search

sipeed / NanoKVM

NanoKVM: Affordable, Multifunctional, Nano RISC-V IP-KVM
GNU General Public License v3.0
3.18k stars 56 forks source link

Video isn't restored after reboot, so I can't see the bootloader #56

Open voltagex opened 1 month ago

voltagex commented 1 month ago

{1E5BC553-1C8E-491A-B020-7CC4F0B1B8E5}

This is the last thing I see with the HDMI capture plugged into my Framework laptop.

wj-xiao commented 1 month ago

Could you check your application version (setting -> About NanoKVM)? Cause a related issue was fixed in version 2.0.7.

wj-xiao commented 1 month ago

Or you can try to close the frame detect CleanShot 2024-09-19 at 10 16 21

voltagex commented 1 month ago

@wj-xiao yes, I'm on 2.0.7.

I have tried disabling Frame Detect.

I think this might be a Framework Laptop issue, I'll try with another system later.

CRCinAU commented 1 month ago

Just to check this - I noticed an Intel NUC will shut off power to the USB ports when rebooting - so if you're not also powering the IP KVM via an external method, the IPKVM will also reboot - meaning you won't see the BIOS screens etc...

Might be worth checking if this is the same problem - ie power your IP KVM from a different USB source.

patschi commented 1 month ago

Might be worth checking if this is the same problem - ie power your IP KVM from a different USB source.

Sorry for off-topic, but I'd like to make aware about this issue on some earlier NanoKVM revisions: https://github.com/sipeed/NanoKVM/issues/40

kcastner commented 1 month ago

Maybe its related to your problem... Issue will be opened later :)

My devices expand the view to the NanoKVM. If i set it to mirror, the NanoKVM wont show any HDMI output anymore. I have to reboot the NanoKVM to get it working again.

It seems that the video input wont be reenabled after any input change. Replug wont work either.

wj-xiao commented 1 week ago

Please update to version 2.1.0 in the webpage. We have added support for H.264.