search

sipeed / NanoKVM

NanoKVM: Affordable, Multifunctional, Nano RISC-V IP-KVM
848 stars 7 forks source link

readme

NanoKVM

![](https://wiki.sipeed.com/hardware/zh/kvm/assets/NanoKVM/1_intro/NanoKVM_3.jpg)

Quick Start | Hardware

English | [中文](./README_ZH.md)

Your NanoKVM Power by RISC-V ! If you have any issues or suggestions, creating issue here, or tell us with MaixHub Discussion.

Introduction

Lichee NanoKVM is an IP-KVM product based on LicheeRV Nano, inheriting the extreme size and powerful features of LicheeRV Nano. The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot, and is recommended for individual users.

Tech Specs

Products NanoKVM (Lite) NanoKVM (Full) PiKVM V4
Compute Units LicheeRV Nano(RISCV) LicheeRV Nano(RISCV) CM4 (ARM)
Resolution 1080P @ 60fps 1080P @ 60fps 1080P @ 60fps
Video encoding MJPEG, H264(developing) MJPEG, H264(developing) MJPEG, H264
Video delay 90～230ms 90～230ms 100～230ms
UEFI/BIOS ✓ ✓ ✓
Virtual HID ✓ ✓ ✓
Virtual CD-ROM ✓ ✓ ✓
IPMI ✓ ✓ ✓
Wake-on-LAN ✓ ✓ ✓
ETH 100M/10M 100M/10M 1000M/100M/10M
ATX power control None，Users can connect by their own USB interface IO control board RJ-45 interface IO control board
OLED None，Users can connect by their own 128x64 0.96" white 128x32 0.91" white
UART 2 2 1
TF Card None ✓ ✓
Expansion None PoE WiFi/LTE
Power consumption 0.2A@5V 0.2A@5V Peak 2.6A@5V
Power input PC USB can be powered PC USB or auxiliary power supply DC 5V 3A power supply is required
Cooling Silent fanless Silent fanless Fan cooling
Size 23x37x15mm
～1/30 PiKVM V4 size		 40x36x36mm
～1/7 PiKVM V4 size		 120x68x44mm

Hardware platform NanoKVM

NanoKVM is based on Sipeed LicheeRV Nano，you can find specifications, schematics, and dimensional drawings here.

The NanoKVM Lite is constructed by the LicheeRV Nano and HDMItoCSI board, and the NanoKVM FULL adds the NanoKVM-A/B board and shell to the NanoKVM Lite. The HDMItoCSI board is used to convert the HDMI signal; NanoKVM-A, including OLED, ATX control output (USB Type-C interface), auxiliary power supply and ATX power on/off and reset buttons; The NanoKVM-B is connected to the plate at one end and the computer at the other end is connected to the computer ATX-Pin, which is used to remotely control the power of the computer.

The NanoKVM image is built on LicheeRV Nano SDK and MaixCDK, and is compatible with materials that use the LicheeRV Nano, opposite the KVM software cannot be used with the LicheeRV Nano or other SG2002 products. If you would like to build an HDMI input application on LicheeRV Nano or MaixCam, please contact us for technical support.

Where to buy

Community