Select Mini 3D Printer Tool Bracket Holder - SD Card Holder

This repository contains an SD Card Holder for the Select Mini Tool Bracket Holder made by eburgess4 (http://www.thingiverse.com/thing:1688459).

Modifying the Design

All source materials were designed using OpenSCAD. Opening any of the .scad files in this repo can be altered with OpenSCAD.

Once modifications are complete, OpenSCAD should be used to render and export the updated model as an .STL file

Slicing and Print Settings

All exported .STL files were sliced using Cura.

The following settings were used:

• Quality
  • Layer Height: 0.1 mm
• Shell
  • Wall Thickness: 0.8 mm
  • Top/Bottom Thickness: 0.8 mm
• Infill
  • Density: 20.0 %
• Material (Note: Used for PLA)
  • Printing Temperature: 195 C
  • Build Plate Temperature: 50 C
  • Diameter: 1.75mm
  • Flow: 100%
  • Enable Retraction: True
• Speed
  • Print Speed: 60 mm/s
  • Travel Speed: 120 mm/s
• Cooling
  • Enable Print Cooling: True
• Support
  • Enable Support: True
  • Support Placement: Everywhere
• Build Plate Adhesion
  • Build Plate Adhesion Type: Skirt

Thingiverse

http://www.thingiverse.com/thing:1803944

Credits

This design is a derivative of the Monoprice MP Select Mini Tool Bracket/Holder by eburgess4, available at http://www.thingiverse.com/thing:1688459 The original design is licensed under the Creative Commons - Attribution license. http://creativecommons.org/licenses/by/3.0/