The PiTalk 4G HAT is a handy, low-power Raspberry Pi HAT that features multi-communication functionalities such as GSM, GPRS, TCP, etc. It allows your Pi to easily make phone calls, send messages, connect to wireless networks, and so on. It is the most convenient IoT HAT that works with all variants of Raspberry Pi (model A, B and Zero). The users can also connect PiTalk with other iOS and Android devices as well. It is primarily designed to offer connection to your IoT projects and applications without requiring a Wi-Fi network or ethernet connections.
Supply voltage: 3.3–4.3 V.
LTE Features:
UMTS Features:
GSM Features:
Internet Protocol Features:
SMS:
For more key features of EG25-G Module click here
To Start working with our PiTalk 4G HAT, set-up your Raspberry Pi or RockPi by flashing their os file and boot it, for this click here.
After setup your Pi board, attach the PiTalk 4 HAT on it and boot by providing compatible power supply.
Now, open the command prompt and type the following command to clone the current repository in your Pi-board.
git clone https://github.com/sbcshop/Pitalk_4G_HAT_Software.git
After, downloading this repository you will see two directory in it. One is of Example code and 2nd one is of Library file.
Now, open the both Example and Library directory. To open these files make sure you have python installed in your Pi board.
In examples Directory there are some example codes to use the different functionality of PiTalk HAT you have move out the example file which you want to run from the Examples directory and after that run the code by make some editing if require.
Connect HAT on Raspberry Pi,
Make sure you have enabled serial interface of Raspberry Pi, if not follow guide : "Serial Interface Enable RPi"
Once Pi is running and HAT is getting power make sure 4G module is on, for this press and hold power key for 3-4 sec. You will get confirmation by network status LED.
Follow setup guide provided here in github : "Steps for 4G HAT Internet on Raspberry Pi"
We have also provided the USB feature in our PiTalk 4G HAT to use this HAT as dongle. For this you have to to install its USB driver provided in this Repository. For this download and unzip the zip file of it and install in your computer system.
After setup it, insert SIM card and attach 4G antenna to it and plugin it in your system via USB type-C cable and press the PWRKEY button for 3-4seconds to activate the module, NETLIGHT will start blinking. If everything goes well it will connect as a cellular network in your system. You can also open the device manager to see COM Port of Quectel device showing as in below image:
This is open source product. Kindly check LICENSE.md file for more information.
Please contact support@sb-components.co.uk for technical support.