbi] Implementation : RustSBI-QEMU Version 0.2.0-alpha.2
[rustsbi] Platform Name : riscv-virtio,qemu
[rustsbi] Platform SMP : 8
[rustsbi] Platform Memory : 0x80000000..0x88000000
[rustsbi] Boot HART : 6
[rustsbi] Device Tree Region : 0x87e00000..0x87e01a8e
[rustsbi] Firmware Address : 0x80000000
[rustsbi] Supervisor Address : 0x80200000
[rustsbi] pmp01: 0x00000000..0x80000000 (-wr)
[rustsbi] pmp02: 0x80000000..0x80200000 (---)
[rustsbi] pmp03: 0x80200000..0x88000000 (xwr)
[rustsbi] pmp04: 0x88000000..0x00000000 (-wr)
_____ _ _ __ _
|_ _|__ ___| |_ | |/ /___ _ __ _ __ ___| |
| |/ _ \/ __| __| | ' // _ \ '__| '_ \ / _ \ |
| | __/\__ \ |_ | . \ __/ | | | | | __/ |
|_|\___||___/\__| |_|\_\___|_| |_| |_|\___|_|
================================================
| boot hart id | 6 |
| smp | 8 |
| timebase frequency | 10000000 Hz |
| dtb physical address | 0x87e00000 |
------------------------------------------------
[ INFO] Testing `Base`
[ INFO] sbi spec version = 2.0
[ INFO] sbi impl = RustSBI
[ INFO] sbi impl version = 0x400
[ INFO] sbi extensions = [Base, TIME, sPI, HSM, SRST]
[ INFO] mvendor id = 0x0
[ INFO] march id = 0x70200
[ INFO] mimp id = 0x70200
[ INFO] Sbi `Base` test pass
[ INFO] Testing `TIME`
[ INFO] read time register successfully, set timer +1s
[ INFO] timer interrupt delegate successfully
[ INFO] Sbi `TIME` test pass
[ INFO] Testing `sPI`
[ INFO] send ipi successfully
[ INFO] Sbi `sPI` test pass
[ INFO] Testing `HSM`
[ INFO] Testing harts: [0, 1, 2, 3]
[DEBUG] hart 0 started
[DEBUG] hart 0 suspended nonretentive
[DEBUG] hart 1 started
[DEBUG] hart 1 suspended nonretentive
[DEBUG] hart 2 started
[DEBUG] hart 2 suspended nonretentive
[DEBUG] hart 3 started
[DEBUG] hart 3 suspended nonretentive
[DEBUG] hart 0 resumed
[DEBUG] hart 0 suspended retentive
[DEBUG] hart 0 stopped
[DEBUG] hart 1 resumed
[DEBUG] hart 1 suspended retentive
[DEBUG] hart 1 stopped
[DEBUG] hart 2 resumed
[DEBUG] hart 2 suspended retentive
[DEBUG] hart 2 stopped
[DEBUG] hart 3 resumed
[DEBUG] hart 3 suspended retentive
[DEBUG] hart 3 stopped
[ INFO] Testing Pass: [0, 1, 2, 3]
[ INFO] Testing harts: [4, 5, 7]
[DEBUG] hart 4 started
[DEBUG] hart 4 suspended nonretentive
[DEBUG] hart 5 started
[DEBUG] hart 5 suspended nonretentive
[DEBUG] hart 7 started
[DEBUG] hart 7 suspended nonretentive
[DEBUG] hart 4 resumed
[DEBUG] hart 4 suspended retentive
[DEBUG] hart 4 stopped
[DEBUG] hart 5 resumed
[DEBUG] hart 5 suspended retentive
[DEBUG] hart 5 stopped
[DEBUG] hart 7 resumed
[DEBUG] hart 7 suspended retentive
[DEBUG] hart 7 stopped
[ INFO] Testing Pass: [4, 5, 7]
[ INFO] Sbi `HSM` test pass
[ INFO] Testing `DBCN`
Hello, world!
[ INFO] writing slice successfully
[ INFO] reading 0 bytes from console
[ INFO] Sbi `DBCN` test passYou should have cargo-binutils installed.
cargo install cargo-binutilsRun with:
cargo testIt will run RustSBI-QEMU with a test kernel. The test kernel will test all SBI functions, its command emulation and other features. If it succeeds, there would be output like:
running 1 test
Finished dev [unoptimized + debuginfo] target(s) in 0.14s
Compiling test-kernel v0.1.0 (D:\RustProjects\rustsbi-qemu\test-kernel)
Finished dev [unoptimized + debuginfo] target(s) in 0.61s
test run_test_kernel ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 2.31sWhat kind of kernel does this project support?
The rustsbi-qemu project supports raw binary kernels for educational or competition use. This project itself is only a showcase example illustrating how implementations should use RustSBI, it does not include a Linux boot support. You may visit downstream bootloader projects for a Linux capable bootloader.
How to enable hypervisor H extension on QEMU?
You should use these following line of parameters:
command.args(&["-cpu", "rv64,x-h=true"]);... to enable H extension on QEMU software.
The H extension is enabled by default when QEMU version >= 7.0.0.
What is the minimum supported Rust version of this package?
You should build RustSBI-QEMU on nightly at least rustc 1.66.0-nightly (a24a020e6 2022-10-18).
This project is licensed under Mulan PSL v2.
Copyright (c) 2021-2023 RustSBI Team
RustSBI-QEMU is licensed under Mulan PSL v2.
You can use this software according to the terms and conditions of the Mulan PSL v2.
You may obtain a copy of Mulan PSL v2 at:
http://license.coscl.org.cn/MulanPSL2
THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
See the Mulan PSL v2 for more details.