seb-ma / eInkFrame

A step by step guide to create a weather station (and more) in e-ink frame running with MagicMirror².
19 stars 0 forks source link
eink magicmirror-module magicmirror2 pcb raspberrypi weather-station

Weather station e-ink frame

This is a project (hardware and software parts) designed to have a full Weather station (and many more features) displayed on a e-ink screen put in a photo frame with tactile buttons.

It is done with a Raspberry Pi, a 7.8" e-ink screen, a capacitive touch sensor, a temperature/humidity/pressure/gas sensor and needs a internet connection.

final

Status

This project is fully functional.

Some improvements can be done (see MagicMirror² Installation) and more features may be added in the future (see below).

Hardware

Complete guide is in hardware part.

It includes:

Software

Complete guide is in software part.

It includes:

Features

At this stage, all the ticked features are available (the other features may never be done). It can also be customized by adding new modules (see MagicMirror² Installation).

Basic

Weather/outdoor

Calendar and tasks

Travels

Entertainment

Display

Advanced features (not yet planned)