This Project is a DLL that can replace the original dccmtr.dll from a Software that uses the Spyder 4 or 5 Sensor. After replacement the software can use the ArgyllCMS so you can use many other Sensors.
You need the ArgyllCMS on your Computer
I'm not responsible for anything that happens by using this project. Everything happens at your own risk.
Create a backup of the old dccmtr.dll of your software and after that replace it with the dll from this project. If the software can't load the dll its maybe a x64 / x86 missmatch and you have to use the other one. Copy the autocal.ini file in the same folder and change the path of the spotread.exe command to the location of your spotread.exe inside ArgyllCMS. You can get the latest ArgyllCMS from https://www.argyllcms.com/. If you want to test it you can copy & paste the path into a cmd.exe window and check if everything works.
Please note that this project is in alpha status.
If there is anything that does not work please raise an issue with and attach a debug.log. You can generate the debug.log by settings debug=1 in autocal.ini. The file is generated in the same folder as the other files.
Download a precompiled Version from Releases