Yay for Repaving!

As much as possible is documented inline in this issue template. In case of problems you may find help by viewing all the previous repave issues. Have fun!

Things to do with the existing build

[x] Disable DHCP on the PI

Instructions

Ensure that when we renew our DCHP lease, it comes from our router.

sudo systemctl stop dnsmasq
[x] Enable DHCP on the router and remove port mapping and release/renew IP address

Instructions

Windows: ipconfig /release and then ipconfig /renew
[x] Shutdown PI

Instructions

Make sure the USB drive has spun down before doing any work.

sudo shutdown -h now
[x] Create SD card with the latest Raspberry Pi OS

Instructions

Using the SD card in the now powered down PI.

The new installer has options to enable SSH and create a user.

installer download

note check if the underlying Debian distribution is changing as this might result in some issues in the playbook execution.

The Bullseye 64-bit lite image seems to work for now.

Post OS install steps on desktop

[x] Ensure a working ansible enviroment

Instructions

This will exercise the asdf setup.
[x] Turn on the PI and note the IP obtained from the Router
[x] Clean up old host keys
Instructions

The new instance will have new host keys so to ensure host key warning messages don't distract us from the repaving, run the following:
```
ssh-keygen -R 192.168.2.10
ssh-keygen -R pi
ssh-keygen -R <pi ip>
```
[x] Transfer local public ssh key to PI

Instructions

In order to avoid the use of sshpass, copy the current sessions public ssh key to to ./ssh/authorized_keys of the pi user on the PI. This user is only necessary to run the bootstrap playbook (which creates an admin ansible user) and will be subsequently cleaned up.

ssh-copy-id pi@<pi ip>
[x] Bootstrap with Ansible

Instructions

./ansible.sh and select the bootstrap-playbook.yml
[x] Add the PI port forwarding

Instructions

Needed for the certbot ACME challenge in the next step.
[x] Complete full configuration

Instructions

./ansible.sh and select the main-playbook.yml
[x] Reboot PI
[x] Re-add port mapping to the static IP
[x] Disable DHCP on the router
[x] Deploy goodenoughmoney.com
[x] Create pi Samba user

Instructions

Run the following on the PI sudo smbpasswd -a smbrw
[x] Make this template slightly better

How Do I Know I Am Done?

[x] https://www.goodenoughmoney.com/ displays stuff
[x] https://home.scottmuc.com/music/ loads navidrome and the music is playable
[x] https://home.scottmuc.com/prometheus/ loads and has data
[x] https://home.scottmuc.com/grafana/ loads and has data
[x] Z:\ on my Windows PC works
[x] ipconfig /release and then ipconfig /renew works
[x] nslookup analytics.google.com is refused
[x] Print out newly repaved machine details

Instructions

cat /etc/os-release && uname -a

scottmuc / infrastructure

Rebuild Raspbery PI - Spring 2023 #56

Yay for Repaving!

Things to do with the existing build

Post OS install steps on desktop

How Do I Know I Am Done?