The meta-soletta project is a meta-layer for Yocto that contains the needed recipes to cross-compile Soletta and generate images for a target board.
The meta-soletta is being supported by Ostro OS, an open source Yocto-based operating system for IoT devices, and it is the recommended method of using the meta-layer.
The generated images are snapshots of the operating system ready to be booted. Being Ostro-based they contain all the needed software for an easier IoT development.
In this page we include two ways of generating system images: one covers how to build them with Ostro (highly recommended) and the other one covers how to build them with pure Yocto.
Ostro supports the following boards:
To generate the image follow this Ostro documentation: [Ostro Project - Building Images] (https://ostroproject.org/documentation/howtos/building-images.html)
To install the generated image follow this tutorial from Ostro: [Ostro Project - Booting and Installation] (https://ostroproject.org/documentation/howtos/booting-and-installation.html)
Only use this option if you are an advanced user of Yocto and you're sure of what you're looking for. Otherwise the Ostro method is highly recommended.
With pure Yocto we support the following boards:
To generate image with Yocto for MinnowBoard MAX: Building for MinnowBoard MAX
To generate image with Yocto for Intel Edison: [Building for Intel Edison] (https://github.com/solettaproject/soletta/wiki/Creating-an-Edison-Image-with-Yocto)