A platform agnostic device driver for the Sensirion SHT4x temperature and
humidity sensor
family.
It is based on embedded-hal
traits and works in no_std
environments.
In theory, it supports all of the sensor family's devices but has only been tested with the SHT40-AD1B so far.
DelayMs
for command execution so that it could be shared
(among multiple sensors)I16F16
from the fixed
cratedefmt
use sht4x::Sht4x;
// Device-specific use declarations.
let mut delay = // Device-specific initialization of delay.
let i2c = // Device-specific initialization of I2C peripheral.
let mut sht40 = Sht4x::new(i2c);
let serial = sht40.serial_number(&mut delay);
defmt::info!("serial number: {}", serial);
let measurement = sht40.measure(Precision::Low, &mut delay);
defmt::info!("measurement: {}", &measurement);
if let Ok(measurement) = measurement {
// Convert temperature measurand into different formats for further
// processing.
let int: i32 = measurement.temperature_milli_celsius();
let fixed: I16F16 = measurement.temperature_celsius();
let float: f32 = measurement.temperature_celsius().to_num();
}
sensor-temp-humidity-sht40 is another driver for this sensor family.
Licensed under either of
Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your discretion.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.