The following example uses step to securely deploy Emojivoto microservice to AWS using mTLS. We'll be using the following technologies:
This example will use automation to provision an instance of Emojivoto.
+--------------+
| BROWSER |
+------+-------+
|
|TLS
|
+------+-------+
| ENVOY |
| | | +------------+
| WEB | | |
| | | TLS+mTLS | CA |
| ENVOY--SDS+-----------------+ |
+------+-------+ +-----+------+
| |
| |
| |TLS+mTLS
mTLS | mTLS |
+----------+----------+ |
| | |
| | |
+-----+-------+ +-----+--------+ |
| ENVOY | | ENVOY | |
| | | | | |
| EMOJI--SDS| | VOTING--SDS+-----------+
+-----------+-+ +--------------+ |
| |
| |
| |
+------------------------------------+This AWS example integration will use full automation to provision infrastructure, machines, and services from scratch. While there are a plethora of tools availabe, Terraform & Puppet were chosen for provisioning. Before kicking off the provisioning process we need to configure AWS (account credentials & permissions), SSH, and Terraform.
Install and configure the AWS CLI. AWS has instructions for installing the CLI on various platforms at: https://docs.aws.amazon.com/cli/latest/userguide/cli-chap-install.html.
Once installed, grab AWS credentials from your account or AWS IAM (depends on what you're using) and follow the interactive steps of the configure command. AWS's documentation has detailed instructions on how to get AWS credentials. Make sure the credentials granted the IAM policies AmazonEC2FullAccess, AmazonVPCFullAccess, and AmazonRoute53FullAccess (broad permissions) or at the minimum permissions as per the policy file included in the repo.
$ aws configure
AWS Access Key ID []: ****************UJ7U
AWS Secret Access Key []: ****************rUg8
Default region name []: us-west-1
Default output format []: json
$ aws s3 ls
# should list S3 buckets if the account has any
2017-10-26 13:50:39 smallstep-not-a-real-bucket
2017-10-26 15:43:20 smallstep-fake-bucket
2018-04-09 17:25:18 smallstep-nobody-homeTerraform requires a key pair to be used for provisioning EC2 machine instances. Any key pair available in the respective region will work as long as the local terraform/puppet process has access to the key pair's private key. Please see the AWS EC2 Key Pairs documentation for details on how to manage key pairs in AWS.
The EC2 key pair will likely be available as a single file in PEM format. Use the following commands to convert the PEM and place the resulting files in locations where terraform and puppet can locate them.
$ chmod 400 aws-e2e-howto.pem
# we will need the public key in terraform config
$ ssh-keygen -f aws-e2e-howto.pem -y > ~/.ssh/terraform.pub
# the private key is already in the correct format
$ cp aws-e2e-howto.pem ~/.ssh/terraform
# new files only readable by owner (not encrypted on disk!)
$ chmod 400 ~/.ssh/terraform*Note: It's not required to use key pairs generated by AWS.
ssh-keygenwill work for anybody who's familiar and prefers local key generation.
Terraform uses a backend (hosted by Hashicorp) to store state information about managed infrastrucutre as well as manage concurrency locks to allow only one team member to perform changes at a time. The CLI needs a user configuration as outlined below. Create a user account and org at app.terraform.io and grab a user token. For more details please see Hashicorp's Terraform CLI docs.
Note: Terraform won't strictly require a backend when being used by a single developer/operator
$ cat ~/.terraformrc
credentials "app.terraform.io" {
token = "<terraform user token goes here>"
}Once the ~/.terraformrc is in place the Terraform backends needs to be initialized. Before running the init command Terraform needs to be configured with the proper workplace, org, and ssh public key.
diff --git a/aws-emojivoto/emojivoto.tf b/aws-emojivoto/emojivoto.tf
index b510dcb..33ff92d 100644
--- a/aws-emojivoto/emojivoto.tf
+++ b/aws-emojivoto/emojivoto.tf
@@ -1,9 +1,9 @@
terraform {
backend "remote" {
- organization = "Smallstep"
+ organization = "<my org>"
workspaces {
- name = "Emojivoto"
+ name = "<my workspace: e.g. Step-AWS-Integration>"
}
}
}
@@ -17,7 +17,7 @@ provider "aws" {
# Create an SSH key pair to connect to our instances
resource "aws_key_pair" "terraform" {
key_name = "terraform-key"
- public_key = "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCVEhUwiAivgdFuu5rOv8ArAMqTA6N56yd5RA+uHdaC0e4MM3TYhUOwox0fV+opE3OKLYdG2+mF/6Z4k8PgsBxLpJxdQ9XHut3A9WoqCEANVfZ7dQ0mgJs1MijIAbVg1kXgYTg/2iFN6FCO74ewAJAL2e8GqBDRkwIueKbphmO5U0mK3d/nnLK0QSFYgQGFGFHvXkeQKus+625IHifat/GTZZmhCxZBcAKzaAWB8dSaZGslaKsixy3EGiY5Gqdi5tQvt+obxZ59o4Jk352YlxhlUSxoxpeOyCiBZkexZgm+0MbeBrDuOMwg/tpcUiJ0/lVomx+dQuIX6ciKIuwnvDhx"
+ public_key = "<SSH Public Key, as in ~/.ssh/terraform.pub>"
}
variable "ami" {Once AWS CLI and Terraform CLI & definitions are in place, we can initialize the workspace on the Terraform backend:
$ terraform init
Initializing the backend...
Backend configuration changed!
Terraform has detected that the configuration specified for the backend
has changed. Terraform will now check for existing state in the backends.
Successfully configured the backend "remote"! Terraform will automatically
use this backend unless the backend configuration changes.
Initializing provider plugins...
Terraform has been successfully initialized!
[...]Now Terraform is ready to go. The apply command will print out a long execution plan of all the infrastructure that will be created. Terraform will prompt for a confirmation (type yes) before executing on the plan. Please note: The completion of this process can take some time.
$ terraform apply
Acquiring state lock. This may take a few moments...
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
Acquiring state lock. This may take a few moments...
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
Acquiring state lock. This may take a few moments...
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
# aws_instance.ca will be created
+ resource "aws_instance" "ca" {
+ ami = "ami-068670db424b01e9a"
+ arn = (known after apply)
+ associate_public_ip_address = true
+ availability_zone = (known after apply)
+ cpu_core_count = (known after apply)
+ cpu_threads_per_core = (known after apply)
+ get_password_data = false
+ host_id = (known after apply)
+ id = (known after apply)
+ instance_state = (known after apply)
+ instance_type = "t2.micro"
+ ipv6_address_count = (known after apply)
+ ipv6_addresses = (known after apply)
+ key_name = "terraform-key"
+ network_interface_id = (known after apply)
+ password_data = (known after apply)
+ placement_group = (known after apply)
+ primary_network_interface_id = (known after apply)
+ private_dns = (known after apply)
+ private_ip = (known after apply)
+ public_dns = (known after apply)
+ public_ip = (known after apply)
+ security_groups = (known after apply)
+ source_dest_check = true
+ subnet_id = (known after apply)
+ tags = {
+ "Name" = "emojivoto-ca"
}
+ tenancy = (known after apply)
[...]
}
Plan: 21 to add, 0 to change, 0 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yesAfter some wait time Terraform will confirm the successful completion, printing out details about the newly created infrastructure:
[...]
aws_instance.web (remote-exec): Info: Creating state file /var/cache/puppet/state/state.yaml
aws_instance.web (remote-exec): Notice: Applied catalog in 39.59 seconds
aws_instance.web (remote-exec): + sudo puppet agent --server puppet.emojivoto.local
aws_instance.web: Creation complete after 2m6s [id=i-0481e26a14f8f74b8]
aws_route53_record.web: Creating...
aws_route53_record.web: Still creating... [10s elapsed]
aws_route53_record.web: Still creating... [20s elapsed]
aws_route53_record.web: Still creating... [30s elapsed]
aws_route53_record.web: Still creating... [40s elapsed]
aws_route53_record.web: Creation complete after 47s [id=ZIAUV5309R860_web.emojivoto.local_A]
Apply complete! Resources: 21 added, 0 changed, 0 destroyed.
Outputs:
ca_ip = 13.57.209.0
emoji_ip = 54.183.41.170
puppet_ip = 54.183.255.218
voting_ip = 54.153.37.230
web_ip = 13.52.182.175AWS Emojivoto is using internal DNS records to resolve hosts for inter-service communication. All TLS certificates are issued for (SANs) the respective DNS name, e.g. web.emojivoto.local or voting.emojivoto.local (please see dns.tf for details).
For this to work on machines without managed external DNS the hostname/IP address mapping needs to be added to /etc/hosts so that hostnames can be verified against server certificates.
$ cat /etc/hosts
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
169.254.169.254 metadata.google.internal # Added by Google
13.52.182.175 web.emojivoto.localAWS Emojivoto leverages an internal CA to secure communication between services so every client must specify the root certificate (root_ca.crt) of the internal CA to trust it explicitly.
$ step certificate inspect --roots root_ca.crt --short https://web.emojivoto.local
X.509v3 TLS Certificate (ECDSA P-256) [Serial: 1993...2666]
Subject: web.emojivoto.local
Issuer: Smallstep Test Intermediate CA
Provisioner: step-sds [ID: Z2S-...gK6U]
Valid from: 2019-07-25T21:13:35Z
to: 2019-07-26T21:13:35Z$ curl -I --cacert root_ca.crt https://web.emojivoto.local
HTTP/1.1 200 OK
content-type: text/html
date: Fri, 26 Jul 2019 00:27:02 GMT
content-length: 560
x-envoy-upstream-service-time: 0
server: envoy
# without --cacert specifying the root cert it will fail (expected)
$ curl -I root_ca.crt https://web.emojivoto.local
curl: (6) Could not resolve host: root_ca.crt
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.haxx.se/docs/sslcerts.html
curl performs SSL certificate verification by default, using a "bundle"
of Certificate Authority (CA) public keys (CA certs). If the default
bundle file isn't adequate, you can specify an alternate file
using the --cacert option.
[...]Navigating a browser to https://web.emojivoto.local/ will result in a big alert warning that Your connection is not private. The reason for the alert is NET::ERR_CERT_AUTHORITY_INVALID which a TLS error code. The error code means that the certificate path validation could not be verified against the locally known root certificates in the trust store. Since the TLS cert for AWS Emojivoto's web service is not using Public Web PKI this is expected. Beware of these warnings. In this particular case where we're using an internal CA it's safe to Proceed to web.emojivoto.local under the Advanced menu.
It is possible to avoid the TLS warning by installing the internal CA's root certificate into your local trust store. The step CLI has a command to do exactly that:
$ sudo step certificate install root_ca.crt
Certificate root_ca.crt has been installed.
X.509v3 Root CA Certificate (ECDSA P-256) [Serial: 1038...4951]
Subject: Smallstep Test Root CA
Issuer: Smallstep Test Root CA
Valid from: 2019-07-12T22:14:14Z
to: 2029-07-09T22:14:14Z
# Navigate browser to https://web.emojivoto.local without warning
$ sudo step certificate uninstall root_ca.crt
Certificate root_ca.crt has been removed.
X.509v3 Root CA Certificate (ECDSA P-256) [Serial: 1038...4951]
Subject: Smallstep Test Root CA
Issuer: Smallstep Test Root CA
Valid from: 2019-07-12T22:14:14Z
to: 2029-07-09T22:14:14Z
# Remove root cert from local trust store. Warning will reappearThank you. We would love to hear about your experience and welcome pull requests. The team continues to innovate on our offerings and new features are coming every couple of weeks so please check back often to follow our progress. Alternatively you can subscribe to our updates here.