Garo Wallbox (EVSE) - HomeAssistant Integration
This is a custom component to allow control of Garo Wallboxes in HomeAssistant.
Support Development
- :coffee: Buy me a coffee
Installation
Install using HACS (recomended)
If you do not have HACS installed yet visit https://hacs.xyz for installation instructions. In HACS go to the Integrations section hit the big + at the bottom right and search for Garo Wallbox.
Install manually
Clone or copy this repository and copy the folder 'custom_components/garo_wallbox' into '
Configuration
Once installed the Garo Wallbox integration can be configured via the Home Assistant integration interface where you can enter the IP address of the device.
Services
Set the mode of the EVSE
Service: garo_wallbox.set_mode |
Parameter | Description | Example |
|---|---|---|---|
| entity_id | Name of the entity to change | sensor.garage_charger | |
| mode | The new mode available modes: On, Off, Schema |
On |
Set the charge limit
Service: garo_wallbox.set_current_limit |
Parameter | Description | Example |
|---|---|---|---|
| entity_id | Name of the entity to change | sensor.garage_charger | |
| limit | The new limit in Ampare | 10 |