SmartGateIO

Prototype multitier solution, managing chip card access through a gate.

Steps to launch the solution for development and debugging:

1. Connect the Hardware

   • Connect the NodeMCU module to your PC.
   • Use the following wiring https://miliohm.com/rc522-rfid-reader-with-nodemcu/

2. Configure for your local network

   • On the server machine use ipconfig command to find your local IP.
   • In the Properties/launchSettings.json file fill in your local IP where mentioned.
   • In the wwwroot/constants.js file fill in your local IP.
   • In the Firmware/GateModule/constants.h file fill in your local IP and the network credentials.
   3. Launch the app from Visual Studio 2022