sandeepmistry node-chip-io issues

sandeepmistry / node-chip-io

Johnny-Five IO Plugin for the Next Thing Co. C.H.I.P.

MIT License

96 stars 28 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Will this work on the Chip Pro board?

#55 lastmjs opened 7 years ago
2
analogRead is not a function

#54 ohpauleez closed 7 years ago
3
Possible to support stepper motors?

#53 Torsten85 closed 7 years ago
1
No nodes work

#52 iccentt closed 7 years ago
2
fix i2cRead arguments if called with Firmata.js API

#51 fivdi closed 7 years ago
1
i2cRead doesn't work when called with 3 arguments

#50 fivdi closed 7 years ago
1
SG90 Servo on PWM0 not working

#49 norgeous opened 7 years ago
1
Fix precision on thermometer

#48 norgeous closed 7 years ago
2
Fixes typo AXP290 -> AXP209 in readme

#47 norgeous closed 7 years ago
0
Fix a tab in pins.json

#46 norgeous closed 7 years ago
0
Add Charge / Discharge amps sensor to features

#45 norgeous closed 3 years ago
2
Fix precision on Voltage sensor

#44 norgeous closed 7 years ago
7
Add battery percentage to features

#43 norgeous closed 3 years ago
3
Add battery percent and current

#42 norgeous opened 7 years ago
4
systemd and chip-io closes the board directly

#41 Auo closed 7 years ago
1
Example issue?

#40 gregwinn closed 7 years ago
36
LCD example

#39 norgeous closed 7 years ago
2
Switch to native module for faster GPIO on R8 pins

#38 sandeepmistry opened 7 years ago
0
Use i2c-bus module for I2C layer

#37 fivdi closed 7 years ago
2
GPIO 0-7 don't require sudo, eh?

#36 Narvey closed 7 years ago
2
Add onboard button and status led example

#35 norgeous closed 7 years ago
1
Move johhny-five to dependencies from devDependencies

#34 deadprogram opened 7 years ago
0
update pins.json so the VCC-1V8 pin can be read as analog. Updated ax…

#33 tyler-g opened 7 years ago
1
missing johnny-five spec functionpingRead

#32 MarioProjects closed 7 years ago
11
missing johnny-five spec functionpingRead on CHIP

#31 MarioProjects closed 7 years ago
0
Faster GPIO

#30 chris-gunawardena opened 7 years ago
11
example onboard-button.js

#29 rootedsoftware closed 7 years ago
2
HTU21D fails with version 2.0.2 but works with 2.0.1

#28 bbx10 closed 7 years ago
16
error in chip-io.js that breaks i2C on some chips [fix in comments]

#27 neilhand closed 8 years ago
2
Use digitalWrite mode for PWM0 when values are 0 and 255

#26 sandeepmistry opened 8 years ago
0
Add support for Onboard Button

#25 sandeepmistry closed 8 years ago
0
PWM0 does not support on state

#24 jmaxxz opened 8 years ago
1
Expose on-board button

#23 norgeous closed 8 years ago
16
Use i2c-bus module for I2C layer

#22 sandeepmistry closed 7 years ago
11
PWM0 appears to implement range incorrectly

#21 jmaxxz closed 8 years ago
6
PCA9685 not working

#20 ericterpstra closed 7 years ago
18
Switch to synchronous I/O (for GPIO and I2C)

#19 sandeepmistry closed 8 years ago
6
installation issues

#18 AnnaNican closed 8 years ago
3
autoscroll() not working

#17 nalakawula closed 8 years ago
9
Add Johnny-Five serial port IO API's

#16 nkolban opened 8 years ago
7
Getting an LCD 16x2 driver working with I2C

#15 nkolban closed 8 years ago
30
Button not working?

#14 Torsten85 closed 8 years ago
7
Why setting all pins to 0 an initialisation?

#13 Torsten85 closed 8 years ago
8
Support user specified I2C bus. Fixes gh-11

#12 rwaldron closed 8 years ago
1
I2C over hard-coded /dev/i2c-1 not working

#11 ugate closed 8 years ago
8
Change i2cRead/i2cWrite from bus 1 to 2

#10 bbx10 closed 8 years ago
3
i2c-1 pins not exposed on PocketCHIP

#9 bbx10 closed 8 years ago
5
Feature Request: Software PWM

#8 ericterpstra opened 8 years ago
21
bugfix: don't mmap `/dev/mem` if `open()` fails

#7 urish closed 8 years ago
1
LCD pin access

#6 ugate closed 8 years ago
15