Open Floyer007 opened 10 years ago
I'd flashed the Turnigy Multistar 30A (http://hobbyking.com/hobbyking/store/__25365__Turnigy_Multistar_30_Amp_Multi_rotor_Brushless_ESC_2_4S.html) with kda.hex and it's getting very hot after a few seconds. One of my ESC burned down and after it my Motor, too.
I'd tried different versions since 2012 and they all have the same problem.
Thank you for fixing this issue.
thank you for reply and for advise me, so I will not buy the atmel cable, I found 4 esc with already simonk firmware on ebay for a total of 20 euro , the same cost of the atmel tool :+1:
I'd flashed the Turnigy Multistar 30A (http://hobbyking.com/hobbyking/store/__25365__Turnigy_Multistar_30_Amp_Multi_rotor_Brushless_ESC_2_4S.html) with kda.hex and it's getting very hot after a few seconds. One of my ESC burned down and after it my Motor, too.
I'd tried different versions since 2012 and they all have the same problem.
Thank you for fixing this issue.