TangNano-9K-example
Question
Error Code RP2017
When you meet error code PR2017. Do what is shown below.(Just enable corresponding IO as regular IO)
Examples
led
Demo project for drive LED and on board led. LED guide is at https://wiki.sipeed.com/hardware/en/tang/Tang-Nano-Doc/examples.html
lcd_led
Demo project for drive RGB LCD and on board led, to drive the 5 inch RGB screen with 800*480 resolution.
lcd_4.3
Demo project for drive RGB LCD and on board led, to drive the 4.3 inch RGB screen with 480*272 resolution.
picotiny
A PicoRV32-based SoC example with HDMI terminal from SimpleVout, SPI Flash XIP from picosoc, and custom UART ISP for flash programming. UART baudrate default at 115200.
See README.md for detailed description.
- Visit https://wiki.sipeed.com/hardware/en/tang/Tang-Nano-9K/examples/picorv/picorv.html to quick run this example
- 中文访问 https://wiki.sipeed.com/hardware/zh/tang/Tang-Nano-9K/examples/picorv/picorv.html 来快速使用
hdmi
Project based on picotiny example, but all soft_core related codes are removed.
spi_lcd
This is an example to drive the 1.14 inch lcd screen which can connect with this board.
Be sure match board with screen in the same order
uart
FPGA uart example, containing 2 uart example messages. Burn into FPGA and open onboard serial port to check the message with 115200 baudrate.
FPGA can not be burned when the serial port is opened.
Internet_learning_resources
Use command git submodule --init update to get the source code.
TangNano9k_tutorial
Source link: https://gitee.com/lanzhoo/TangNano9k_Tutorial.git
Step tutorials to build a softcore running via arduino.
tangnano9k-series-examples
Source link: https://github.com/lushaylabs/tangnano9k-series-examples
Example codes on Tang Nano 9K, read https://learn.lushaylabs.com/tang-nano-series/ to see the usages.